For feedback, use the following:
ipd_online_feedback@alcatel-lucent.com
Table of Contents Previous Next Index PDF

WIFI Aggregation and Offload Command Reference
Command Hierarchies
dynamic-services
Syntax 
dynamic-services
Context 
config>service
Description 
This command enables the context to configure dynamic data services. Only available on systems with multi-core CPM (CPM3 or up).
dynamic-services-policy
Syntax 
dynamic-services-policy dynsrv-policy-name [create]
no dynamic-services-policy dynsrv-policy-name
Context 
config>service>dynsvc
Description 
This command creates a new dynamic services policy that can be used to create dynamic data services.
The no form of the command removes the dynamic services policy from the configuration. This is only allowed when there are no active dynamic data services referencing this policy.
Default 
none
Parameters 
dynsrv-policy-name
Specifies a unique name of a dynamic services policy up to 32 characters in length.
accounting-1
Syntax 
accounting-1
Context 
config>service>dynsvc>policy
Description 
This command enables the context to configure the first RADIUS accounting destination and corresponding RADIUS accounting parameters for dynamic data services.
accounting-2
Syntax 
accounting-2
Context 
config>service>dynsvc>policy
Description 
This command enables the context to configure the second RADIUS accounting destination and corresponding RADIUS accounting parameters for dynamic data services.
server-policy
Syntax 
server-policy policy-name
no server-policy
Context 
config>service>dynsvc>acct-1
config>service>dynsvc>acct-2
Description 
This command configures the radius server policy to be used for dynamic data services RADIUS accounting.
The no form of the command removes the radius server policy from the configuration. This is only allowed when there are no active dynamic data services referencing this policy.
Default 
no server-policy
Parameters 
policy-name
Specifies the nname of the radius server policy.
Values
max length = 32 characters.
stats-type
Syntax 
stats-type {time|volume-time}
no stats-type
Context 
config>service>dynsvc>acct-1
config>service>dynsvc>acct-2
Description 
This command configures the type of statistics to be reported in dynamic data services RADIUS accounting. A RADIUS specified Stats Type overrides the CLI configured value.
The no form of the command resets the default value.
Default 
volume-time
Parameters 
time
Only report Session-Time in the RADIUS Acounting Interim-Update and Stop message.
volume-time
Report both Session-Time and Volume counter attributes in the RADIUS. Acounting Interim-Update and Stop messages.
update-interval
Syntax 
update-interval [hrs hours] [min minutes] [days days]
no update-interval
Context 
config>service>dynsvc>acct-1
config>service>dynsvc>acct-2
Description 
This command specifies the interval between each RADIUS Accounting Interim-Update message (minimum 5 minutes; maximum 180 days).
The no form of the command disables the sending of Accounting Interim-Update messages.
A RADIUS specified Accounting Interim Interval overrides the CLI configured value.
Default 
no update-interval (do not send Accounting Interim-Update messages)
Parameters 
hrs
specifies the interval in hours.
Values
1 — 23
min
Specifies the interval in minutes.
Values
1 — 59
days
specifies the interval in days.
Values
1 — 180
update-interval-jitter
Syntax 
update-interval-jitter absolute seconds
no update-interval-jitter
Context 
config>service>dynsvc>acct-1
config>service>dynsvc>acct-2
Description 
This command specifies the absolute maximum random delay introduced on the update interval between two RADIUS Accounting Interim Update messages. The effective maximum random delay value is the minimum of the configured absolute jitter value and 10% of the configured update-interval.
A value of zero will send the accounting interim update message without introducing an additional random delay.
The no form of the command sets the default to 10% of the configured update-interval.
Default 
no update-interval-jitter (10% of the configured update-interval)
Parameters 
seconds
Specifies the absolute maximum jitter value in seconds.
Values
0 — 3600
cli-user
Syntax 
cli-user name
no cli-user
Context 
config>service>dynsvc>policy
Description 
This command specifies the CLI user to be used to execute the dynamic data services CLI scripts. Via the specified user’s profile, it is possible to further restrict the internal list of allowed commands to be executed via dynamic data service CLI scripts.
The no form of the command sets the CLI user to an internal user with all configuration rights.
Default 
no cli-user
Parameters 
name
Specifies the CLI user name that must exist in the >config>system>security CLI context.
description
Syntax 
description description-string
no description
Context 
config>service>dynsvc>policy
Description 
The description command associates a text string with a configuration context to help identify the content in the configuration file.
The no form of this command removes the string from the configuration.
Default 
no description
Parameters 
description-string
The description character string. Allowed values are any string up to 80 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
sap-limit
Syntax 
sap-limit [0..131072]
no sap-limit
Context 
config>service>dynsvc>policy
Description 
This command specifies a limit for the number of dynamic data service instances (SAPs) that can be setup simultaneously using a given dynamic services policy.
A value of zero (0) means the policy will be drained: existing dynamic data services can be modified and torn down but no new dynamic data services can be setup.
Default 
sap-limit 1
Parameters 
[0..131072]
Specifies the number of dynamic data service SAPs that can be setup simultaneously using this dynamic services policy.
Values
0 — 131072
script-policy
Syntax 
script-policy name
no script-policy
Context 
config>service>dynsvc>policy
Description 
This command specifies the radius script policy to be used to setup the dynamic data services. The script-policy configuration cannot be changed when there are active dynamic data services referencing the policy.
The no form of this command removes the script-policy from the configuration. This is only allowed when there are no active dynamic data services referencing this policy.
Default 
no script-policy
Parameters 
name
Specifies the radius script policy name.
service-range
Syntax 
service-range service-id service-id
no service-range
Context 
config>service>dynsvc
Description 
This command specifies the service id range that is reserved for dynamic data service creation. The range cannot overlap with existing static configured services. Once configured with active dynamic services in the range, the service-range can only be extended at the end.
The no form of this command removes the service-range from the configuration. This is only allowed when there are no active dynamic data services.
When no service-range is specified, the setup of dynamic data services will fail.
Default 
no service-range
Parameters 
service-id
Specifies the start and end service-id to define the service-range for dynamic services.
Values
1 — 2147483647
timers
Syntax 
timers
Context 
config>service>dynsvc
Description 
This command enables the context to configure dynamic data services related timers.
setup-timeout
Syntax 
setup-timeout access-accept timeout
no setup-timeout
Context 
config>service>dynsvc>timers
Description 
This command specifies the time that dynamic data services setup requests from a RADIUS Access-Accept are hold in an internal work queue waiting to be processed. If after the timeout, the dynamic data service setup request is still in the queue (meaning it is not setup), then the dynamic service setup request will be removed from the queue and the setup fails.
The no form of this command resets the timeout to 2 seconds.
Default 
no setup-timeout (30 seconds)
Parameters 
timeout
Specifies the setup-timeout in seconds for setup requests of dynamic services received via Access-Accept.
Values
2 — 3600 seconds
dynsvc-password
Syntax 
dynsvc-password password [hash|hash2]
no dynsvc-password
Context 
config>system>security>password
Description 
NOTE: See also the description for the enable-dynamic-services-config command.
This command allows a user with admin permissions to configure a system wide password which enables a user to enter a special dynamic services configuration mode.
The minimum length of the password is determined by the minimum-length command. The complexity requirements for the password are determined by the complexity command.
The no form of the command removes the dynsvc password from the configuration
Default 
no dynsvc-password
Parameters 
password
Configures the password which enables a user to enter a special dynamic services configuration mode. The maximum length can be up to 20 characters if unhashed, 32 characters if hashed, 54 characters if the hash2 keyword is specified.
hash
Specifies the key is entered in an encrypted form. If the hash parameter is not used, the key is assumed to be in a non-encrypted, clear text form.
hash2
— Specifies the key is entered in a more complex encrypted form. If the hash2 parameter is not used, the key is assumed to be in a non-encrypted, clear text form.
enable-dynamic-services-config
Syntax 
[no] enable-dynamic-services-config
Context 
<global>
Description 
NOTE: See also the description for the dynsvc-password command.
If the dynsvc-password is configured in the config>system>security>password context, then any user can enter a special dynamic services configuration mode by entering the enable-dynamic-services-config command.
The enable-dynamic-services-config command is not in the default profile. To give access to this command, the user must belong to the administrative profile or a new profile should be created.
Once the enable-dynamic-services-config command is entered, the user is prompted for a password. If the password matches, the user is given access to the dynamic services configuration. Access to static configuration is in this case prohibited.
To verify that a user is in the enable-dynamic-services-config mode, use the show users command. Users in the enable-dynamic-services-config mode lists the letter “D” next to the user’s CLI session.
The no form of this command disables the dynamic services configuration mode for this user.
Default 
no enable-dynamic-services-config
 
Show Commands
dynamic-services
Syntax 
dynamic-services
Context 
show>service
Description 
This command enables the context to show dynamic services information.
dynamic-services-policy
Syntax 
dynamic-services-policy [policy-name]
Context 
show>service>dynsvc
Description 
This command displays the dynamic services policy information.
Parameters 
policy-name
specifies for which dynamic services policy the information is requested.
Sample Output
# show service dynamic-services dynamic-services-policy "dynsvc-policy-1" 
===============================================================================
Dynamic Service Policies
===============================================================================
Dynamic Service Policy      : dynsvc-policy-1
-------------------------------------------------------------------------------
cli-user                    : (Not Specified)
description                 : Dynamic Services Policy 1
script-policy               : script-policy-5
sap-limit                   : 2000
 
Accounting instance 1
Stats type                  : volume-time
server policy               : aaa-server-policy-1
Update interval (minutes)   : 30
Update interval jitter      : 180s
 
Accounting instance 2
Stats type                  : time
server policy               : aaa-server-policy-2
Update interval (minutes)   : 0
Update interval jitter      : 10%
-------------------------------------------------------------------------------
No. of Services-policies: 1
=============================================================================== 
 
root-objects
Syntax 
root-objects
Context 
show>service>dynsvc
Description 
This command displays the root objects created by dynamic data services.
OID prefix and index — The corresponding SNMP OID prefix and index for this root object.
Snippet name — The name of the python function that created this root object. The name is set to N/A when the root-object is orphaned.
Snippet instance — The instance for which the python function with “Snippet name” created this root object. If the snippet is a result from a dynamic reference, then the snippet instance is the reference-id string passed in the dyn.reference(). If the snippet is not the result from a dynamic reference, then the snippet instance is the dynamic data service SAP-ID. The instance is set to N/A when the root object is orphaned.
Orphan time — Shows the timestamp when the root-object became orphaned (root-object not deleted when corresponding teardown function is called) or N/A if the root-object is not orphaned.
Sample Output
# show service dynamic-services root-objects 
===============================================================================
Dynamic Service Root Objects
===============================================================================
OID prefix                  : svcRowStatus
OID index                   : .100000
Snippet name                : vprn
Snippet instance            : VRF-1
Orphan time                 : N/A
-------------------------------------------------------------------------------
No. of Root Objects: 1
=============================================================================== 
 
saps
Syntax 
saps [control-session acct-session-id] [port port-id] [dynsvc-policy policy-name] [summary] [orphaned] [sap sap-id] [svc-id service-id]
Context 
show>service>dynsvc
Description 
This command displays the dynamic services SAPs (instances) details:
•
SAP — The dynamic service SAP id.
•
Acct session-ID — The dynamic service accounting session id.
•
Acct session-ID control — The control channel accounting session id.
•
Service — The dynamic service id.
•
Orphaned — Yes/No – orphaned state is when the SAP is not deleted when corresponding dynamic service teardown function was called.
•
Dynamic Services policy — The policy referenced to setup the dynamic service.
•
Number of scripts executed — The number of times the script was executed for this dynamic service (setup, modify, revert or teardown).
•
Number of scripts w success — The number of times the script was executed successfully for this dynamic service.
•
Last script action — The setup, modify, revert, teardown.
•
Time of last script action — The timestamp.
•
Parameters of last action — The content of the Dynamic Services Script Parameters attribute corresponding with the last action.
•
For each of the two accounting instances:
–
Status — RADIUS accounting enabled or disabled.
–
Stats type — the type of statistics reported in accounting.
•
Update interval (minutes) — the interval between Accounting Interim Update messages.
Parameters 
summary
Displays a summary view only.
orphaned
Displays only SAPs in the orphaned state.
Filtering options, display SAPs that belong to the specified:
control-session acct-session-id
Specifies control session accounting session id
port port-id
Specifies Ethernet port.
dynsvc-policy policy-name
Specifies dynamic services policy.
sap sap-id
Specifies dynamic services SAP id.
svc-id service-id
- service ID of the dynamic service.
Sample Output
# show service dynamic-services saps 
===============================================================================
Dynamic Services SAP's
===============================================================================
SAP                         : 1/1/1:1.901
-------------------------------------------------------------------------------
Acct session-ID             : 242FFF000001AE512CE4B6
Acct session-ID control     : 242FFF000001AB512CE4B6
Service                     : [100000]
Orphaned                    : no
Dynamic Services policy     : dynsvc-policy-1
Number of scripts executed  : 1
Number of scripts w success : 1
Last script action          : setup
Time of last script action  : 2013/02/26 16:37:10
Parameters of last action   : vprn_1={'t':('VRF-1',65000,1000,'cpe-int-1','192.
                            : 168.20.1/24','2001:db8:cafe::1/64',901,901,910,92
                            : 0,'192.168.20.0/24','192.168.20.2')}
 
Accounting instance 1
Status                      : enabled
Stats type                  : volume-time
Update interval (minutes)   : 30
 
Accounting instance 2
Status                      : enabled
Stats type                  : time
Update interval (minutes)   : 0
 
-------------------------------------------------------------------------------
No. of SAP's: 1
===============================================================================
 
 
# show service dynamic-services saps summary 
 
===============================================================================
Dynamic Services SAP's summary
===============================================================================
SAP                            Acct-Session-ID        Acct-Session-ID-Ctrl   
-------------------------------------------------------------------------------
1/1/1:1.901                    242FFF000001AE512CE4B6 242FFF000001AB512CE4B6  
-------------------------------------------------------------------------------
No. of SAP's: 1
===============================================================================
 
script
Syntax 
script
Context 
show>service>dynsvc
Description 
This command enables the context to show dynamic services script information.
snippets
Syntax 
snippets [detail]
snippets name snippet-name [instance snippet-instance] [detail]
Context 
show>service>dynsvc>script
Description 
This command displays the dynamic services snippets information.
The CLI output generated by a single dynamic service python function call is a snippet instance.
The name of the snippet instance is the function key in the dyn.action() dictionary that caused this function to be called. This name is the dictionary name passed via RADIUS for top-level snippets or the first parameter to dyn.reference() for the others.
The snippet instance is either the dynamic data service SAP id or if the function is called via dynamic reference, the reference-id (that is, second parameter) provided in the dyn.reference() call.
Parameters 
detail
display detailed dynamic services snippet information.
Filtering options, display dynamic services snippets information that matches:
name snippet-name
Specifies the snippet name.
instance snippet-instance
Specifies the snippet instance.
Sample Output
# show service dynamic-services script snippets 
===============================================================================
Dynamic Services Snippets
===============================================================================
Name                       Instance                      Ref-count  Dict-len
-------------------------------------------------------------------------------
vprn                       VRF-1                         1          75
vprn_1                     1/1/1:1.901                   0          190
-------------------------------------------------------------------------------
No. of Snippets: 2
===============================================================================
 
 
# show service dynamic-services script snippets detail 
===============================================================================
Dynamic Service Snippets
===============================================================================
Snippet            : vprn:VRF-1
-------------------------------------------------------------------------------
reference-count    : 1
dictionary-length  : 75
 
Root-object
-----------
oid                : svcRowStatus.100000
 
Reserved-id
-----------
id                 : service-id:100000
-------------------------------------------------------------------------------
Snippet            : vprn_1:1/1/1:1.901
-------------------------------------------------------------------------------
reference-count    : 0
dictionary-length  : 190
 
Referenced-snippet
------------------
snippet            : vprn:VRF-1
-------------------------------------------------------------------------------
No. of Snippets: 2
===============================================================================
 
statistics
Syntax 
statistics
Context 
show>service>dynsvc>script
Description 
This command displays dynamic service script statistics. Only non-zero values are shown.
The script statistics can be cleared with the “clear service statistics dynamic-services” command.
Sample Output
# show service dynamic-services script statistics 
===============================================================================
Dynamic Services Script Statistics
===============================================================================
Description                                                         Counter
-------------------------------------------------------------------------------
python scripts with 0 retries due to timeout                        46
setup    - jobs launched                                            16
setup    - jobs handled                                             16
setup    - success                                                  13
setup    - syntax error                                             1
setup    - execution failed                                         2
teardown - jobs launched                                            15
teardown - jobs handled                                             15
teardown - success                                                  14
teardown - syntax error                                             1
-------------------------------------------------------------------------------
No. of Script Statistics: 10
-------------------------------------------------------------------------------
Last Cleared Time: 02/26/2013 09:59:07
=============================================================================== 
 
summary
Syntax 
summary
Context 
show>service>dynsvc
Description 
This command displays the global configuration summary for dynamic services:
•
Service range
•
Timers
Sample Output
# show service dynamic-services summary 
===============================================================================
Dynamic Services Summary
===============================================================================
range start                 : 100000
range end                   : 200001
setup timeout Access Accept : 30
===============================================================================
 
sap-using
Syntax 
sap-using [msap] [dyn-script] [description]
Context 
show>service
Description 
This command displays SAP information.
Parameters 
dyn-script
Displays dynamic service SAPs information.
Sample Output
# show service sap-using dyn-script 
===============================================================================
Service Access Points 
===============================================================================
PortId                          SvcId      Ing.  Ing.    Egr.  Egr.   Adm  Opr
                                           QoS   Fltr    QoS   Fltr        
-------------------------------------------------------------------------------
[1/1/1:1.901]                   [100000]   901   ip4     901   ip4    Up   Up
-------------------------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------------------------
Number of Dynamic Service SAPs : 1, indicated by [<sap-id>] [<svc-id>]
-------------------------------------------------------------------------------
===============================================================================
 
 
# show service sap-using dyn-script description 
===============================================================================
Service Access Points 
===============================================================================
PortId                             SvcId        Adm  Opr  Description
-------------------------------------------------------------------------------
[1/1/1:1.901]                      [100000]     Up   Up   This is a dynamic
                                                          service SAP
-------------------------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------------------------
Number of Dynamic Service SAPs : 1, indicated by [<sap-id>] [<svc-id>]
-------------------------------------------------------------------------------
===============================================================================
 
Clear Command
dynamic-services
Syntax 
dynamic-services
Context 
clear>service>stats
Description 
This command resets the dynamic services script statistics. See also show service dynamic-services script statistics.
 
Debug Commands
dynamic-services
Syntax 
[no] dynamic-services
Context 
debug
Description 
This command enables the context to configure dynamic services debugging.
scripts
Syntax 
scripts
Context 
debug>dynsvc
Description 
This command enables the context to configure dynamic services script debugging.
event
Syntax 
[no] event
Context 
debug>dynsvc>scripts
debug>dynsvc>scripts>inst
debug>dynsvc>scripts>script
Description 
This command enables/disables the generation of all dynamic data service script debugging events output: cli, errors, executed-cmd, warnings, state-change.
cli
Syntax 
[no] cli
Context 
debug>dynsvc>scripts>event
debug>dynsvc>scripts>inst>event
debug>dynsvc>scripts>script>event
Description 
This command enables/disables the generation of a specific dynamic data service script debugging event output: cli.
errors
Syntax 
[no] errors
Context 
debug>dynsvc>scripts>event
debug>dynsvc>scripts>inst>event
debug>dynsvc>scripts>script>event
Description 
This command enables/disables the generation of a specific dynamic data service script debugging event output: errors.
executed-cmd
Syntax 
[no] executed-cmd
Context 
debug>dynsvc>scripts>event
debug>dynsvc>scripts>inst>event
debug>dynsvc>scripts>script>event
Description 
This command enables/disables the generation of a specific dynamic data service script debugging event output: executed-cmd.
state-change
Syntax 
[no] state-change
Context 
debug>dynsvc>scripts>event
debug>dynsvc>scripts>inst>event
debug>dynsvc>scripts>script>event
Description 
This command enables/disables the generation of a specific dynamic data service script debugging event output: state-change.
warnings
Syntax 
[no] warnings
Context 
debug>dynsvc>scripts>event
debug>dynsvc>scripts>inst>event
debug>dynsvc>scripts>script>event
Description 
This command enables/disables the generation of a specific dynamic data service script debugging event output: warnings.
instance
Syntax 
instance instance
Context 
debug>dynsvc>scripts
Description 
This command enables the context to configure dynamic services script debugging for a specific instance.
Parameters 
instance
Specifies the instance name.
script
Syntax 
script script
Context 
debug>dynsvc>scripts
Description 
This command enables the context to configure dynamic services script debugging for a specific script.
Parameters 
script
Specifies the script name.
 
Tools Commands
dynamic-services
Syntax 
dynamic-services
Context 
tools>perform>service
Description 
This command enables the context to execute dynamic services tools perform commands.
evaluate-script
Syntax 
evaluate-script sap sap-id control-session acct-session-id action script-action [dynsvc-policy name] [param-string string]
Context 
tools>perform>service>dynamic-services
Description 
This tools command performs the execution of a dynamic service script action as if the corresponding RADIUS attributes were received from RADIUS. It is possible to setup, modify or teardown a dynamic service associated with the specified control channel.
Parameters 
sap sap-id
specifies the dynamic service SAP id.
control-session acct-session-id
Specifies the accounting session id of the control channel associated with this dynamic service
action script-action
Specifies the requested action: setup, modify or teardown.
dynsvc-policy name
Specifies the dynamic services policy to use for this action. Mandatory parameter for setup and modify actions. In case of a modify action, the dynamic services policy must be the same as the policy used at setup.
param-string string
Specifies the dynamic service parameter list. Mandatory parameter for setup and modify actions.
dynamic-services
Syntax 
dynamic-services command-list
Context 
tools>dump>service
Description 
This command displays the list of supported commands that are allowed to be used in dynamic service CLI scripts.
There are two types of CLI nodes in this list:
•
Pass through nodes: navigation is allowed but attributes creation or attribute changes are prohibited in this node.
•
Allowed nodes: navigation, attribute creation and attribute changes are allowed in this node (available from 11.0R2 onward).