Global Services Command Reference

Command Hierarchies

•	Customer Commands

•	MRP Commands

•	Service System Commands

•	Oper Group Commands

•	Pseudowire (PW) Commands

•	SDP Commands

•	SAP Commands

•	Ethernet Ring Commands

•	ETH-CFM Configuration Commands

•	ETH Tunnel Commands

•	Show Commands

•	Tools Perform Commands

 

Note: For information on egress multicast group commands, refer to the Layer 2 Services Guide.

 

Customer Commands

config

—

service

—	[no] customer customer-id [create]

—	contact contact-information

—	no contact

—	description description-string

—	no description

—	multi-service-site customer-site-name

—	no multi-service-site customer-site-name

—	assignment {port port-id | card slot-number}

—	no assignment

—	description description-string

—	no description

—

egress

—	[no] agg-rate

—	rate {max | rate}

—

no rate

—	[no] limit-unused-bandwidth

—	[no] queue-frame-based-accounting

—	policer-control-policy policy-name [create]

—	policer-control-policy

—	[no] scheduler-override

—	[no] scheduler scheduler-name

—	parent [weight weight] [cir-weight cir-weight]

—

no parent

—	rate pir-rate [cir cir-rate]

—

no rate

—	scheduler-policy scheduler-policy-name

—	no scheduler-policy

—

ingress

—	policer-control-policy policy-name [create]

—	policer-control-policy

—	[no] scheduler-override

—	[no] scheduler scheduler-name

—	parent [weight weight] [cir-weight cir-weight]

—

no parent

—	rate pir-rate [cir cir-rate]

—

no rate

—	scheduler-policy scheduler-policy-name

—	no scheduler-policy

—	tod-suite tod-suite-name

—	no tod-suite

—	[no] phone phone-number

 

MRP Commands

config

—

service

—

mrp

—	[no] mrp-policy policy-name

—	description description-string

—	no description

—	scope {exclusive | template}

—

no scope

—	default-action {block | allow}

—	[no] entry entry-id

—	description description-string

—	no description

—	[no] match

—	[no] isid value | from value to higher-value

—	action {block | allow | end-station}

—

no action

—	copy mrp-policy source-name to dest-name

—	renum old-entry-id to new-entry-id

 

Service System Commands

config

—

service

—

system

—	bgp-auto-rd-range ip-addr comm-val 1-65535 to 1-65535

—	no bgp-auto-rd-range

 

Oper Group Commands

config

—

service

—	oper-group group-name [create]

—	no oper-group group-name

—	bfd-enable interface interface-name dst-ip ip-address [service service-id]

—	no bfd-enable

—

hold-time

—	group up time | no group up

—	group down time | no group down

config

—

service

—	ies service-id (See the Layer 3 Services Guide)

—	[no] interface ip-int-name

—	monitor-oper-group name

—	no monitor-oper-group name

config

—

service

—	vpls service-id (See the Layer 2 Services Guide)

—	[no] interface ip-int-name

—	monitor-oper-group name

—	no monitor-oper-group

config

—

service

—	vprn service-id (See the Layer 3 Services Guide)

—	site name [create]

—	monitor-oper-group name

—	no monitor-oper-group name

 

 

Pseudowire (PW) Commands

config

—

service

—	pw-routing

—	[no] block-on-peer-fault

—	boot-timer secs

—	no boot-timer

—	local-prefix local-prefix [create]

—	no local-prefix local-prefix

—	advertise-bgp route-distinguisher rd [community community]

—	no advertise-bgp route-distinguisher rd

—	path name [create]

—	no path name

—	hop hop-index ip-address

—	no hop hop-index

—	[no] shutdown

—	retry-count [10..10000]

—	no retry-count

—	retry-timer secs

—	no retry-timer

—	spe-address global-id:prefix

—	no spe-address

—	[no] static-route route-name

config

—

service

—	[no] pw-template policy-id [use-provisioned-sdp] [create]

—	accounting-policy acct-policy-id

—	no accounting-policy

—	[no] auto-learn-mac-protect

—	[no] block-on-peer-fault

—	[no] collect-stats

—	[no] controlword

—	[no] disable-aging

—	[no] disable-learning

—	[no] discard-unknown-source

—

egress

—	filter ipv6 ipv6-filter-id

—	filter ip ip-filter-id

—	filter mac mac-filter-id

—	no filter [ip ip-filter-id] [mac mac-filter-id] [ipv6 ipv6-filter-id]

—	mfib-allowed-mda-destinations

—	[no] mda mda-id

—	qos network-policy-id port-redirect-group queue-group-name [instance instance-id]

—

no qos

—	[no] force-qinq-vc-forwarding

—	[no] force-vlan-vc-forwarding

—	hash-label [signal-capability]

—	no hash-label

—	igmp-snooping

—	[no] fast-leave

—	import policy-name

—

no import

—	last-member-query-interval 1/10 seconds

—	no last-member-query-interval

—	max-num-groups max-num-groups

—	no max-num-groups

—	query-interval seconds

—	no query-interval

—	query-response-interval seconds

—	no query-response-interval

—	robust-count robust-count

—	no robust-count

—	[no] send-queries

—	version version

—	no version

—

ingress

—	filter ipv6 ipv6-filter-id

—	filter ip ip-filter-id

—	filter mac mac-filter-id

—	no filter [ip ip-filter-id] [mac mac-filter-id] [ipv6 ipv6-filter-id]

—	qos network-policy-id fp-redirect-group queue-group-name instance instance-id

—

no qos

—	l2pt-termination [cdp] [dtp] [pagp] [stp] [udld] [vtp]

—	no l2pt-termination

—	limit-mac-move {blockable | non-blockable}

—	no limit-mac-move

—	[no] mac-pinning

—	max-nbr-mac-addr table-size

—	no max-nbr-mac-addr

—	restrict-protected-src alarm-only

—	restrict-protected-src [discard-frame]

—	no restrict-protected-src

—	[no] sdp-exclude group-name

—	[no] sdp-include group-name

—	split-horizon-group group-name [residential-group]

—	no split-horizon-group

—	[no] auto-learn-mac-protect

—	description description-string

—	no description

—	restrict-protected-src alarm-only

—	restrict-protected-src [discard-frame]

—	no restrict-protected-src

—	[no] restrict-unprotected-dst

—

stp

—	[no] auto-edge

—	[no] edge-port

—	link-type {pt-pt | shared}

—	no link-type [pt-pt | shared]

—	path-cost sap-path-cost

—	no path-cost

—	priority stp-priority

—	no priority

—	[no] root-guard

—	[no] shutdown

—	vc-type {ether | vlan}

—	vlan-vc-tag 0..4094

—	no vlan-vc-tag

 

SDP Commands

config

—

service

—	sdp sdp-id [gre | mpls | l2tpv3] [create]

—	no sdp sdp-id

—	accounting-policy acct-policy-id

—	no accounting-policy

—	[no] adv-mtu-override

—	[no] allow-fragmentation

—	[no] bgp-tunnel

—

binding

—	port [port-id | lag-id]

—

no port

—	pw-port pw-port-id [vc-id vc-id] [create]

—	description description-string

—	no description

—

egress

—	[no] shaper int-dest-id int-dest-id

—	pw-sap-secondary-shaper secondary-shaper-name

—	no pw-sap-secondary-shaper

—	vport vport-name

—

no vport

—	monitor-oper-group group name

—	no monitor-oper-group

—	encap-type {dot1q | qinq}

—	no encap-type

—	[no] shutdown

—	vc-type {ether | vlan}

—	no vc-type

—	vlan-vc-tag vlan-id

—	no vlan-vc-tag

—	no pw-port pw-port-id

—	booking-factor percentage

—	no booking-factor

—	class-forwarding [default-lsp lsp-name]

—	no class-forwarding

—	[no] enforce-diffserv-lsp-fc

—	fc {be | l2 | af | l1 | h2 | ef | h1 | nc} lsp lsp-name

—	no fc {be | l2 | af | l1 | h2 | ef | h1 | nc}

—	multicast-lsp lsp-name

—	no multicast-lsp

—	[no] shutdown

—	[no] collect-stats

—	description description-string

—	no description

—	far-end ip-address | ipv6-address| {node-id node-id} [global-id global-id]}

—	no far-end

—	keep-alive

—	hello-time seconds

—	no hello-time

—	hold-down-time seconds

—	no hold-down-time

—	max-drop-count count

—	no max-drop-count

—	message-length octets

—	no message-length

—	[no] shutdown

—	timeout timeout

—	no timeout

—

[no] ldp

—	local-end ip-address|ipv6-address

—	no local-end

—	[no] lsp lsp-name

—	metric metric

—

no metric

—	[no] mixed-lsp-mode

—	[no] revert-time seconds | infinite

—	network-domain network-domain-name

—	no network-domain

—	path-mtu [bytes]

—	no path-mtu bytes

—	pbb-etype [0x0600..0xffff]

—	no pbb-etype

—	[no] sdp-group group-name

—	[no] shutdown

—	signaling [off | tldp|bgp]

—	source-bmac-lsb MAC-lsb control-pw-vc-id vc-id

—	no source-bmac-lsb

—	[no] sr-isis

—	[no] sr-ospf

—	tunnel-far-end ip-address

—	no tunnel-far-end [ip-address]

—	vlan-vc-etype 0x0600..0xffff

—

sdp-group

—	group-name group-name value group-value

—	no group-name group-name

 

SAP Commands

config

—

service

—	apipe (See the Layer 2 Services Guide)

—	sap sap-id [create] [no-endpoint]

—	sap sap-id [create] endpoint endpoint-name

—	no sap sap-id

—	epipe (See the Layer 2 Services Guide)

—	sap sap-id [create] [no-endpoint]

—	sap sap-id [create] endpoint endpoint-name

—	no sap sap-id

—	fpipe (See the Layer 2 Services Guide)

—	sap sap-id [create] [no-endpoint]

—	sap sap-id [create] endpoint endpoint-name

—	no sap sap-id

—	ies (See the Layer 3 Services Guide)

—	sap sap-id [create]

—	no sap sap-id

—	ipipe (See the Layer 2 Services Guide)

—	sap sap-id [create] [no-endpoint]

—	sap sap-id [create] endpoint endpoint-name

—	no sap sap-id

—	vpls (See the Layer 2 Services Guide)

—	sap sap-id [split-horizon-group group-name] [create]

—	no sap sap-id

—	vprn (See the Layer 3 Services Guide)

—	sap sap-id [create]

—	no sap sap-id

—

system

—

ethernet

—	[no] new-qinq-untagged-sap

 

Ethernet Ring Commands

config

—	eth-ring ring-id

—	no eth-ring

—	compatible-version value

—	no compatible-version

—	description long-description-string

—	no description

—	guard-time time

—	revert-time time

—	ccm-hold-time {[down down-timeout] [up up-timeout]}

—	no ccm-hold-time

—	[no] rpl-node {owner | nbr}

—	node-id mac

—	[no] sub-ring {virtual-link | non-virtual-link}

—	[no] interconnect {ring-id ring-id | vpls}

—	[no] propagate-topology-change

—	path {a | b} [{port-id | lag-id} raps-tag qtag1[.qtag2]]

—	no path {a | b}

—	description long-description-string

—	no description

—	[no] rpl-end

—

eth-cfm

—	[no] mep mep-id domain md-index association ma-index

—	[no] ccm-enable

—	[no] ccm-ltm-priority priority

—	[no] eth-test-enable

—	test-pattern {all-zeros | all-ones} [crc-enable]

—	no test-pattern

—	bit-error-threshold bit-errors

—	mac-address mac-address

—	mac-address

—	one-way-delay-threshold time

—	[no] shutdown

—	[no] shutdown

—	[no] shutdown

 

ETH-CFM Configuration Commands

config

—

eth-cfm

—	domain md-index [format {dns | mac | none | string}] name md-name level level

—	domain md-index

—	no domain md-index

—	association ma-index [format {icc-based| integer | string | vid | vpn-id}] name ma-name

—	association ma-index

—	no association ma-index

—	auto-mep-discovery

—	[no] auto-mep-discovery

—	[no] bridge-identifier bridge-id

—	id-permission {chassis}

—	no id-permission

—	mhf-creation {default | none | explicit | static}

—	no mhf-creation

—	mip-ltr-priority priority

—	no mip-ltr-priority

—	vlan vlan-id

—

no vlan

—	ccm-interval {10ms | 100ms | 1 | 10 | 60 | 600}

—	no ccm-interval

—	[no] ccm-hold-time

—	ccm-hold-time

—	remote-mepid mep-id remote-mac {unicast-da | default}

—	[no] remote-mepid mep-id

—	redundancy

—

mc-lag

—	[no] propagate-hold-time seconds

—	[no] standby-mep-shutdown

—

slm

—	[no] inactivity-timer timeout

—

system

—	grace-tx-enable

 

ETH Tunnel Commands

config

—	eth-tunnel tunnel-index

—	no eth-tunnel tunnel-index

—	ccm-hold-time {down down-timeout | up up-timeout}

—	no ccm-hold-time

—	description long-description-string

—	no description

—

ethernet

—	encap-type {dot1q|qinq}

—	no encap-type

—	mac ieee-address

—

no mac

—	lag-emulation

—

access

—	adapt-qos {distribute | link | port-fair}

—	no adapt-qos

—	[no] per-fp-ing-queuing

—	path-threshold num-paths

—	no path-threshold

—

path

—	control-tag qtag[.qtag]

—	no control-tag

—	description description-string

—	no description

—

eth-cfm

—	[no] mep mep-id domain md-index association ma-index

—	[no] ccm-enable

—	ccm-ltm-priority priority

—	no ccm-ltm-priority

—	ccm-padding-size ccm-padding

—	no ccm-padding-size

—	[no] control-mep

—	description description-string

—	no description

—	[no] eth-test-enable

—	bit-error-threshold bit-errors

—	test-pattern {all-zeros | all-ones} [crc-enable]

—	no test-pattern

—	low-priority-defect {allDef|macRemErrXcon|remErrXcon|errXcon|xcon|noXcon}

—	mac-address mac-address

—	no mac-address

—	one-way-delay-threshold seconds

—	[no] shutdown

—	member port-id

—

no member

—	precedence {primary|secondary}

—	[no] shutdown

—	protection-type {g8031-1to1|loadsharing}

—	revert-time time

—	no revert-time

—	[no] shutdown

 

Show Commands

show

—

service

—	customer [customer-id] [site customer-site-name]

—	l2-route-table [detail] [bgp-ad] [multi-homing] [bgp-vpls] [bgp-vpws] [all-routes]

—	id id base

—

bgp

—	provider-tunnel

—

sdp

—	id sap base

—	id service vpls-group

—	id service vpls-group vpls-group-id non-template-saps

—	id mac-notification

—

id mrp

—	id sap mrp

—	id mvrp vlan

—	id mvrp vlan detailed

—	isid-using [ISID]

—	l2-route-table [detail] [bgp-ad] [multi-homing] [bgp-vpls][bgp-vpws] [all-routes]

—

sap-using

—	sap-using [msap] [dyn-script] [description]

—	sap-using [sap sap-id] [vlan-transaction | anti-spoof]

—	sap-using app-profile app-profile name

—	sap-using authentication-policy policy-name [msap]

—	sap-using encap-type encap-type

—	sap-using eth-cfm collect-lmm-stats [sap sap-id]

—	sap-using eth-ring [ring-id eth-ring-id]

—	sap-using eth-tunnel [tunnel-id eth-tunnel-id]

—	sap-using ingress|egress atm-td-profile td-profile-id

—	sap-using ingress|egress filter filter-id

—	sap-using ingress|egress qos-polify qos-policy-id [msap]

—	sap-using interface ip-address|ip-int-name [msap]

—	sap-using mc-ring peer ip-address ring sync-tag

—	oper-group group-name

—	pw-routing {local-prefix|static-route|paths|all}

—	pw-routing route-table [all-routes]

—	pw-routing route-table summary

—	pw-sap-using

—	pw-template

—	saii-type2-using global-id[:prefix[:ac-id]]

—	sdp sdp-id pw-port [pw-port-id]

—	sdp [consistent|inconsistent|na] egressifs

—	sdp sdp-id keep-alive-history

—	sdp far-end ip-address keep-alive-history

—	sdp [sdp-id] [detail]

—	sdp far-end ip-address [detail]

—	sdp-group group-name

—	sdp-group-using

—	sdp-group [sdp-id[:vc-id] | far-end ip-address]

—	sdp-using [sdp-id[:vc-id] | far-end ip-address]

—	service-using [epipe] [ies] [vpls] [vprn] [mirror] [b-vpls] [i-vpls] [m-vpls] [apipe] [fpipe] [ipipe] [sdp sdp-id] [customer customer-id]

—

system

—	bgp-auto-rd

—	bgp-route-distinguisher

—	taii-type2-using global-id[:prefix[:ac-id]]

—

template

—	vpls-template

—	vpls-template template-name

—	vpls-template-using template-name

—	vpls-sap-template

—	vpls-sap-template template-name

—	vpls-sap-template-using template-name

—	eth-tunnel {aps|status}

—	eth-tunnel tunnel-index [path path-index] [detail]

—	eth-tunnel

—

eth-cfm

—	association [ma-index] [detail]

—	cfm-stack-table [port [port-id [vlan vlan-id]]|sdp sdp-id[:vc-id]][level 0..7] [direction up | down]

—	cfm-stack-table

—	cfm-stack-table port [{all-ports | all-sdps | all-virtuals}][level 0..7][direction up | down]

—	cfm-stack-table port-id [vlan qtag[.qtag]] [level 0..7] [direction up |down]

—	cfm-stack-table sdp sdp-id[:vc-id] [level 0..7][direction up | down]

—	cfm-stack-table virtual service-id [level 0..7]

—	cfm-stack-table facility [{all-ports|all-lags|all-lag-ports|all-tunnel-meps| all-router-interfaces}] [level 0..7] [direction up|down]

—	cfm-stack-table facility collect-lmm-stats

—	cfm-stack-table facility lag id [tunnel 1..4094] [level 0..7] [direction up|down]

—	cfm-stack-table facility port id [level 0..7] [direction up|down]

—	cfm-stack-table facility router-interface ip-int-name [level 0..7] [direction up|down]

—	domain [md-index] [association ma-index | all-associations] [detail]

—	mep mep-id domain md-index association ma-index [loopback] [linktrace]

—	mep mep-id domain md-index association ma-index remote-mepid mep-id | all-remote-mepids

—	mep mep-id domain md-index association ma-index eth-test-results [remote-peer mac-address]

—	mep mep-id domain md-index association ma-index one-way-delay-test [remote-peer mac-address]

—	mep mep-id domain md-index association ma-index two-way-delay-test [remote-peer mac-address]

—	mep mep-id domain md-index association ma-index two-way-slm-test [remote-peer mac-address]

—

mip

—	system-config

 

Tools Perform Commands

tools

—

perform

—

service

—	id service-id

—	admin-lock

—

pw

—	sdpsdp-id:vc-id admin-lock [test-svc-id id]

—

loopback

—

eth

—	sap sap-id start mode [mac-swap [mac ieee-address [all]]]

—	sap sap-id stop

—	sdp sdp-id:vc-id start mode [mac-swap [mac ieee-address [all]]]

—	sdp sdp-id:vc-id stop

—

pw

—	sdpsdp-id:vc-id {start | stop}