For feedback and comments: |
documentation.feedback@alcatel-lucent.com |
![]() |
![]() |
![]() |
![]() |
—
—
—
—
— lag lag-id lag-id
— ldp-treetrace {prefix ip-prefix/mask| manual-prefix ip-prefix/mask}[path-destination ip-address] [trace-tree]
— map-to-phy-port {ccag ccag-id | lag lag-id | eth-tunnel tunnel-index}{ isid isid [end-isid isid] | service service-id | svc-name [end-service service-id | svc-name]} [summary]
—
—
—
—
— resources mda mda-id
— sessions [nat-group nat-group-id] [mda mda-id] [protocol {gre|icmp| tcp|udp}] [inside-ip ip-address] [inside-router router-instance] [inside-port port-number] [outside-ip ipv4-address] [outside-port port-number] [foreign-ip ipv4-address] [foreign-port port-number] [dslite-address ipv6-address] [wlan-gw-ue ieee-address] [next-index index] [upnp]
—
—
— port port id
—
—
—
— ppp port-id
— mc-endpoint peer ip-address
—
—
—
— sync-database [peer ip-address] [port port-id | lag-id] [sync-tag sync-tag] [application application] [detail] [type type]
— router router-instance
—
—
—
—
—
— fec prefix ip-address[/mask]
—
—
—
—
— peer ip-address
—
—
—
—
— ftn [endpoint endpoint | sender sender | nexthop nexthop | lsp-id lsp-id | tunnel-id tunnel-id | label start-label end-label]
— ilm [endpoint endpoint | sender sender | nexthop nexthop | lsp-id lsp-id | tunnel-id tunnel-id | label start-label end-label]
—
— te-lspinfo [endpoint ip-address] [sender ip-address] [lspid lsp-id] [detail] [p2p | p2p-tid tunnel-id]
— te-lspinfo [endpoint ip-address] [sender ip-address] [lspid lsp-id] [detail] [p2p | p2p-tid tunnel-id]{ [phops] [nhops] [s2l ip-address] } }
—
—
—
—
—
—
—
— bad-packet interface-name
—
—
—
—
—
—
—
—
—
—
—
—
—
— static-route ldp-sync-status
—
—
—
—
—
—
— l2pt-diags clear
— l2pt-diags detail
— mc-endpoint mc-ep-id
—
—
—
— system-resources slot-number
—
—
—
—
—
— lockout aps-id
—
—
—
—
—
—
—
—
—
—
— clear-force all-mc
—
— clear-force peer-mc ip-address
—
—
—
—
—
—
—
— sync-database-reconcile [peer ip-address] [port port-id|lag-id [sync-tag sync-tag]] [application application]
—
—
—
—
—
— group tunnel-group-name
—
— tunnel tunnel-name
—
—
—
— sessions stop connection-id
— tunnel connection-id
—
—
—
— cspf to ip-addr [from ip-addr] [bandwidth bandwidth] [include-bitmap bitmap] [exclude-bitmap bitmap] [hop-limit limit] [exclude-address excl-addr [excl-addr...(up to 8 max)]] [use-te-metric] [strict-srlg] [srlg-group grp-id...(up to 8 max)] [exclude-node excl-node-id [excl-node-id ..(up to 8 max)]] [skip-interface interface-name] [ds-class-type class-type] [cspf-reqtype req-type] [least-fill-min-thd thd] [setup-priority val] [hold-priority val]
—
—
— trap-suppress number-of-traps time-interval
—
—
—
—
—
—
— run-manual-spf externals-only
—
—
— run-manual-spf externals-only
—
— authentication-server-check server-address ip-address [port port] { {user-name DHCP client user name password password } | attr-from-file file-url } secret key [source-address ip-address] [timeout seconds] [router router-instance | service-name service-name]
—
— egress-multicast-group group-name
—
— id service-id
— endpoint endpoint-name
— force-switchover sdp-id:vc-id
— force-switchover spoke-sdp-fec [1..4294967295]
—
—
—
—
—
— edit-lease-state sap sap-id ip ip-address [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string]
— edit-lease-state svc-id service-id ip ip-address [subscriber sub-ident-string] [sub-profile-string sub-profile-string] [sla-profile-string sla-profile-string]
—
—
— forcerenew {interface interface-name | sap sap-id|sdp sdp-id:vc-id} [ip ip-address[/mask] |mac ieee-address]
—
—
—