The no form of this command places the entity into an administratively enabled state.
The description command associates a text string with a configuration context to help identify the content in the configuration file.
The no form of this command removes the string from the configuration.
peer ip-address tag
sync-tag-name
[no
] startup-wait-time
[min
minutes] [sec
seconds]
The no form of the command disables the sending of forcerenew messages.
The no form of the command disables the Rapid Commit Option.
[no
] interface-id-mapping
[days days][
hrs hours] [
min minutes] [
sec seconds]
The no form of the command returns the value to the default.
The no form of the command returns the value to the default.
The no form of the command reverts to the default.
The no form of the command returns the value to the default.
[no
] retail-service
service-id
The no form of the removes the option from the configuration.
dns-server ipv6-address [ipv6-address...(up to 4 max)]
The no form of the command removes the name from the configuration.
The no form of the command removes the time from the configuration.
The no form of the command removes the time from the configuration.
lease-time [days
days] [hrs
hours] [min
minutes] [sec
seconds]
The no form of the command removes the lease time parameters from the configuration.
prefix ipv6-addr/prefix-len [failover
{local
| remote
}] [pd
] [wan-host
] [create
]
|
Values
|
local — A prefix designated as local is always used to renew the existing addresses/prefixes or to assign a new one. remote — A prefix designated as remote is used only to renew the existing DHCP leases. The new leases will be assigned from it only after the maximum-client-lead-time + partner-down-delay time elapses.
|
subnet {ip-address/mask|ip-address netmask} [create
]
no subnet {ip-address/mask|ip-address netmask}
[no
] address-range
start-ip-address end-ip-address [failover
{local
| remote
}]
The no form of the command means the subnet is active and new leases can be assigned from it.
[no
] exclude-addresses
start-ip-address [end-ip-address]
The no form of the command removes the address(es) from the configuration.
The no form of the command removes the address from the configuration.
subnet-binding key [sys-id-svc-id
| sys-id
| string
] unbind-delay
[hrs
hours] [min
mins] [sec
secs]
The command enables the pool to bind three selectable parameters, sys-id-svc-id,
sys-id, or a
string to a subnet. These parameters are retrieved from DHCP relay Option 82 vendor specific option (VSO). The intent of this feature is to allow multiple BNG to share a DHCP pool. When a subnet is bound to a VSO, only DHCP discoveries with matching VSO are allowed to allocate additional DHCP addresses. For example, if
sys-id is the chosen VSO, a DHCP discovery will bind the
sys-id to a subnet. Only DHCP discoveries with matching
sys-id are allowed to allocate additional addresses from the same subnet. If a DHCP discovery fails to match any bindings, and if a new subnet is still available, it will first bind the VSO to the new subnet and offer the subscriber an IP address.
|
Values
|
subnet — Addresses are only handed out for the subnet where the gi-address is part of pool — All subnets part of the pool which contain subnet where the gi-address is part of can hand out addresses.
|
|
Values
|
duid — Specifies the IPv6 DHCP unique identifier from DHCPv6. interface-id — Specifies the IPv6 interface-id option. interface-id-link-local — Specifies the interface-id and link-local address.
|
|
Values
|
subnet — Specifies that the prefix or address selection is limited to the prefix in the pool that covers the link address. pool — Specifies that all prefixes in the selected pool are eligible for assignment.
|
The no form of the command removes the server client type from the configuration.
DHCP snooping must be explicitly enabled (using the snoop command) at all points where DHCP messages requiring snooping enter the VPLS instance (both from the DHCP server and from the subscribers). Lease state information is extracted from snooped DHCP ACK messages to populate lease state table entries for the SAP.
The optional number-of-entries parameter defines the number lease state table entries allowed for this SAP or IP interface. If
number-of-entries is not specified, only a single entry is allowed. Once the maximum number of entries has been reached, subsequent lease state entries are not allowed. If lease state population is enabled and an entry cannot be retained in the table, the DHCP Relay or DHCP snoop function will prevent the far-end host from receiving the DHCP ACK message.
This command specifies the maximum number of DHCP or DHCP6 lease states allocated by the DHCP relay function, allowed on this interface.
The no form of the command disables dynamic host lease state management.
When the match-circuit-id command is enabled this part of the key is used to guarantee correctness in the lookup. This is only needed when are dealing with an IP aware DSLAM that proxies the client HW mac address.
The no form of this command returns the system to the default.
action {replace
| drop
| keep
}
The no form of this command returns the system to the default value.
When enabled, the router sends an ASCII-encoded tuple in the circuit-id sub-option of the DHCP packet. This ASCII-tuple consists of the access-node-identifier, service-id, and SAP-ID, separated by “|”.
In order to send a tuple in the circuit ID, the action replace command must be configured in the same context.
If disabled, the circuit-id sub-option of the DHCP packet will be left empty.
The no form of this command returns the system to the default.
circuit-id [ascii-tuple
| ifindex
| sap-id
| vlan-ascii-tuple
]
When enabled, the router sends an ASCII-encoded tuple in the circuit-id sub-option of the DHCP packet. This ASCII-tuple consists of the access-node-identifier, service-id, and SAP-ID, separated by “|”.
In order to send a tuple in the circuit ID, the action replace command must be configured in the same context.
If disabled, the circuit-id sub-option of the DHCP packet will be left empty.
The no form of this command returns the system to the default.
If disabled, the remote-id sub-option of the DHCP packet will be left empty.
The no form of this command returns the system to the default.
[no
] vendor-specific-option
The no form of the command disables the sending of the MAC address in the Alcatel-Lucent vendor specific sub-option of the DHCP relay packet.
The no form of the command disables the sending.
The no form of the command disables the sending of the SAP ID in the Alcatel-Lucent vendor specific sub-option of the DHCP relay packet.
The no form of the command disables the sending of the service ID in the Alcatel-Lucent vendor specific sub-option of the DHCP relay packet.
The no form of the command returns the default value.
The no form of this command reverts to the default setting. The local proxy server will not become operational without the emulated-server address being specified.
lease-time [days
days] [hrs
hours] [min
minutes] [sec
seconds] [override
]
The no form of this command disables the use of the lease-time command. The local-proxy-server will use the lease-time offered by either a RADIUS or DHCP server.
Supported only in the config>service>vpls>sap>dhcp>proxy-server context, specifies that the local-proxy-server will use the configured lease-time information to provide DHCP clients.
Use the no form of the command to disable DHCP snooping on the specified SAP or SDP binding.
The no form of the command disables the relaying of plain BOOTP packets.
server server1 [server2...(up to 8 max)]
The no form of the command disables the relaying of plain BOOTP packets.
The no form of the command disables the use of ARP to determine the destination heardware address
The no form of this command disables the relay.
action {replace
| drop
| keep
}
This command configures the processing required when the SR-Series receives a DHCP request that already has a Relay Agent Information Option (Option 82) field in the packet.
The no form of this command returns the system to the default value.
Per RFC 3046, DHCP Relay Agent Information Option , section 2.1.1,
Reforwarded DHCP requests, the default is to keep the existing information intact. The exception to this is if the giaddr of the received packet is the same as the ingress address on the router. In that case the packet is dropped and an error is logged.
When the match-circuit-id command is enabled this part of the key is used to guarantee correctness in our lookup. This is really only needed when dealing with an IP aware DSLAM that proxies the client hardware MAC address.
The no form of this command returns the system to the default.
[no
] vendor-specific-option
The no form of the command disables the sending of the MAC address in the Alcatel-Lucent vendor specific suboption of the DHCP relay packet.
The no form of the command disables the sending of the SAP ID in the Alcatel-Lucent vendor specific suboption of the DHCP relay packet.
The no form of the command disables the sending of the service ID in the Alcatel-Lucent vendor specific suboption of the DHCP relay packet.
The no form of the command returns the default value.
The no form of this command reverts to the default setting. The local proxy server will not become operational without a specified emulated server address.
lease-time [days
days] [hrs
hours] [min
minutes] [sec
seconds] [override
]
server server1 [server2...(up to 8 max)]
This command specifies a list of servers where requests will be forwarded. The list of servers can entered as either IP addresses or fully qualified domain names. There must be at least one server specified for DHCP relay to work. If there are multiple servers then the request is forwarded to all of the servers in the list. There can be a maximum of 8 DHCP servers configured.
The flood command is applicable only in the VPLS case. There is a scenario with VPLS where the VPLS node only wants to add Option 82 information to the DHCP request to provider per-subscriber information, but it does not do full DHCP relay. In this case, the server is set to "flood". This means the DHCP request is still a broadcast and is sent through the VPLS domain. A node running at L3 further upstream then can perform the full L3 DHCP relay function.
[no
] mac
ieee-mac-address
The no form of this command returns the MAC address of the IP interface to the default value.
Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or
aa-bb-cc-dd-ee-ff where
aa,
bb,
cc,
dd,
ee and
ff are hexadecimal numbers. Allowed values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
[no
] proxy-arp
policy-name [policy-name...(up to 5 max)]
[no
] subscriber-interface
ip-int-name
Use the no form of the command to remove the subscriber interface.
[no
] group-interface
ip-int-name
The no form of this command removes the policy name from the group interface configuration.
mask type dhcp-match-type {[prefix-string
prefix-string | prefix-length
prefix-length] [suffix-string
suffix-string | suffix-length
suffix-length]}
[no
] access-loop-encapsulation
acct-policy acct-policy-name [duplicate
acct-policy-name]
address pool
pool-name [secondary-pool
sec-pool-name] [delimiter
delimiter]
address use-pool-from-client
[delimiter
delimiter]
When the user-db is used for PPPoE authentication, the gi-address parameter cannot be used. A fixed IP address will then cause PPPoE to use this IP address. If no IP address is specified, the PPPoE will look for IP address by other means (DHCP). If a pool name is given, this pool will be sent in the DHCP request so that it can be used in by the DHCP server to determine which address to give to the host.
The no form of the command causes no IP address to be assigned to this host. In a user-db referred to from a local-dhcp-server, creating a host without address information will cause the matching client never to get an IP address.
The no form of the command removes the value from the configuration.
The no form of the command removes the values from the configuration.
|
Values
|
start-tag dot1q qtag1 qinq ( qtag1.qtag2 | qtag1.* | *.qtag2) atm (vpi/vci | vpi/* | */vci) qtag1 [0..4094] qtag2 [0..4094] vpi [0..4095] (NNI) [0..255] (UNI) vci [1..65535]
|
|
Values
|
end-tag dot1q qtag1 qinq ( qtag1.qtag2 | qtag1.* | *.qtag2) atm (vpi/vci | vpi/* | */vci) qtag1 [0..4094] qtag2 [0..4094] vpi [0..4095] (NNI) [0..255] (UNI) vci [1..65535]
|
This command specifies the Vendor-Identifying Vendor Option to match. Option 60 is encoded as Type-Length-Value (TLV). The hex-string portion of Option 60 in the received DHCP request is used for matching. Only the first 32 bytes can be defined here. If Option 60 from the message is longer, those bytes are ignored.
The no form of this command returns the system to the default.
This command specifies identification strings for the subscriber. This is useful when the server is centralized with Enhanced Subscriber Management (ESM) in a lower level in the network. These strings will be parsed by a downstream Python script or they can be used literally if the “strings-from-option” option in the config>subscriber-mgmt>sub-ident-policy context is set to this option number. In this case, the option number may be set to any allowed number (between 224 and 254 is suggested, as these are not dedicated to specific purposes). If the option number is not given, a default value of 254 is used. Note, for PPPoE only, if the local user database is attached to the PPPoE node under the group interface and not to a local DHCP server, the strings will be used internally so the option number is not used.
The no form of the command removes the IPv6 address from the host configuration.
The no form of the command removes the pool name from the configuration.
The no form of the command removes the static IPv6 SLAAC prefix (PIO) for the host from the configuration.
The no form of the command removes the IPv6 prefix and length of this host from the configuration.
The no form of the command removes the pool name from the configuration.
group tunnel-group-name [service-id
service-id]
mask type ppp-match-type {[prefix-string
prefix-string | prefix-length
prefix-length] [suffix-string
suffix-string | suffix-length
suffix-length]}
mask type dhcp-match-type {[prefix-string
prefix-string | prefix-length
prefix-length] [suffix-string
suffix-string | suffix-length
suffix-length]}
match-list dhcp-match-type-1 [dhcp-match-type-2...(up to 4 max)]
This command specifies the type of matching done to identify a host. There are different match-types for PPPoE hosts of which a maximum of 3 can be specified (4 for DHCP)
password {ignore
| chap
string |pap
string} [hash|hash2
]
This command specifies a password type or configures password string for pap or
chap. The pap and chap passwords are stored in a hashed format in the config files. The
hash|hash2 optional keywords are used for config execution.
The no form of the command removes the service ID from the configuration.
The no form of this command disables sending endpoint option in LCP negotiation.
The no form of this command set the per session load balancing.
The no form of this command limits the number of links in the bundle to 1.
The no form of this command also sets the time-out to 1000ms.
{{100 |
1000}
milliseconds}
[no
] short-sequence-numbers
lease-state [detail
] ipv6-address
ipv6-prefix[/prefix-length]
*A:Dut-C# show service id 202 dhcp6 lease-state
===============================================================================
DHCP lease state table, service 202
===============================================================================
IP Address Mac Address Sap/Sdp Id Remaining Lease MC
LifeTime Origin Stdby
-------------------------------------------------------------------------------
1::/120
1/1/6 30d33h12m DHCP
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
*A:Dut-C#
*A:Dut-C# show service id 202 dhcp6 lease-state detail
===============================================================================
DHCP lease states for service 202
===============================================================================
Service ID : 202
IP Address : 1::/120
Mac Address :
Interface : ip-11.3.202.3
SAP : 1/1/6
Remaining Lifetime : 30d33h12m
Persistence Key : N/A
Sub-Ident : ""
Sub-Profile-String : ""
SLA-Profile-String : ""
Lease ANCP-String : ""
Dhcp6 ClientId (DUID): 0101
Dhcp6 IAID : 1
Dhcp6 IAID Type : prefix
Dhcp6 Client Ip : FE80::200:FF:FE00:202
ServerLeaseStart : 09/01/2002 04:27:00
ServerLastRenew : 09/01/2002 04:27:00
ServerLeaseEnd : 10/01/2002 04:27:00
-------------------------------------------------------------------------------
Number of lease states : 1
===============================================================================
*A:Dut-C#
statistics [sap
sap-id] | [sdp
[sdp-id[:vc-id]] | interface
ip-int-name]]
A:ALA-A# show router 1000 dhcp statistics
===================================================================
DHCP Global Statistics (Service: 1000)
===================================================================
Rx Packets : 16000
Tx Packets : 15041
Rx Malformed Packets : 0
Rx Untrusted Packets : 0
Client Packets Discarded : 423
Client Packets Relayed : 0
Client Packets Snooped : 0
Client Packets Proxied (RADIUS) : 0
Client Packets Proxied (Lease-Split) : 0
Server Packets Discarded : 0
Server Packets Relayed : 0
Server Packets Snooped : 0
DHCP RELEASEs Spoofed : 0
DHCP FORCERENEWs Spoofed : 0
===================================================================
A:ALA-A#
A:ALA-48>show>router>dhcp# summary
===================================================================
===================================================================
Interface Name Arp Used/ Info Admin
Populate Provided Option State
-------------------------------------------------------------------
ccaiesif No 0/0 Keep Down
ccanet6 No 0/0 Keep Down
iesBundle No 0/0 Keep Up
spokeSDP-test No 0/0 Keep Down
test No 0/0 Keep Up
test1 No 0/0 Keep Up
test2 No 0/0 Keep Up
testA No 0/0 Keep Up
testB No 0/0 Keep Up
testIES No 0/0 Keep Up
to-web No 0/0 Keep Up
-------------------------------------------------------------------
Interfaces: 11
===================================================================
A:ALA-48>show>router>dhcp#
A:ALA-A# show router 1000 dhcp statistics
===================================================================
DHCP Global Statistics (Service: 1000)
===================================================================
Rx Packets : 16000
Tx Packets : 15041
Rx Malformed Packets : 0
Rx Untrusted Packets : 0
Client Packets Discarded : 423
Client Packets Relayed : 0
Client Packets Snooped : 0
Client Packets Proxied (RADIUS) : 0
Client Packets Proxied (Lease-Split) : 0
Server Packets Discarded : 0
Server Packets Relayed : 0
Server Packets Snooped : 0
DHCP RELEASEs Spoofed : 0
DHCP FORCERENEWs Spoofed : 0
===================================================================
A:ALA-A#
*A:Dut-C# show router dhcp6 summary
===============================================================================
DHCP6 Summary (Router: Base)
===============================================================================
Interface Name Nbr Used/Max Relay Admin Oper Relay
SapId Resol. Used/Max Server Admin Oper Server
-------------------------------------------------------------------------------
ip-1.1.1.10 No 0/0 Down Down
sap:1/1/5 0/8000 Down Down
ip-11.3.202.3 No 0/0 Down Down
sap:1/1/6 1/8000 Up Up
-------------------------------------------------------------------------------
Interfaces: 2
===============================================================================
*A:Dut-C#
*A:ALA-48>show>router>dhcp>local-dhcp-server# declined-addresses pool test
===============================================================================
Declined addresses for server test Base
===============================================================================
Pool Subnet IP Address
PPPoe User Name/ Time MAC Address Type
Option 82 Circuit ID
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
*A:ALA-48>show>router>dhcp>local-dhcp-server#
*A:SUB-Dut-A# show router dhcp local-dhcp-server dhcpS1 associations
===============================================================================
DHCP server s1 router 3
===============================================================================
Associations Admin
-------------------------------------------------------------------------------
tosim5 Up
===============================================================================
*A:SUB-Dut-A#
*A:ALA-48>show>router>dhcp>local-dhcp-server# declined-addresses pool test
===============================================================================
Declined addresses for server test Base
===============================================================================
Pool Subnet IP Address
PPPoe User Name/ Time MAC Address Type
Option 82 Circuit ID
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
*A:ALA-48>show>router>dhcp>local-dhcp-server#
*A:ALA-48>show>router>dhcp>local-dhcp-server# free-addresses pool test subnet 1.0.0.0/24
===============================================================================
Free addresses in subnet 1.0.0.0/24
===============================================================================
IP Address
-------------------------------------------------------------------------------
No. of free addresses: 0
===============================================================================
*A:ALA-48>show>router>dhcp>local-dhcp-server#
show router 600 dhcp6 local-dhcp-server "d6" interface-id-mapping
===============================================================================
Interface-ID Mappings for DHCPv6 server d6
===============================================================================
Mapped Prefix : 2001:AAAA::/64
Relay Interface ID : 1/1/10
LDRA Interface ID : (Not Specified)
Active Leases : 2001:AAAA::1 (stable)
===============================================================================
1 prefix found
===============================================================================
leases ip-address[/mask] address-from-user-db
[detail
]
leases ip-address[/mask] dhcp-host
dhcp-host-name [detail
]
leases ip-address[/mask] ppp-host
ppp-host-name [detail
]
leases ip-address[/mask] [detail
]
*A:ALA-48>show>router>dhcp>local-dhcp-server# leases ip-address 1.0.0.4
===============================================================================
Leases for DHCP server test router Base
===============================================================================
IP Address Lease State Mac Address Remaining Clnt
PPPoE user name/Opt82 Circuit Id LifeTime Type
-------------------------------------------------------------------------------
No leases found
*A:ALA-48>show>router>dhcp>local-dhcp-server#
leases [ipv6-address/prefix-length] [type] [state] [detail
]
show router 600 dhcp6 local-dhcp-server "d6" leases
===============================================================================
Leases for DHCPv6 server d6
===============================================================================
IP Address/Prefix Lease State Remaining Fail
Link-local Address LifeTime Ctrl
-------------------------------------------------------------------------------
2001:AAAA::1/128
FE80::220:FCFF:FE1E:CD52 stable 23h58m52s local
-------------------------------------------------------------------------------
1 leases found
===============================================================================
show router 500 dhcp local-dhcp-server "d4" pool-ext-stats "pool-1"
===============================================================================
Extended pool statistics for server "d4"
===============================================================================
Current Peak TimeStamp
-------------------------------------------------------------------------------
Pool pool-1
Local:
Stable Leases 0 0 01/07/2013 19:07:11
Provisioned Addresses 101
Used Addresses 0 0 01/07/2013 19:07:11
Free Addresses 101 101 01/07/2013 19:07:11
Used Pct 0 0 01/07/2013 19:07:11
Free Pct 100 100 01/07/2013 19:07:11
Last Reset Time 01/07/2013 19:07:11
-------------------------------------------------------------------------------
Number of entries 1
===============================================================================
show router 500 dhcp6 local-dhcp-server "d6" pool-ext-stats "pool-v6"
===============================================================================
Extended pool statistics for server "d6"
===============================================================================
Current Peak TimeStamp
-------------------------------------------------------------------------------
Pool pool-v6
Local:
Stable Leases 0 0 01/07/2013 19:54:52
Provisioned Blks 4
Used Blks 0 0 01/07/2013 19:54:52
Free Blks 4 4 01/07/2013 19:54:52
Used Pct 0 0 01/07/2013 19:54:52
Free Pct 100 100 01/07/2013 19:54:52
Last Reset Time 01/07/2013 19:54:52
-------------------------------------------------------------------------------
Number of entries 1
===============================================================================
show router 500 dhcp6 local-dhcp-server "d6" prefix-ext-stats 2001:ABCD::/62
===============================================================================
Extended statistics for prefix 2001:ABCD::/62
===============================================================================
Current Peak TimeStamp
-------------------------------------------------------------------------------
Local:
Failover Oper State Active
Stable Leases 0 0 01/07/2013 19:54:52
Provisioned Blks 4
Used Blks 0 0 01/07/2013 19:54:52
Free Blks 4 4 01/07/2013 19:54:52
Used Pct 0 0 01/07/2013 19:54:52
Free Pct 100 100 01/07/2013 19:54:52
Last Reset Time 01/07/2013 19:54:52
-------------------------------------------------------------------------------
Number of entries 1
===============================================================================
show router 500 dhcp local-dhcp-server "d4" subnet-ext-stats 220.10.10.0/24
===============================================================================
Extended statistics for subnet 220.10.10.0/24
===============================================================================
Current Peak TimeStamp
-------------------------------------------------------------------------------
Local:
Stable Leases 1 1 01/07/2013 19:38:36
Provisioned Addresses 101
Used Addresses 1 1 01/07/2013 19:38:36
Free Addresses 100 100 01/07/2013 19:38:36
Used Pct 1 1 01/07/2013 19:38:36
Free Pct 99 99 01/07/2013 19:38:36
Last Reset Time 01/07/2013 19:07:11
-------------------------------------------------------------------------------
Number of entries 1
===============================================================================
*A:SUB-Dut-A# show router dhcp local-dhcp-server dhcpS1 server-stats
==============================================================================
Statistics for DHCP Server dhcpS1 router Base
==============================================================================
Rx Discover Packets : 0
Rx Request Packets : 0
Rx Release Packets : 0
Rx Decline Packets : 0
Rx Inform Packets : 0
Tx Offer Packets : 0
Tx Ack Packets : 0
Tx Nak Packets : 0
Tx Forcerenew Packets : 0
Client Ignored Offers : 0
Leases Timed Out : 0
Dropped Bad Packet : 0
Dropped Invalid Type : 0
Dropped No User Database : 0
Dropped Unknown Host : 0
Dropped User Not Allowed : 0
Dropped Lease Not Ready : 0
Dropped Lease Not Found : 0
Dropped Not Serving Pool : 0
Dropped Invalid User : 0
Dropped Overload : 0
Dropped Persistence Overload : 0
Dropped Generic Error : 0
Dropped Destined To Other : 0
Dropped Address Unavailable : 0
Dropped Max Leases Reached : 0
Dropped Server Shutdown : 0
Dropped No Subnet For Fixed IP: 0
==============================================================================
*A:SUB-Dut-A#
*A:SUB-Dut-A# show router dhcp local-dhcp-server dhcpS2 subnet-stats pool POOL2
===============================================================================
Statistics for pool POOL2
===============================================================================
Subnet Free Offered Stable
FRPending RemPending Declined
-------------------------------------------------------------------------------
2.0.0.0/8 16384 0 0
0 0 0
-------------------------------------------------------------------------------
No. of entries: 1
===============================================================================
*A:SUB-Dut-A#
*A:SUB-Dut-A# show router dhcp local-dhcp-server dhcpS2 summary
===============================================================================
DHCP server dhcpS2 router Base
===============================================================================
dhcpS2-POOL2
Admin State : inService
Persistency State : ok
User Data Base : N/A
Use gateway IP address : disabled
Send force-renewals : disabled
-------------------------------------------------------------------------------
Pool name : POOL2
-------------------------------------------------------------------------------
Subnet Free Stable Declined Offered Remove-pending
-------------------------------------------------------------------------------
2.0.0.0/8 16384 0 0 0 0
Totals for pool 16384 0 0 0 0
-------------------------------------------------------------------------------
Totals for server 16384 0 0 0 0
-------------------------------------------------------------------------------
Associations Admin
-------------------------------------------------------------------------------
No associations found
===============================================================================
*A:SUB-Dut-A#
*A:ALA-49>show>router>dhcp# servers
=================================================================
Overview of DHCP Servers
=================================================================
Active Leases: 0
Maximum Leases: 159744
Router Server Admin State
-----------------------------------------------------------------
Router: Base base_router_dhcp_server outOfService
Service: 3 s1 inService
=================================================================
*A:ALA-49>show>router>dhcp#
*A:ALA-48>show>router>dhcp>local-dhcp-server>statistics# servers
==============================================================================
Statistics for DHCP Server test router Base
==============================================================================
Rx Discover Packets : 0
Rx Request Packets : 0
Rx Release Packets : 0
Rx Decline Packets : 0
Rx Inform Packets : 0
Tx Offer Packets : 0
Tx Ack Packets : 0
Tx Nack Packets : 0
Tx Forcerenew Packets : 0
Client ignored offers : 0
Dropped Bad Packet : 0
Dropped Invalid Type : 0
Dropped Unknown Host : 0
Dropped User Not Allowed: 0
Dropped Lease Not Ready : 0
Dropped Lease Not Found : 0
Dropped Not Serving Pool: 0
Dropped Invalid User : 0
Dropped Generic Error : 0
==============================================================================
*A:ALA-48>show>router>dhcp>local-dhcp-server>statistics#
*A:ALA-48>show>router>dhcp>local-dhcp-server>statistics# subnet pool test
===============================================================================
Statistics for pool test
===============================================================================
Subnet Free Offered Stable
FRPending RemPending Declined
-------------------------------------------------------------------------------
1.0.0.0/24 0 0 0
0 0 0
-------------------------------------------------------------------------------
No. of entries: 1
===============================================================================
*A:ALA-48>show>router>dhcp>local-dhcp-server>statistics#
lease-state [[sap
sap-id] | [sdp
dp-id:vc-id ] | [interface
interface-name] | [ip-address
ip-address[/mask]>] | [mac
ieee-address]] [detail
]
*A:SUB-Dut-A# show router dhcp servers
=================================================================
Overview of DHCP Servers
=================================================================
Active Leases: 0
Maximum Leases: 159744
Router Server Admin State
-----------------------------------------------------------------
Router: Base dhcpS1 inService
Router: Base dhcpS10 inService
Router: Base dhcpS100 inService
Router: Base dhcpS101 inService
Router: Base dhcpS102 inService
Router: Base dhcpS103 inService
Router: Base dhcpS104 inService
Router: Base dhcpS105 inService
Router: Base dhcpS106 inService
Router: Base dhcpS107 inService
Router: Base dhcpS108 inService
Router: Base dhcpS109 inService
Router: Base dhcpS11 inService
Router: Base dhcpS110 inService
Router: Base dhcpS111 inService
Router: Base dhcpS112 inService
Router: Base dhcpS113 inService
Router: Base dhcpS114 inService
Router: Base dhcpS115 inService
Router: Base dhcpS116 inService
Router: Base dhcpS117 inService
Router: Base dhcpS118 inService
Router: Base dhcpS119 inService
...
Service: 1022 dhcpS1022 inService
Service: 1023 dhcpS1023 inService
Service: 1024 dhcpS1024 inService
=================================================================
*A:SUB-Dut-A#
*A:SUB-Dut-A#
=================================================================
Overview of DHCP Servers
=================================================================
Active Leases: 0
Maximum Leases: 159744
Router Server Admin State
-----------------------------------------------------------------
Router: Base base_router_dhcp_server outOfService
Service: 3 s1 inService
=================================================================
|
•
|
When sap is taken, all leases associated with the SAP are re-written.
|
|
•
|
When using the old-mac option, providing a new MAC ieee-address is mandatory.
|
lease-state [port
port-id] [inter-dest-id
intermediate-destination-id] [no-dhcp-release
]
lease-state [port
port-id] no-inter-dest-id
[no-dhcp-release
]
Clears the DHCP IP address lease state information. The ip-address portion of the
address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IP addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
leases ip-address[/mask] [offered
]
lease-state [ip-address
ipv6-address/prefix-length] [mac
ieee-address]
Clears the DHCP6 IP address lease state information. The ipv6-address portion of the
address command specifies the IP host address that will be used by the IP interface within the subnet. This address must be unique within the subnet and specified in dotted decimal notation. Allowed values are IPv6 addresses in the range 1.0.0.0 – 223.255.255.255 (with support of /31 subnets).
statistics [sap
sap-id | sdp
[sdp-id[:vc-id] | interface
ip-int-name | ip-address]
leases [ipv6-address/prefix-length] [type] [state]
This command reset the begin time of peak values in output of the show router rt-id dhcp6 local-dhcp-server svr-name pool-ext-stats command.
This command reset the begin time of peak values in output of the show router rt-id dhcp6 local-dhcp-server svr-name prefix-ext-stats command/
This command enables DHCP debugging.
The no form of the command disables debugging.
The no form of the command disables debugging
[no
] local-dhcp-server
server-name [lease-address
ip-address]
[no
] local-dhcp-server
server-name [mac
ieee-address]
mode {dropped-only
| ingr-and-dropped
| egr-ingr-and-dropped
}
edit-ppp-session sap
sap-id ip
ip-address [subscriber
sub-ident-string] [sub-profile-string
sub-profile-string] [sla-profile-string
sla-profile-string] [inter-dest-id
intermediate-destination-id] [ancp-string
ancp-string] [app-profile-string
app-profile-string]
edit-ppp-session svc-id
service-id ip
ip-address [subscriber
sub-ident-string] [sub-profile-string
sub-profile-string] [sla-profile-string
sla-profile-string] [app-profile-string
app-profile-string] [inter-dest-id
intermediate-destination-id] [ancp-string
ancp-string]
eval-lease-state [svc-id
service-id] [sap
sap-id] [subscriber
sub-ident-string] [ip
ip-address]
host-lookup [mac
ieee-address] [remote-id
remote-id] [sap-id
sap-id] [service-id
service-id] [string
vso-string] [system-id
system-id] [option60
hex-string] [circuit-id
circuit-id | circuit-id-hex
circuit-id-hex]
authentication password password [mac
ieee-address] [remote-id
remote-id] [circuit-id
circuit-id] user-name
user-name [service-name
service-name]
authentication password password [mac
ieee-address] [remote-id
remote-id] [circuit-id-hex
circuit-id-hex] user-name
user-name [service-name
service-name]
host-lookup [mac
ieee-address] [remote-id
remote-id] [user-name
user-name] [service-name
service-name] [circuit-id
circuit-id | circuit-id-hex
circuit-id-hex]
