Mirror Service Command Reference

Command Hierarchies

•	Mirror Configuration Commands

•	Lawful Intercept Commands

•	Debug Commands

•	Show Commands

 

 

Mirror Configuration Commands

config

—

mirror

—	mirror-dest service-id [type mirror-type] [create]

—	no mirror-dest service-id

—	description description-string

—	no description

—	[no] enable-port-id

—

encap

—	layer-3-encap {ip-udp-shim | ip-gre} [create]

—	no layer-3-encap

—	direction-bit

—	no direction-bit

—	router {router-instance | service-name service-name}

—

no router

—	gateway [create]

—	no gateway

—	ip src ip-address dest ip-address

—

no ip

—	udp src udp-port dest udp-port

—

no udp

—	endpoint endpoint-name [create]

—	no endpoint endpoint-name

—	description description-string

—	no description

—	revert-time {revert-time | infinite}

—	no revert-time

—	fc fc-name

—

no fc

—	isa-aa-group aa-group-id traffic-direction

—	[no] remote-source

—	far-end ip-address [ing-svc-label ing-vc-label | tldp]

—	no far-end ip-address

—	sap sap-id [create] [no-endpoint]

—	sap sap-id [create] endpoint name

—

no sap

—

cem

—	packet jitter-buffer milliseconds [payload-size bytes]

—	packet payload-size bytes

—

no packet

—	[no] rtp-header

—

egress

—

ip-mirror

—	sa-mac ieee-address da-mac ieee-address

—

no sa-mac

—	qos policy-id

—

no qos

—	service-name service-name

—	no service-name

—	[no] shutdown

—	slice-size bytes

—	no slice-size

—	spoke-sdp sdp-id:vc-id [create] [no-endpoint]

—	spoke-sdp sdp-id:vc-id [create] endpoint name [icb]

—	no spoke-sdp sdp-id:vc-id

—

egress

—	vc-label egress-vc-label

—	no vc-label [egress-vc-label]

—	precedence precedence-value | primary

—	no precedence

—	[no] shutdown

—	[no] shutdown

 

 

Debug Commands

debug

—	[no] mirror-source service-id

—	ingress-label label [label …up to 8 max]

—	no ingress-label [label [label …up to 8 max]]

—	ip-filter ip-filter-id entry entry-id [entry-id …]

—	no ip-filter ip-filter-id [entry entry-id] [entry-id …]

—	mac-filter mac-filter-id entry entry-id [entry-id …]

—	no mac-filter mac-filter-id [entry entry-id...]

—	port {port-id | lag lag-id} {[egress] [ingress]}

—	no port {port-id | lag lag-id} [egress] [ingress]

—	sap sap-id {[egress] [ingress]}

—	no sap sap-id [egress] [ingress]

—	subscriber sub-ident-string [sap sap-id [ip ip-address] [mac ieee-address] |sla-profile sla-profile-name] [fc {[be] [l2] [af] [l1] [h2] [ef] [h1] [nc]}] {[ingress] [egress]}

—	no subscriber sub-ident-string

—	[no] shutdown

 

 

Lawful Intercept Commands

config

—

li

—

li-filter

—	li-mac-filter filter-name [create]

—	no li-mac-filter

—	description description-string

—	no description

—	entry li-entry-id

—

no entry

—	description description-string

—	no description

—	match [frame-type {802dot3|802dot2-llc|802dot2-snap|ethernet_II}]

—

no match

—	dst-mac ieee-address [mask]

—	no dst-mac

—	src-macieee-address [mask]

—	no src-mac

—	li-filter-associations

—	li-mac-filter li-mac-filter-name

—	mac-filter mac-filter-id

—	li-filter-block-reservation

—	[no] li-reserved-block block-name [create]

—	[no] start-entry entry-id count count

—	[no] mac-filter filter-id

—	[no] li-filter-lock-state {locked | unlocked-for-li-users | unlocked-for-all-users}

—	li-source service-id

—	ip-filter ip-filter-id [entry entry-id...] [intercept-id id] [session-id id]

—	no ip-filter ip-filter-id

—	ipv6-filter ipv6-filter-id [entry entry-id...] [intercept-id intercept-id...] [session-id session-id...]

—	no ipv6-filter ipv6-filter-id

—	mac-filter mac-filter-id entry entry-id [entry-id...] [intercept-id id] [session-id id]

—	no mac-filter mac-filter-id

—

nat

—	[no] classic-lsn-sub router router-instance ip ip-address

—	intercept-id id

—	no intercept-id

—	session-id id

—	no session-id

—	[no] dslite-lsn-sub router router-instance b4 ipv6-prefix

—	intercept-id id

—	no intercept-id

—	session-id id

—	no session-id

—	ethernet-header [da ieee-address] [sa ieee-address] [etype ethertype]

—	no ethernet-header

—	[no] l2-aware-sub sub-ident-string

—	intercept-id id

—	no intercept-id

—	session-id id

—	no session-id

—	[no] nat64-lsn-sub router router-instance ip ipv6-prefix

—	intercept-id id

—	no intercept-id

—	session-id id

—	no session-id

—	sap sap-id {[ingress] [egress]} [intercept-id id] [session-id id]

—	no sap sap-id

—	[no] shutdown

—	subscriber sub-ident-string [sap sap-id [ip ip-address] [mac ieee-address] |sla-profile sla-profile-name] [fc {[be] [l2] [af] [l1] [h2] [ef] [h1] [nc]}] {[ingress] [egress]} [intercept-id id] [session-id id]

—	no subscriber sub-ident-string

—

log

—	[no] log-id log-id

—	description description-string

—	no description

—	filter filter-id

—

no filter

—	from {[li]}

—

no from

—	[no] shutdown

—	time-format {local | utc}

—	to memory [size]

—	to session

—	to snmp [size]

—	mobility-gateway

—	df-peer df-peer-id df2-addr ip-address df2-port port df3-addr ip-address df3-port port

—	no df-peer df-peer-id

—	local-interface ip-address [router router-instance]

—	no local-interface

—	operator op-id

—	no operator

—	target target-type id string intercept intercept peer df-peer-id [liid li-identifier]

—	no target target-type id string

—	x3-transport {tcp | udp} ulic-header {v0 | v1}

—

save

 

The following commands are also described in the Basic System Configuration Guide.

 

config

—

bof

—	[no] li-local-save

—	[no] li-separate

 

The following commands are also described in the System Management Guide.

config

—

system

—

security

—

user

—	[no] access [ftp] [snmp] [console] [li]

—	[no] profile user-profile-name

—

[no] li

 

Show Commands

show

—	debug [application]

—	mirror [service-id]

—

li

—	li-source [service-id]

—

log

—	log-id [log-id] [severity severity-level] [application application] [sequence from-seq [to-seq]] [count count] [router router-instance [expression]] [subject subject [regexp]] [ascending | descending]

—	mobile-gateway [target target-type id target-id] [df-peer peer-id] [summary]

—

status

—

service

—	active-subscribers summary

—	active-subscribers [subscriber sub-ident-string [sap sap-id sla-profile sla-profile-name]] [detail|mirror]

—	active-subscribers hierarchy [subscriber sub-ident-string]

—	service-using mirror