The description command associates a text string with a configuration context to help identify the context in the configuration file.
The no form of this command removes any description string from the context.
The shutdown command administratively disables the entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistics. Many entities must be explicitly enabled using the
no shutdown command.
The shutdown command administratively disables an entity. The operational state of the entity is disabled as well as the operational state of any entities contained within. Many objects must be shut down before they can be deleted.
The no form of this command removes the card from the configuration. All associated ports, services, and MDAs must be shutdown
This mandatory command adds an IOMto the device configuration for the slot. The card type can be preprovisioned, meaning that the card does not need to be installed in the chassis.
The no form of this command removes the card from the configuration
The no form of this command deletes the MDA from the configuration. The MDA must be administratively shut down before it can be deleted from the configuration.
7450: m60-10/100eth-tx, m10-1gb-sfp, m16-oc12/3-sfp, m8-oc12/3-sfp, m16-oc3-sfp, m4-oc48-sfp, m1-10gb, m2-oc48-sfp, m20-100eth-sfp, m20-1gb-tx, m2-10gb-xfp, m20-1gb-sfp, m1-10gb-xfp, vsm-cca, m5-1gb-sfp-b, m10-1gb-sfp-b, m10-1gb+1-10gb, m10-1gb-hs-sfp, m1-10gb-hs-xfp, m4-10gb-xp-xfp, m2-10gb-xp-xfp, m1-10gb-xp-xfp, m10-1gb-xp-sfp, m20-1gb-xp-sfp, m20-1gb-xp-tx, isa-ms
The no form of the command disables the server.
The no form of the command disables the analyzer for the group.
The no form of the command disables the FCC server.
The no form of the command disables the server.
The no form of the command disables stream-selection for the group.
The no form of the command removes an explicit multicast information policy from the service or routing context and restores the default multicast information policy.
Each multicast information policy contains a bundle named default. The default bundle cannot be deleted. Any multicast channel that fails to match a channel range within an explicit bundle is automatically associated with the default bundle.
The no form of the command removes a bundle from the multicast information policy. The default bundle cannot be removed from the policy.
The no form of the command removes the specified multicast channel from the containing bundle.
The no form of the command removes the specifed sender override context from the channel range.
The no form of the command deletes the video interface policy context.
The no form of the command returns the parameter to the default value.
The no form of the command returns the parameter to the default value.
The mode indicates how the FCC server will send information to the client. When burst is specified, the FCC server will send the channel at a nominally faster rate than the channel was received based on the applicable fcc-burst setting. When
dent is specified, the FCC server will selectively discard frames from the original stream based on the applicable dent-threshold setting. If no mode is specified, burst is the default mode.
The no form of the command disables the FCC server at that context and subordinate contexts.
The no form of the command disables the retransmission server.
The no form of the command returns the parameter to the default value.
The no form of the command returns the parameter to the default value.
The no form of the command disables enforcement of an egress bandwidth limit.
The no form of the command reverts to the default value.
The no form of the command disables removes the FCC configuration for the bundle/channelcontext and implies the setting is inherited from a higher context or the default policy.
The local-fcc-port port value is the only configuration parameter in the bundle “default” context.
The no form of the command removes the port from the video configuration.
The local-rt-port port value is the only configuration parameter in the bundle “default” context.
The no form of the command removes the port from the video configuration.
The no form of the command returns the parameter to the default value where the RET server is disabled on the video group.
The no form of the command removes the time value from the configuration.
The no form of the command returns the parameter to the default value.
The no form of the command removes the upstream
retransmission server configuration and implies the configuration is inherited from a higher context or from the default policy.
The source-port port-num value is the only configuration parameter in the bundle “default” context.
The no form of the command removes the value from the configuration.
The video interface must be associated with an ISA group using the video-sap command and have IP addresses for it to be functional.
The no form of the command deletes the IP address/subnet from the video interface.
This command assigns an existing CPU protection policy to the associated service video interface. The CPU protection policies are configured in the config>sys>security>cpu-protection>policy cpu-protection-policy-id context. The number of RTCP messages per client will be limited to the number as configured under the policy.
The no form of the command removes the address from the ad server configuration.
The no form of the command removes the multicast service association.
The no form of the command deletes the RT client address from the video interface.
The no form of the command removes the video group association.
The no form of the command removes the QoS policy association from the video interface, and the QoS policy reverts to the default.
The no form of this command removes any configured filter ID association with the SAP. The filter ID itself is not removed from the system.
The no form of the command deletes the gateway IP address from the VPLS video interface.
