For feedback and comments:
documentation.feedback@alcatel-lucent.com

Table of Contents Previous Next PDF


 
 
 
 
 
Show Commands
debug
Syntax
debug [application]
Context
show
Description
This command displays the debug points that have been set.
Parameters
application
Specifies the application debug points that have been set.
Values
application-assurance-group
Syntax
application-assurance-group [aa-group-id [load-balance [unassigned]]]
Context
show>isa
Description
This command displays ISA group information.
Parameters
aa-group-id
Specifies the AA ISA group ID.
load-balance
Specifies load balancing information.
unassigned
Specifies load balancing unassigned aa-sub information.
Output
Show Command Output
The following table describes the show command output fields:
 
Indicates whether partitions are enabled or disabled within an ISA-AA group. When the value of this object is set to enabled, partitions can be created in the tmnxBsxAaGrpPartTable.
Egress from subscriber
Egress to subscriber
Sample Output
A:ALU>show>isa# application-assurance-group 1 
===============================================================================
ISA Application-assurance-groups
===============================================================================
ISA-AA Group Index   : 1                                                       
Description          : Test
Primary ISA-AA       : 2/1 up/active                          (7 subs, 9 saps) 
                     : 3/2 up/active                          (6 subs, 8 saps) 
Backup ISA-AA        : 1/1 up/standby                                          
Last Active change   : 01/30/2009 20:14:37                                     
Admin State          : Up                                                      
Oper State           : Up                                                      
Diverted FCs         : be l2                                                   
Fail to mode         : fail-to-wire 									Partitions	: disabled
QoS
  Egress from subscriber
    Pool             : default                                                 
      Reserved Cbs   : 50 percent
                                             
      Slope Policy   : aa_spol1                                                
    Queue Policy     : aa_nqpolEgr                                             
    Scheduler Policy : aa_pspFrmSub                                            
  Egress to subscriber                
    Pool             : default                                                 
      Reserved Cbs   : 50 percent
                                             
      Slope Policy   : aa_spol1                                                
    Queue Policy     : aa_nqpolEgr                                             
    Scheduler Policy : aa_pspToSub 
===============================================================================
A:ALU>show>isa#
 
 
A:ALA-IPD# show isa application-assurance-group <aa-group-id> load-balance
===============================================================================
ISA Application-assurance-group <aa-group-id>
===============================================================================
load-balance status         : Complete | Balancing
isa-capacity-cost-threshold : low  40,000
                              high 50,000
-------------------------------------------------------------------------------
                 capacity-cost  aa-sub      aa-sub stats spoke-sdp transit-ip
                                count       count         entries     entries     
-------------------------------------------------------------------------------
 1/1             6              6           60            0        0         
 3/1             5              5           48            0        0         
 Mda Limit       NA             1024        32768         1024     1024 
===============================================================================
aa-sub type count for group 2
===============================================================================
                 all         esm         sap         spoke-sdp   transit
-------------------------------------------------------------------------------
 1/1             6           3           3           0             0         
 3/1             5           3           2           0             0         
 Unassigned      0           0           0           0             0
...
===============================================================================
A:ALA-IPD# 
 
 
*A:Dut-C# show isa application-assurance-group 84 load-balance unassigned
===============================================================================
ISA Application-assurance-group 84 unassigned
===============================================================================
type      SvcId      aa-sub                        App-Profile
-------------------------------------------------------------------------------
esm       2          Sub1                          Cost30
esm       50         Sub2                          Cost31
sap       29         2/1/10:527                    Cost29
sap       30         2/1/10:528                    Cost29
sap       31         2/1/10:529                    Cost29
sap       31         2/1/10:530                    Cost29
sap       31         2/1/10:531                    Cost29
sap       32         2/1/10:546                    Cost29
sap       32         2/1/10:547                    Cost29
sap       33         2/1/10:548                    Cost29
spoke     201        199:10                        Cost27
spoke     202        199:17                        Cost10
spoke     202        199:18                        Cost10
spoke     202        199:19                        Cost10
===============================================================================
*A:Dut-C#
aarp
Syntax
aarp
aarp aarpId [detail]
Context
show>app-assur
Description
This command displays Application Assurance Redundancy Protocol (AARP) instance status
Parameters
aarpId
Specifies an integer that identifies an AARP instance
Values
detail
Displays detailed information.
group
Syntax
group aa-group-id [:partition-id]
Context
show>app-assure
Description
This command enables the context to display application-assurance group information.
Parameters
aa-group-id
Specifies an AA ISA group ID.
Values
partition-id
Specifies a partition within a group.
Values
aa-interface
Syntax
aa-interface isa mda-id
Context
show>app-assure>group
Description
This command displays AA interface information.
Parameters
mda-id
Specifies the MDA ID.
Values
aa-sub
Syntax
aa-sub esm sub-ident-string [snapshot]
aa-sub sap sap-id
aa-sub spoke-id sdp-id:vc-id [snapshot]
aa-sub transit transit-aasub-name [snapshot]
Context
show>app-assure>group
Description
This command displays per-subscriber statistics.
Parameters
esm sub-ident-string
Specifies an existing subscriber identification string.
sap sap-id
Specifies the physical port identifier portion of the SAP definition. Refer to Appendix A: Common CLI Command Descriptions for syntax.
spoke-id sdp-id:vc-id
Specifies the spoke SDP ID and VC ID.
Values
snapshot
Specifies that the statistics retrieved include the sum of the statistics from the previous collection windows, and the statistics for any closed flows since the last collection window.
transit transit-aasub-name
Specifies an existing transit subscriber name string up to 32 characters in length.
Sample Output
*A:Dut-C# show application-assurance group 1 aa-sub spoke-sdp 1:1 snapshot application count 
===============================================================================
Application-Assurance Subscriber 1:1 (spoke-sdp)
Application Statistics (snapshot)
===============================================================================
Application                      Disc Octets          Packets       Flows
-------------------------------------------------------------------------------
Unknown                            0% 0               0             0
===============================================================================
*A:Dut-C# 
 
 
A:ALA-IPD# show application-assurance group 1 aa-sub {esm <sub-ident-string> | 
sap <sap-id> | spoke-sdp <sdp-id:vc-id> | transit <transit-aasub-name>} summary
===============================================================================
Application-Assurance Subscriber summary (realtime | snapshot)
==============================================================================
AA-Subscriber       : 1:1 (spoke-sdp)
ISA assigned        : 3/1
App-Profile         : app_prof_D_4
App-Profile divert  : Yes
Capacity cost       : 1
-------------------------------------------------------------------------------
Traffic                   Octets            Packets         Flows	
-------------------------------------------------------------------------------
Admitted from subscriber: 0                 0               0
Denied from subscriber:   0                 0               0
Active flows from subscriber:                               0
Admitted to subscriber:   0                 0               0
Denied to subscriber:     0                 0               0
Active flows to subscriber:                                 0
Total flow duration:      0 seconds
Terminated flows:                                           0
Short Duration flows:                                       0
Medium Duration flows:                                      0
Long Duration flows:                                        0
 
Top App-Groups            Octets            Packets         Flows
-------------------------------------------------------------------------------
<app-group-name>          100000            3000            30
<app-group-name>          90000             3000            30
<app-group-name>          80000             3000            30
===============================================================================
A:ALA-IPD# 
 
A:ALA-IPD# show application-assurance group 1 aa-sub transit <transit-aasub-name> summary
===============================================================================
Application-Assurance Subscriber summary (realtime | snapshot)
===============================================================================
AA-Subscriber        : <transit-aasub-name>
App-Profile          : <app-profile-name>
 
aa-filter            : aa-ip <aa-ip-filter-id> or aa-prefix <aa-prefix-filter-id>
    Parent               : SAP <sap-id> or Spoke-SDP <id> or N/A
    Parent ISA assigned  : <Slot/MDA> or <None (fail-to-closed | fail-to-open)> or Unassigned or N/A
    Parent app-profile   : <app-profile-name> or N/A
    Parent divert        : Yes or No or N/A
    Parent capacity-cost : 2000 or N/A
Traffic                   Octets            Packets         Flows	
-------------------------------------------------------------------------------
Admitted from subscriber: 0                 0               0
Denied from subscriber:   0                 0               0
Active flows from subscriber:                               0
Admitted to subscriber:   0                 0               0
Denied to subscriber:     0                 0               0
Active flows to subscriber:                                 0
Total flow duration:      0 seconds
Terminated flows:                                           0
Short Duration flows:                                       0
Medium Duration flows:                                      0
Long Duration flows:                                        0
 
Top App-Groups            Octets            Packets         Flows
-------------------------------------------------------------------------------
<app-group-name>          100000            3000            30
<app-group-name>          90000             3000            30
<app-group-name>          80000             3000            30
===============================================================================
A:ALA-IPD# 
show application-assurance group 1 aa-sub {esm <sub-ident-string> | sap <sap-id> |
spoke-sdp <sdp-id:vc-id> | transit <transit-aasub-name>} count
MINOR: CLI aa-sub esm|sap|transit <name> has too many flows to obtain real-time
stats, use aa-sub esm|sap|transit|spoke <sub-name> snapshot
 
 
A:ALA-IPD# show application-assurance group 1 aa-sub {esm <sub-ident-string> | 
sap <sap-id> | spoke-sdp <sdp-id:vc-id> | transit <transit-aasub-name>} snapshot
count
===============================================================================
Application-Assurance Subscriber esm|sap|spoke-sdp|transit <name>
Application Group, Application and Protocol Statistics (realtime | snapshot)
===============================================================================
Application Group                Disc Octets          Packets       Flows
-------------------------------------------------------------------------------
Games                              0% 0               0             0
Mail                               0% 0               0             0
Peer to Peer                       0% 0               0             0
Unknown                            0% 0               0             0
Web                                0% 0               0             0
===============================================================================
Application                      Disc Octets          Packets       Flows
-------------------------------------------------------------------------------
SIP                                0% 0               0             0
-------------------------------------------------------------------------------
Protocol statistics are not configured in statistics>aa-sub
===============================================================================
A:ALA-IPD# 
 
 
A:ALA-IPD# show application-assurance group 1 aa-sub {esm <sub-ident-string> | 
sap <sap-id> | spoke-sdp <sdp-id:vc-id> | transit <transit-aasub-name>} 
application count detail
===============================================================================
Application-Assurance Subscriber esm|sap|spoke-sdp|transit <name>			
Application Statistics (realtime | snapshot)
===============================================================================
    Subscriber                        Application:
Type                      Octets            Packets         Flows
-------------------------------------------------------------------------------
    name                              SIP:
Admitted from subscriber: 0                 0               0
Denied from subscriber:   0                 0               0
Active flows from subscriber:                               0
Admitted to subscriber:   0                 0               0
Denied to subscriber:     0                 0               0
Active flows to subscriber:                                 0
Max per min from sub:     1000              10
Max per min to sub:       2000              20
Total flow duration:      0 seconds
Terminated flows:                                           0
Short Duration flows:                                       0
Medium Duration flows:                                      0
Long Duration flows:                                        0
===============================================================================
A:ALA-IPD# 
aa-sub-list
Syntax
aa-sub-list [isa mda-id]
aa-sub-list policers-exceeded
aa-sub-list summary
Context
show>app-assure>group
Description
This command displays aa-subscriber lists.
Parameters
isa mda-id
Displays the slot and MDA ID.
Values
policers-exceeded
Displays the policer resources which are exceeded.
summary
Displays summary information.
Sample Output
show application-assurance group 1 aa-sub {esm <sub-ident-string> | sap <sap-id> 
| spoke-sdp <sdp-id:vc-id> } summary
===============================================================================
Application-Assurance Subscriber summary (realtime | snapshot)
===============================================================================
AA-Subscriber        : <sub-ident-string> or <sap-id> or <sdp-id:vc-id> 
ISA assigned         : <Slot/MDA> Unassigned
App-Profile          : <app-profile-name>
App-Profile divert   : Yes or No
capacity-cost        : 100 				// for sap/spoke-sdp & esm aa-sub)
Traffic                   Octets            Packets         Flows	
-------------------------------------------------------------------------------
Admitted from subscriber: 0                 0               0
Denied from subscriber:   0                 0               0
Active flows from subscriber:                               0
Admitted to subscriber:   0                 0               0
Denied to subscriber:     0                 0               0
Active flows to subscriber:                                 0
Total flow duration:      0 seconds
Terminated flows:                                           0
Short Duration flows:                                       0
Medium Duration flows:                                      0
Long Duration flows:                                        0
 
Top App-Groups            Octets            Packets         Flows
-------------------------------------------------------------------------------
<app-group-name>          100000            3000            30
<app-group-name>          90000             3000            30
<app-group-name>          80000             3000            30
-------------------------------------------------------------------------------
Application Service Options (ASO)
-------------------------------------------------------------------------------
Characteristic                   Value                            Derived from 
-------------------------------------------------------------------------------
Server                           Block                            default      
ServiceBw                        SuperUser                        app-profile  
Teleworker                       Yes                              override     
VideoBoost                       Priority                         override     
 
Total characteristics            : 4
Total derived from aso defaults  : 1
Total derived from app-profile   : 1
Total derived from overrides     : 2
-------------------------------------------------------------------------------
 
 
*A:Dut-C# show application-assurance group 224:10559 aa-sub-list 
============================================================================
Application-Assurance Subscriber List for Group 224:10559
============================================================================
type      aa-sub                   ISA      App-Profile              divert    
                                   assigned                                    
----------------------------------------------------------------------------
sap       1/1/1:113                3/2      prof_224_10559_1         Yes   
sap       1/1/1:241                3/2      prof_224_10559_1         Yes   
sap       1/1/1:369                3/2      prof_224_10559_1         Yes   
sap       1/1/1:497                3/2      prof_224_10559_1         Yes   
sap       1/1/4:113                3/2      prof_224_10559_2         Yes   
sap       1/1/4:241                3/2      prof_224_10559_2         Yes   
sap       1/1/4:369                3/2      prof_224_10559_2         Yes   
sap       1/1/4:497                3/2      prof_224_10559_2         Yes   
----------------------------------------------------------------------------
Total number of aa-subs found               : 8
============================================================================
*A:Dut-C# 
 
 
*A:Dut-C# show application-assurance group 224:10559 aa-sub-list isa 3/2 
============================================================================
Application-Assurance Subscriber List for Group 224:10559, isa 3/2
============================================================================
type      aa-sub                   ISA      App-Profile              divert    
                                   assigned                                    
----------------------------------------------------------------------------
sap       1/1/1:113                3/2      prof_224_10559_1         Yes   
sap       1/1/1:241                3/2      prof_224_10559_1         Yes   
sap       1/1/1:369                3/2      prof_224_10559_1         Yes   
sap       1/1/1:497                3/2      prof_224_10559_1         Yes   
sap       1/1/4:113                3/2      prof_224_10559_2         Yes   
sap       1/1/4:241                3/2      prof_224_10559_2         Yes   
sap       1/1/4:369                3/2      prof_224_10559_2         Yes   
sap       1/1/4:497                3/2      prof_224_10559_2         Yes   
----------------------------------------------------------------------------
Total number of aa-subs found               : 8
============================================================================
*A:Dut-C# 
 
A:ALA-IPD# show application-assurance group 2 aa-sub-list [isa <mda-id>] 
===========================================================================
Application-Assurance Subscriber List for Group 2, isa <slot/mda>
===========================================================================
type      aa-sub                   ISA      App-Profile              divert    
                                   assigned                                    
---------------------------------------------------------------------------
group 2:50
---------------------------------------------------------------------------
esm       Bob                      3/1      Grp2P50appProf1          Yes   
esm       Fred                     1/1      Grp2P50appProf2          Yes   
sap       1/2/9                    3/1      Grp2P50appProf1          Yes   
sap       1/2/10                   1/1      Grp2P50appProf2          Yes   
spoke-sdp 1:7                      1/1      Grp2P50appProf1          Yes   
spoke-sdp 2:101                    3/1      Grp2P50appProf2          Yes   
---------------------------------------------------------------------------
group 2:32656
---------------------------------------------------------------------------
esm       Alex                     1/1      appProf1                 Yes   
esm       Sub1                     3/1      Lite                     Yes   
esm       Max                      3/1      appProf1                 Yes   
esm       tcpr_sub                 1/1      appProf2                 Yes   
sap       1/2/5                    3/1      appProf1                 Yes   
sap       1/2/6                    1/1      appProf1                 Yes   
sap       2/2/4:111                1/1      Power                    Yes   
spoke-sdp 1:6                      1/1      appProf1                 Yes   
spoke-sdp 2:100                    3/1      appProf2                 Yes   
---------------------------------------------------------------------------
Number of aa-subs found in group 2:50       : 6
Number of aa-subs found in group 2:32656    : 9
Total number of aa-subs found               : 15
===========================================================================
A:ALA-IPD#
 
 
A:ALA-IPD# show application-assurance group 2:32656 aa-sub-list [isa <mda-id>
=========================================================================
Application-Assurance Subscriber List for Group 2:32656, isa <slot/mda>
=========================================================================
type    aa-sub                   ISA      App-Profile              divert      
                                 assigned                                      
-------------------------------------------------------------------------
esm       Alex                   1/1      appProf1                 Yes   
esm       Sub1                   3/1      Lite                     Yes   
esm       Max                    3/1      appProf1                 Yes   
esm       tcpr_sub               1/1      appProf2                 Yes   
sap       1/2/5                  3/1      appProf1                 Yes   
sap       1/2/6                  1/1      appProf1                 Yes   
sap       2/2/4:111              1/1      Power                    Yes
spoke-sdp 2:100                  1/1      appProf8                 Yes   
-------------------------------------------------------------------------
Number of aa-subs : 8
=========================================================================
A:ALA-IPD#
 
aa-sub-study
Syntax
aa-sub-study esm sub-ident-string [snapshot]
aa-sub-study sap sap-id
aa-sub-study spoke-sdp sdp-id:vc-id [snapshot]
aa-sub-study transit transit-aasub-name [snapshot]
Context
show>app-assure>group
Description
This command display per-subscriber special study statistics.
Parameters
esm sub-ident-string
Specifies an existing subscriber identification string.
sap sap-id
Specifies the physical port identifier portion of the SAP definition. Refer to Appendix A: Common CLI Command Descriptions for syntax.
spoke-id sdp-id:vc-id
Specifies the spoke SDP ID and VC ID.
Values
snapshot
Specifies that the statistics retrieved include the sum of the statistics from the previous collection windows, and the statistics for any closed flows since the last collection window.
transit transit-aasub-name
Specifies an existing transit subscriber name string.
app-group
Syntax
app-group [app-group-name] count [detail]
Context
show>app-assure>group>aa-sub
show>app-assure>group
Description
This command displays per-application-group statistics. System-wide statistics displayed account for all flows completed and the last internal snapshot of the active flows.
Parameters
app-group-name
Displays information about the specified application group name.
count
Displays the counters for the application group.
detail
Displays detailed information.
Sample Output
A:ALU>show>app-assure>group# app-group count 
===============================================================================
App-group Statistics
===============================================================================
Application Group                Disc Octets          Packets       Flows
-------------------------------------------------------------------------------
File Transfer                      0% 0               0             0
Games                              0% 3865532         4952          144
Infrastructure                     0% 174524          1217          1177
Instant Messaging                  0% 2979117         9930          97
Local Content                      0% 10581539        10942         74
Mail                               0% 57940           346           24
MultiMedia                         0% 76911464        79417         198
NNTP                               0% 0               0             0
Peer to Peer                       0% 10903442        13901         485
Premium Partner                    0% 0               0             0
Remote Connectivity                0% 0               0             0
Server                             0% 1097            8             2
Suspect                           72% 1012            11            11
Tunneling                          0% 19872617        33989         204
Unknown                            0% 5243395         27510         2648
Web                                0% 82135303        91828         2152
-------------------------------------------------------------------------------
A:ALU>show>app-assure>group# 
 
 
A:ALU>show>app-assure>group# app-group "MultiMedia" count detail 
===============================================================================
App-group "MultiMedia" Statistics
===============================================================================
Application Group:
Type                      Octets            Packets         Flows
-------------------------------------------------------------------------------
MultiMedia:
Admitted from subscriber: 193605            1797            23
Denied from subscriber:   0                 0               0
Active flows from subscriber:                               0
Admitted to subscriber:   4835822           3366            23
Denied to subscriber:     0                 0               0
Active flows to subscriber:                                 0
Total flow duration:      433 seconds
Terminated flows:                                           46
Short Duration flows:                                       36
Medium Duration flows:                                      10
Long Duration flows:                                        0
Active subscribers:       0
===============================================================================
A:ALU>show>app-assure>group# 
 
 
 
 
application
Syntax
application [application-name] count [detail]
Context
show>app-assure>group>aa-sub
show>app-assure>group
show>app-assure>group>aa-sub-study
Description
This command displays per-application statistics. The system-wide statistics displayed account for all flows completed and the last internal snapshot of the active flows.
Subscriber statistics are available for special-study subscribers and account for all completed and active flows at the moment of this statistics request.
Parameters
application-name
Displays information about the specified application name.
count
Displays counter information.
detail
Displays detailed information.
Sample Output
A:ALU-ABC>show>app-assure>group# application count 
===============================================================================
Application Statistics
===============================================================================
Application                      Disc Octets          Packets       Flows
-------------------------------------------------------------------------------
...
DHT                                0% 0               0             0
DNS_53                             0% 96781           627           627
DNS_Local                          0% 0               0             0
DNS_Server                         0% 276             3             3
DNS_Suspect                      100% 736             8             8
FTP                                0% 0               0             0
...
-------------------------------------------------------------------------------
A:ALU-ABC>show>app-assure>group# 
 
 
A:ALU-ABC>show>app-assure>group# application "POP3" count detail 
===============================================================================
Application "POP3" Statistics
===============================================================================
    Application:
Type                      Octets            Packets         Flows
-------------------------------------------------------------------------------
    POP3:
Admitted from subscriber: 14095             149             10
Denied from subscriber:   0                 0               0
Active flows from subscriber:                               0
Admitted to subscriber:   30707             128             10
Denied to subscriber:     0                 0               0
Active flows to subscriber:                                 0
Total flow duration:      7 seconds
Terminated flows:                                           20
Active subscribers:       0
A:ALU-ABC>show>app-assure>group# 
 
 
A:ALU>show>app-assure>group# application "HTTP_Video" count detail 
===============================================================================
Application "HTTP_Video" Statistics
===============================================================================
    Application:
Type                      Octets            Packets         Flows
-------------------------------------------------------------------------------
    HTTP_Video:
Admitted from subscriber: 369528            5404            36
Denied from subscriber:   0                 0               0
Active flows from subscriber:                               1
Admitted to subscriber:   15387734          10629           36
Denied to subscriber:     0                 0               0
Active flows to subscriber:                                 1
Total flow duration:      463 seconds
Terminated flows:                                           72
Short Duration flows:                                       66
Medium Duration flows:                                      6
Long Duration flows:                                        0
Active subscribers:       1
===============================================================================
A:ALU>show>app-assure>group# 
cflowd
Syntax
cflowd
Context
show>app-assure>group
Description
This command enables the context to display cflowd output.
collector
Syntax
collector [detail]
Context
show>app-assure>group>cflowd
Description
This command enables the context to display cflowd output.
Sample Output
A:ALU-A# show application-assurance group 1 cflowd collector
========================================================================
Application Assurance Cflowd Collectors for group 1
========================================================================
Host Address        Port  Version   Admin     Oper      Recs Sent          
------------------------------------------------------------------------
192.168.7.7         2055    10       up        up        0                  
192.168.7.8         2055    10       up        up        0                  
------------------------------------------------------------------------
Collectors : 2
------------------------------------------------------------------------
A:ALU-A#
 
A:ALU-A# show application-assurance group 1 cflowd collector detail
========================================================================
Application Assurance Cflowd Collectors for group 1
========================================================================
Address                      : 192.168.7.7
Port                         : 2055
Description                  : AA Collector 1
Version                      : 10
Admin State                  : up
Oper State                   : up
Records Sent                 : 0
Last Changed                 : 07/27/2009 13:36:50
 
Address                      : 192.168.7.8
Port                         : 2055
Description                  : AA Collector 2
Version                      : 10
Admin State                  : up
Oper State                   : up
Records Sent                 : 0
Last Changed                 : 07/27/2009 13:37:10
========================================================================
A:ALU-A# 
 
status
Syntax
status
Context
show>app-assure>group>cflowd
Description
This command display status information.
Sample Output
A:ALU-A# show application-assurance group 1 status [isa 1/2] cflowd    
========================================================================
Application-Assurance Group Cflowd Status
========================================================================
Cflowd Admin Status  : Enabled
Cflowd Oper Status   : Enabled
------------------------------------------------------------------------
Volume :
------------------------------------------------------------------------
 Sample Rate          : <Disabled> or <1 in 500 packets>
 Active Flows         : 23102
 Records Reported     : 12345
 Records Dropped      : 10
 Records Per Second   : 45
 Packets Sent         : 1763
 Packets Sent Per Sec : 7
------------------------------------------------------------------------
TCP Performance :
------------------------------------------------------------------------
 Sample Rate          : <Disabled> or <1 in 1000 flows>
 Active Flows         : 32103
 Flows Not Allocated  : 33
 Records Reported     : 12345678
 Records Dropped      : 100
 Records Per Second   : 456
 Packets Sent         : 2057613
 Packets Sent Per Sec : 76
========================================================================
A:ALU-A#
 
 
A:ALU-A#show application-assurance group <aa-group-id:[partition]> cflowd status 
========================================================================
Application-Assurance Group:Partition Cflowd Status
========================================================================
------------------------------------------------------------------------
Volume :
------------------------------------------------------------------------
 Admin State          : Up
 Records Reported     : 12345
 Records Dropped      : 10
------------------------------------------------------------------------
TCP Performance :
------------------------------------------------------------------------
 Admin State          : Up
 Flows Not Allocated  : 33
 Records Reported     : 12345678
 Records Dropped      : 100
 
========================================================================
A:ALU-A#
dns-ip-cache
Syntax
dns-ip-cache cache-name isa mda-id
dns-ip-cache cache-name
Context
show>app-assure>group
Description
This command displays the application assurance DNS IP cache statistics and status information.
Parameters
isa mda-id
Specifies the DNS IP cache for a particular ISA-AA card.
Output
The following table describes the show command output fields:
 
Sample Output
*A:7750# show application-assurance group 1 dns-ip-cache "Default DNS IP Cache" 
===============================================================================
Application Assurance Group 1 dns-ip-cache "Default DNS IP Cache"
===============================================================================
Admin Status                : Up
 
Domain expressions          : 11 (out of 32)
Server addresses            : 0 (out of 64)
High watermark              : 40%
Low watermark               : 35%
Cache size                  : 5000
 
-------------------------------------------------------------------------------
ISA                        Usage         (%)        Alarm             Hit Count
                                                    State                      
-------------------------------------------------------------------------------
1/2                            0     (0.00%)        clear                     0
3/2                          133    (88.66%)       raised                    18
===============================================================================
 
*A:7750# show application-assurance group 1 dns-ip-cache "Default DNS IP Cache" isa 3/1 
===============================================================================
Application Assurance Group 1 dns-ip-cache "Default DNS IP Cache" ISA 3/1
===============================================================================
Admin Status                : Up
 
Domain expressions          : 11 (out of 32)
Server addresses            : 0 (out of 64)
High watermark              : 40%
Low watermark               : 35%
Cache size                  : 5000
 
-------------------------------------------------------------------------------
ISA 3/1 DNS Stats
-------------------------------------------------------------------------------
DNS
    Total responses         : 5751
    Domain name matched     : 106
    Domain & server matched : 106
Cache
    Total entries added     : 118
    Total entries removed   : 0
    Usage                   : 118 (2.36%) threshold alarm clear
    Full count              : 0
 
    Hit count               : 274
    Miss count              : 20379
===============================================================================
http-enrich
Syntax
http-enrich enrichment-name
Context
show>app-assure>group
Description
This command displays HTTP enrichment information.
Parameters
enrichment-name
Specifies the name of the HTTP enrichment policy up to 32 characters in length.
Sample Output
*B:7750-AA-1# show application-assurance group 2 http-enrich "Enrich_policy1"        
 
===============================================================================
Application Assurance Group 2 HTTP Enrichment " Enrich_policy1"
===============================================================================
Description   : Policy to enrich HTTP requests with MD5 hash of Subscriber-id
                + subscriber-ip + static string
Admin Status  : Up
AQP Referenced: No
-------------------------------------------------------------------------------
Name                             Field                            Enabled
                                                                  Features
-------------------------------------------------------------------------------
static-string                    testString                     
subscriber-id                    X-subid                          M
subscriber-ip                    X-subip                          M
-------------------------------------------------------------------------------
                                                      A=anti-spoof,M=encode-md5
 
----------------------------------------------------------------------
Group               Enriched                 Not Enriched
----------------------------------------------------------------------
2:1                 12587                    3
2:2                 0                        0
----------------------------------------------------------------------
Total               12587                    3
----------------------------------------------------------------------
 
detail
Syntax
detail [partition]
Context
show>app-assure>group>http-enrich
Description
This command displays detailed HTTP Enrichment information.
field
Syntax
field field-name
Context
show>app-assure>group>http-enrich
Description
This command displays HTTP enrichment field information.
fields
Syntax
fields
Context
show>app-assure
Description
This command displays HTTP enrichment fields.
summary
Syntax
summary
Context
show>app-assure>group>http-enrich
Description
This command displays summarized HTTP enrichment information.
count
Syntax
count [detail]
Context
show>app-assure>group>aa-sub
Description
This command displays per-subscriber app-group application and protocol statistics.
Parameters
detail
Displays detailed information.
Sample Output
A:ALU>show>app-assure>group>aa-sub# count 
===============================================================================
Application-Assurance Subscriber TestSubscriberName
Application Group, Application and Protocol Statistics
===============================================================================
Application Group                Disc Octets          Packets       Flows
-------------------------------------------------------------------------------
Database                           0% 0               0             0
File Transfer                      0% 27243           169           22
Games                              0% 0               0             0
Infrastructure                     0% 71494           555           515
Instant Messaging                  0% 4947792         25587         411
Local Content                      0% 923             8             2
Mail                               0% 53729           318           22
Mail Server                        0% 0               0             0
MultiMedia                         0% 31670667        33087         142
NNTP                               0% 0               0             0
Peer to Peer                     .45% 11096224        16339         2431
Premium Partner                    0% 0               0             0
Remote Connectivity                0% 15321           171           2
Server                             0% 0               0             0
Suspect                           72% 1012            11            11
Tunneling                          0% 19659289        33535         164
Unknown                            0% 1945164         6317          287
Web                                0% 29538078        34873         1022
Web Server                         0% 0               0             0
===============================================================================
Application                      Disc Octets          Packets       Flows
-------------------------------------------------------------------------------
HTTP_Local                         0% 923             8             2
===============================================================================
Protocol                         Disc Octets          Packets       Flows
-------------------------------------------------------------------------------
dns                              1.8% 40010           277           277
===============================================================================
A:ALU>show>app-assure>group>aa-sub# 
 
 
A:ALU>show>app-assure>group>aa-sub# count detail 
===============================================================================
Application-Assurance Subscriber TestSubscriberName
Application Group, Application and Protocol Statistics
===============================================================================
    Subscriber                        Application Group:
Type                      Octets            Packets         Flows
-------------------------------------------------------------------------------
    TestSubscriberName                Instant Messaging:
Admitted from subscriber: 2558576           12720           229
Denied from subscriber:   0                 0               0
Active flows from subscriber:                               0
Admitted to subscriber:   2389216           12867           182
Denied to subscriber:     0                 0               0
Active flows to subscriber:                                 0
Total flow duration:      2912 seconds
Terminated flows:                                           411
Short Duration flows:                                       387
Medium Duration flows:                                      22
Long Duration flows:                                        2
 ...
    TestSubscriberName                Web:
Admitted from subscriber: 2343429           22806           511
Denied from subscriber:   0                 0               0
Active flows from subscriber:                               1
Admitted to subscriber:   56359191          40528           511
Denied to subscriber:     0                 0               0
Active flows to subscriber:                                 1
Total flow duration:      4783 seconds
Terminated flows:                                           1020
Short Duration flows:                                       989
Medium Duration flows:                                      31
Long Duration flows:                                        0
===============================================================================
    Subscriber                        Application:
Type                      Octets            Packets         Flows
-------------------------------------------------------------------------------
    TestSubscriberName                HTTP_Local:
Admitted from subscriber: 0                 0               0
Denied from subscriber:   0                 0               0
Active flows from subscriber:                               0
Admitted to subscriber:   0                 0               0
Denied to subscriber:     0                 0               0
Active flows to subscriber:                                 0
Total flow duration:      0 seconds
Terminated flows:                                           0
Short Duration flows:                                       0
Medium Duration flows:                                      0
Long Duration flows:                                        0
===============================================================================
    Subscriber                        Protocol:
Type                      Octets            Packets         Flows
-------------------------------------------------------------------------------
    TestSubscriberName                dns:
Admitted from subscriber: 0                 0               0
Denied from subscriber:   0                 0               0
Active flows from subscriber:                               0
Admitted to subscriber:   0                 0               0
Denied to subscriber:     0                 0               0
Active flows to subscriber:                                 0
Total flow duration:      0 seconds
Terminated flows:                                           0
Short Duration flows:                                       0
Medium Duration flows:                                      0
Long Duration flows:                                        0
===============================================================================
A:ALU>show>app-assure>group>aa-sub# 
admin
Syntax
admin
Context
show>app-assure>group>policy
Description
This command displays the application-assurance policy uncommitted changes.
Sample Output
*A:ALA-48>show>app-assure>group>policy# admin
                begin
                app-filter
                    entry 10 create
                        shutdown
                    exit
                exit
                app-qos-policy
                    entry 10 create
                        shutdown
                    exit
                exit
                commit
*A:ALA-48>show>app-assure>group>policy#
app-filter
Syntax
app-filter [entry-id]
Context
show>app-assure>group>policy
Description
This command displays application-assurance policy filter information.
Parameters
entry-id
Specifies an existing application filter entry.
Values
app-group
Syntax
app-group [app-group-name]
Context
show>app-assure>group>policy
Description
This command displays application-assurance policy application group information.
app-profile
Syntax
app-profile [app-prof-name]
app-profile app-prof-name associations
Context
show>app-assure>group>policy
Description
This command displays application-assurance policy application profile information.
Parameters
app-prof-name
Specifies an existing application profile name.
associations
Displays subscriber management associations.
app-qos-policy
Syntax
app-qos-policy [entry-id]
Context
show>app-assure>group>policy
Description
This command displays application-assurance policy application QoS policy information.
Parameters
entry-id
Specifies an existing applicatin QoS policy entry id.
Values
app-service-option
Syntax
app-service-option [characteristic-name]
Context
show>app-assure>group>policy
Description
This command displays application-assurance policy application service option information.
application
Syntax
application [app-name]
Context
show>app-assure>group>policy
Description
This command displays application-assurance policy application information.
custom-protocol
Syntax
custom-protocol
Context
show>app-assure>group>policy
Description
This command displays application-assurance policy custom protocol information.
summary
Syntax
summary
Context
show>app-assure>group>policy
Description
This command displays application-assurance policy summary information.
policer
Syntax
policer
policer policer-name [detail]
policer summary
Context
show>app-assure>group>policy>aa-sub
Description
This command displays policer configuration information.
Sample Output
A:cpm-a>show>app-assure>group>aa-sub# policers 
===============================================================================
Application-Assurance Subscriber Policer Summary
===============================================================================
AA-Subscriber       : Alex (esm)
-------------------------------------------------------------------------------
Type: single-bucket-bandwidth Direction: subscriber-to-network
-------------------------------------------------------------------------------
AQP   Policer                          Resources Exceeded?                     
-------------------------------------------------------------------------------
61    SuspectUp_policer                N                                      
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Type: single-bucket-bandwidth Direction: network-to-subscriber
-------------------------------------------------------------------------------
AQP   Policer                          Resources Exceeded?                     
-------------------------------------------------------------------------------
62    SuspectDown_policer              N                                      
-------------------------------------------------------------------------------
Policer usage counts:
single-bucket-bandwidth               
  subscriber-to-network  1     out of    32
  network-to-subscriber  1     out of    32
dual-bucket-bandwidth
  subscriber-to-network  0     out of     1
  network-to-subscriber  0     out of     1
flow-count-limit         0     out of     8
flow-rate-limit          0     out of     8
===============================================================================
A:cpm-a>show>app-assure>group>aa-sub# 
summary
Syntax
summary
Context
show>app-assure>group>policy
show>app-assure>group>aa-sub
Description
This command displays application-assurance policy summary information.
protocol
Syntax
protocol [protocol-name] count [detail]
Context
show>app-assure>group>aa-sub
show>app-assure>group
Description
This command displays per-protocol statistics. The system-wide statistics displayed account for all flows completed and the last internal snapshot of the active flows.
Subscriber statistics are available for special study subscribers and account for all completed and active flows at the moment of this statistics request.
Parameters
protocol-name
Displays information about the specified protocol name.
count
Displays protocol counters.
detail
Displays detailed information.
Sample Output
A:ALU>show>app-assure>group# protocol count 
===============================================================================
Protocol Statistics
===============================================================================
Protocol                         Disc Octets          Packets       Flows
-------------------------------------------------------------------------------
aim_oscar                          0% 0               0             0
aim_oscar_file_xfer                0% 0               0             0
aim_oscar_video_voice              0% 0               0             0
aim_toc                            0% 0               0             0
bittorrent                         0% 0               0             0
...
 
 
A:ALU>show>app-assure>group# protocol "http_audio" count detail 
===============================================================================
Protocol "http_audio" Statistics
===============================================================================
    Protocol:
Type                      Octets            Packets         Flows
-------------------------------------------------------------------------------
    http_audio:
Admitted from subscriber: 14958             201             2
Denied from subscriber:   0                 0               0
Active flows from subscriber:                               0
Admitted to subscriber:   587590            396             2
Denied to subscriber:     0                 0               0
Active flows to subscriber:                                 0
Total flow duration:      21 seconds
Terminated flows:                                           4
Short Duration flows:                                       4
Medium Duration flows:                                      0
Long Duration flows:                                        0
Active subscribers:       1
===============================================================================
A:ALU>show>app-assure>group# 
 
session-filter
Syntax
session-filter
session-filter session-filter-name
Context
show>app-assure>group
Description
This command displays session filter information.
Parameters
session-filter-name
Specifies a session-filter-name up to 32 characters.
Sample Output
show application-assurance group <aa-group-id>[:<partition>] session-filter <filter-name>
# session-filter<filter-id>
========================================================================
AA Session Filter
========================================================================
Filter Name  : Block UDP Session Initiation
Applied      : Yes                        Def. Action    : Permit
Entries      : 1
Description  : Block UDP initiated towards subscribers 
------------------------------------------------------------------------
Filter Match Criteria
------------------------------------------------------------------------
Entry        : 1
Description  : (Not Specified)
Protocol     : 17
Action       : deny
Hit Count    : 0 pkts
========================================================================
 
summary
Syntax
summary
Context
show>app-assure>group>aa-sub
Description
This command displays a summary of statistics for a specific aa-sub.
Sample Output
A:ALU>show>app-assure>group>aa-sub# summary 
===============================================================================
Application-Assurance Subscriber Summary 
===============================================================================
AA-Subscriber       : TestSubscriberName
ISA assigned        : 3/2
App-Profile         : Power_Profile
App-Profile divert  : Yes
-------------------------------------------------------------------------------
Traffic                   Octets            Packets         Flows
-------------------------------------------------------------------------------
Admitted from subscriber: 7092548           52935           2843
Denied from subscriber:   51160             617             374
Active flows from subscriber:                               12
Admitted to subscriber:   73705675          73538           1453
Denied to subscriber:     0                 0               0
Active flows to subscriber:                                 12
Total flow duration:      12750 seconds
Terminated flows:                                           4646
Short Duration flows:                                       4516
Medium Duration flows:                                      130
Long Duration flows:                                        0
-------------------------------------------------------------------------------
Top App-Groups                   Octets            Packets         Flows
-------------------------------------------------------------------------------
MultiMedia                       29060053          29961           138
Tunneling                        19659289          33535           164
Web                              14856331          19829           932
===============================================================================
A:ALU>show>app-assure>group>aa-sub# 
usage-monitor
Syntax
usage-monitor status
usage-monitor [{application [application-name] | app-group [app-group-name] | charging-group [charging-group-name]}] count
Context
show>app-assure>group>aa-sub
Description
This command displays per-subscriber usage-monitoring statistics.
status
Syntax
status [isa mda-id] cflowd
status [isa mda-id]
status [isa mda-id] detail
status [isa mda-id] cpu [sample-period seconds]
status {isa mda-id} qos count
status {isa mda-id} qos pools
Context
show>app-assure>group
Description
This command displays system statistics.
Parameters
isa
Displays information about the specified AA ISA.
cflowd
Displays cflowd status information.
detail
Displays detailed status information.
cpu [sample-period seconds]
Displays cpu utilization info about the specified AA ISA. The isa mda-id must be specified. The sample period can be specified within a range of 1 5 seconds (default 1s).
Values
qos count
Displays information about queue statistics. The isa mda-id must be specified.
qos pools
Displays information about pool utilization. The isa mda-id must be specified.
Sample Output
A:ALU>show>app-assure>group# status 
===============================================================================
Application-assurance Status
===============================================================================
Last time change affecting status: 01/30/2009 20:14:37
Active Subs                      : 1
-------------------------------------------------------------------------------
                         Packets              Octets
-------------------------------------------------------------------------------
Diverted traffic       : 58783                46140537
Diverted discards      : 4                    0
Entered ISA-AAs        : 58784                46140614
Discarded in ISA-AAs   : 60                   4620
Exited ISA-AAs         : 58724                46135994
Returned discards      : 0                    0
Returned traffic       : 58724                46135994
===============================================================================
A:ALU>show>app-assure>group# 
 
 
A:ALU>show>app-assure>group# status detail 
===============================================================================
Application-assurance Status
===============================================================================
Last time change affecting status: 01/30/2009 20:14:37
Number of Active ISAs            : 2
Flows                            : 2364
Active Flows                     : 41
Flow Setup Rate                  : 2 per second
Traffic Rate                     : 1 Mbps
AA-Subs Downloaded               : 30
Active Subs                      : 1
-------------------------------------------------------------------------------
                         Packets              Octets
-------------------------------------------------------------------------------
Diverted traffic       : 60744                47206604
Diverted discards      : 4                    0
    Congestion         : 0                    0
    Errors             : 4                    N/A
Entered ISA-AAs        : 60745                47206968
Buffered in ISA-AAs    : 0                    0
Discarded in ISA-AAs   : 164                  12759
    Policy             : 164                  12759
    Congestion         : 0                    0
    Errors             : 0                    0
Errors (policy bypass) : 1                    60
Exited ISA-AAs         : 60581                47194209
Returned discards      : 0                    0
    Congestion         : 0                    0
    Errors             : 0                    N/A
Returned traffic       : 60580                47193845
===============================================================================
A:ALU>show>app-assure>group# 
 
===============================================================================
Application-Assurance Status
===============================================================================
Last time change affecting status : 09/28/2012 14:19:05
Number of Active ISAs             : 1
Flows                             : 62
Flow Resources In Use             : 0
AA-Subs Created                   : 200
AA-Subs Deleted                   : 149
AA-Subs Modified                  : 3
Seen-IP Requests Sent             : 0
Seen-IP Requests Dropped          : 0
-------------------------------------------------------------------------------
                                    Current    Average    Peak
-------------------------------------------------------------------------------
Active Flows                      : 0          0          16
Flow Setup Rate (per second)      : 0          0          1
Traffic Rate (Mbps)               : 0          0          0
Packet Rate (per second)          : 0          0          6
AA-Subs Downloaded                : 51         51         51
Active Subs                       : 0          0          1
 
A:ALU>show>app-assure>group# status isa 3/2 qos count 
===============================================================================
Application-assurance Queue Statistics for ISA-AA Group: 1, isa 3/2
===============================================================================
                                                                               
-------------------------------------------------------------------------------
 
Egress From-Subscriber
     Queue  1                Packets                 Octets
     In Profile  forwarded :    0                       0                      
     In Profile  dropped   :    0                       0                      
     Out Profile forwarded :    28940                   3767233                
     Out Profile dropped   :    0                       0                      
     Queue  2                Packets                 Octets
     In Profile  forwarded :    0                       0                      
     In Profile  dropped   :    0                       0                      
     Out Profile forwarded :    0                       0                      
     Out Profile dropped   :    0                       0                      
 
Egress To-Subscriber
     Queue  1                Packets                 Octets
     In Profile  forwarded :    0                       0                      
     In Profile  dropped   :    0                       0                      
     Out Profile forwarded :    44499                   53066848               
     Out Profile dropped   :    0                       0                      
     Queue  2                Packets                 Octets
     In Profile  forwarded :    0                       0                      
     In Profile  dropped   :    0                       0                      
     Out Profile forwarded :    0                       0                      
     Out Profile dropped   :    0                       0                      
 
 
Ingress From-Subscriber
     Queue  1                Packets                 Octets
     In Profile  forwarded :    25548                   3361023                
     In Profile  dropped   :    0                       0                      
     Out Profile forwarded :    1                       60                     
     Out Profile dropped   :    0                       0                      
     Queue  2                Packets                 Octets
     In Profile  forwarded :    2921                    365606                 
     In Profile  dropped   :    0                       0                      
     Out Profile forwarded :    0                       0                      
     Out Profile dropped   :    0                       0                      
     Queue  9                Packets                 Octets
     In Profile  forwarded :    0                       0                      
     In Profile  dropped   :    0                       0                      
     Out Profile forwarded :    0                       0                      
     Out Profile dropped   :    0                       0                      
     Queue 10                Packets                 Octets
     In Profile  forwarded :    0                       0                      
     In Profile  dropped   :    0                       0                      
     Out Profile forwarded :    0                       0                      
     Out Profile dropped   :    0                       0                      
 
Ingress To-Subscriber
     Queue  1                Packets                 Octets
     In Profile  forwarded :    39541                   46899769               
     In Profile  dropped   :    0                       0                      
     Out Profile forwarded :    1                       92                     
     Out Profile dropped   :    0                       0                      
     Queue  2                Packets                 Octets
     In Profile  forwarded :    5050                    6291204                
     In Profile  dropped   :    0                       0                      
     Out Profile forwarded :    0                       0                      
     Out Profile dropped   :    0                       0                      
     Queue  9                Packets                 Octets
     In Profile  forwarded :    0                       0                      
     In Profile  dropped   :    0                       0                      
     Out Profile forwarded :    0                       0                      
     Out Profile dropped   :    0                       0                      
     Queue 10                Packets                 Octets
     In Profile  forwarded :    0                       0                      
     In Profile  dropped   :    0                       0                      
     Out Profile forwarded :    0                       0                      
     Out Profile dropped   :    0                       0                      
===============================================================================
A:ALU>show>app-assure>group# 
 
 
A:ALU>show>app-assure>group# status isa 3/2 qos pools 
===============================================================================
Pool Information
===============================================================================
MDA                  : 3/2                                                     
Application          : Net-Ing           Pool Name          : default          
Resv CBS             : 50%                                                     
-------------------------------------------------------------------------------
Utilization                   State       Start-Avg    Max-Avg    Max-Prob
-------------------------------------------------------------------------------
High-Slope                    Up                70%        90%         80%
Low-Slope                     Up                50%        75%         80%
 
Time Avg Factor      : 7                                                       
Pool Total           : 40960 KB                                                
Pool Shared          : 20480 KB          Pool Resv          : 20480 KB         
 
High Slope Start Avg : 12288 KB          High slope Max Avg : 16384 KB         
Low Slope Start Avg  : 10240 KB          Low slope Max Avg  : 14336 KB         
 
Pool Total In Use    : 0 KB                                                    
Pool Shared In Use   : 0 KB              Pool Resv In Use   : 0 KB             
WA Shared In Use     : 0 KB                                                    
 
Hi-Slope Drop Prob   : 0                 Lo-Slope Drop Prob : 0                
-------------------------------------------------------------------------------
FC-Maps                         Dest     MBS         Depth  A.CIR     A.PIR
 Q-Grp                          Q-Id     CBS                O.CIR     O.PIR
-------------------------------------------------------------------------------
be af l1 h2 ef h1 nc            5/*      20480       0      8000000   20000000 
                                1        1280               8000000   Max      
be af l1 h2 ef h1 nc            4/*      20480       0      8000000   20000000 
                                1        1280               8000000   Max      
be af l1 h2 ef h1 nc            3/1      20480       0      8000000   20000000 
                                1        1280               8000000   Max      
be af l1 h2 ef h1 nc            2/1      20480       0      8000000   20000000 
                                1        1280               8000000   Max      
be af l1 h2 ef h1 nc            1/1      20480       0      8000000   20000000 
                                1        1280               8000000   Max      
be af l1 h2 ef h1 nc            5/*      20480       0      8000000   20000000 
                                1        1280               8000000   Max      
be af l1 h2 ef h1 nc            4/*      20480       0      8000000   20000000 
                                1        1280               8000000   Max      
...
===============================================================================
Pool Information
===============================================================================
Port                 : 3/2/fm-sub                                              
Application          : Net-Egr           Pool Name          : default          
Resv CBS             : 50%                                                     
-------------------------------------------------------------------------------
Queue-Groups
-------------------------------------------------------------------------------
Utilization                   State       Start-Avg    Max-Avg    Max-Prob
-------------------------------------------------------------------------------
High-Slope                    Up                70%        90%         80%
Low-Slope                     Up                50%        75%         80%
 
Time Avg Factor      : 7                                                       
Pool Total           : 12288 KB                                                
Pool Shared          : 6144 KB           Pool Resv          : 6144 KB          
 
High Slope Start Avg : 4096 KB           High slope Max Avg : 5120 KB          
Low Slope Start Avg  : 3072 KB           Low slope Max Avg  : 4096 KB          
 
Pool Total In Use    : 0 KB                                                    
Pool Shared In Use   : 0 KB              Pool Resv In Use   : 0 KB             
WA Shared In Use     : 0 KB                                                    
 
Hi-Slope Drop Prob   : 0                 Lo-Slope Drop Prob : 0                
-------------------------------------------------------------------------------
FC-Maps                         ID       MBS         Depth  A.CIR     A.PIR
 Q-Grp                          Q-Id     CBS                O.CIR     O.PIR
-------------------------------------------------------------------------------
be af l1 h2 ef h1 nc            3/2/fm-* 8192        0      4000000   10000000 
                                1        5120               4000000   5000000  
l2                              3/2/fm-* 6144        0      6000000   10000000 
                                2        3584               5000000   5000000  
===============================================================================
Pool Information
===============================================================================
Port                 : 3/2/to-sub                                              
Application          : Net-Egr           Pool Name          : default          
Resv CBS             : 50%                                                     
-------------------------------------------------------------------------------
Queue-Groups
-------------------------------------------------------------------------------
Utilization                   State       Start-Avg    Max-Avg    Max-Prob
-------------------------------------------------------------------------------
High-Slope                    Up                70%        90%         80%
Low-Slope                     Up                50%        75%         80%
 
Time Avg Factor      : 7                                                       
Pool Total           : 24576 KB                                                
Pool Shared          : 12288 KB          Pool Resv          : 12288 KB         
 
High Slope Start Avg : 8192 KB           High slope Max Avg : 10240 KB         
Low Slope Start Avg  : 6144 KB           Low slope Max Avg  : 8192 KB          
 
Pool Total In Use    : 0 KB                                                    
Pool Shared In Use   : 0 KB              Pool Resv In Use   : 0 KB             
WA Shared In Use     : 0 KB                                                    
                                      
Hi-Slope Drop Prob   : 0                 Lo-Slope Drop Prob : 0                
-------------------------------------------------------------------------------
FC-Maps                         ID       MBS         Depth  A.CIR     A.PIR
 Q-Grp                          Q-Id     CBS                O.CIR     O.PIR
-------------------------------------------------------------------------------
be af l1 h2 ef h1 nc            3/2/to-* 16384       0      4000000   10000000 
                                1        10240              4000000   Max      
l2                              3/2/to-* 12288       0      6000000   10000000 
                                2        7168               6000000   Max      
===============================================================================
A:ALU>show>app-assure>group# 
 
traffic-type
Syntax
traffic-type detail
traffic-type ip-family
traffic-type ip-protocol
Context
show>app-assure>group
Description
This command displays per traffic type statistics.
Parameters
detail
Displays detailed statistics.
ip-family
Displays IP family statistics.
ip-protocol
Displays IP protocol statistics.
transit-ip-policy
Syntax
transit-ip-policy ip-policy-id
transit-ip-policy summary
transit-ip-policy ip-policy-id summary
Context
show>app-assure>group
Description
This command displays transit IP policy information.
Parameters
ip-policy-id
Displays information for the specified IP policy.
Values
summary
Displays summarized information.
transit-prefix-policy
Syntax
transit-prefix-policy transit-prefix-policy-id
transit-prefix-policy summary
transit-prefix-policy transit-prefix-policy-id summary
Context
show>app-assure>group
Description
This command displays transit prefix policy information.
Parameters
transit-prefix-policy-id
Displays information for the specified transit prefix policy.
Values
summary
Displays summarized information.
url-list
Syntax
url-list url-list-name
Context
show>app-assure>group
Description
This command displays information about the configured url-list providing the following information:
Parameters
url-list-name
Specifies the name of the URL list to display.
Output
Show Command Output
The following table describes the show command output fields:
 
Sample Output
7750# show application-assurance group 1 url-list "url-list1"
===========================================================================
Application Assurance Group 1 url-list "url-list2"
===========================================================================
Description : (Not Specified)
Admin Status : Up
Oper Status : Up
Oper Flags : <none>
File deployed to ISAs : Yes
---------------------------------------------------------------------------
Upgrade Statistics
---------------------------------------------------------------------------
Last Success : 01/20/2015 11:33:29
Deployed
File Name : cf3:\url-list1.enc
URL Entries : 1000
Blank/Comment Lines : 0
Last Attempt : 01/20/2015 11:33:29
Result : Success
File Name : cf3:\url-list1.enc
===========================================================================
 
7750# show application-assurance group 1 url-list "url-list1"
===========================================================================
Application Assurance Group 1 url-list "url-list1"
===========================================================================
Description : (Not Specified)
Admin Status : Up
Oper Status : Up
Oper Flags : <none>
File deployed to ISAs : Yes
 
---------------------------------------------------------------------------
Upgrade Statistics
---------------------------------------------------------------------------
Last Success : 01/21/2015 14:03:54
Deployed
File Name : cf3:\url-list1.txt
URL Entries : 0
Blank/Comment Lines : 0
Last Attempt : 01/21/2015 14:06:39
Result : Failure
File Name : cf3:\url-list1.txt
Error Line : 0
Reason : invalid-file-format
Detail : Decryption failed
===========================================================================
url-filter
Syntax
url-filter url-filter-name
url-filter url-filter-name isa card/mda
url-filter url-filter-name isa card/mda detail
Context
show>app-assure>group
Description
This command displays information about the configured url-filter policy along with some associated raw statistics. These output statistics are:
In addition to these counters the system will count the type of action taken by the url-filter policy (allow, block, redirect, default) as well as the type of responses received from the icap server (allow, block, redirect, late).
Parameters
url-filter-name
Specifies the name of the url-filter policy.
card/mda
Specifies the card/mda reference of the ISA card.
detail
Specifies detailed statistics related to the ISA card.
Sample Output
A:7750# show application-assurance group 1 url-filter "filter1"         
===============================================================================
Application Assurance Group 1 URL Filter "filter1"
===============================================================================
Description            : (Not Specified)
Admin Status           : Up
Oper Status            : up
Oper Flags             : 
 
Default Action         : block-http-redirect http-redirect-portal
HTTP Request Filtering : all
HTTP Redirect          : http-redirect-portal
AQP Referenced         : Yes
 
ICAP Filter
    Custom X-Header    : Filtering-Policy
    VLAN Id            : 10
-------------------------------------------------------------------------------
Total Connection Stats
-------------------------------------------------------------------------------
HTTP Requests   : 17                    ICAP Requests   : 17
HTTP Req Errors : 0                     ICAP Req Errors : 0
 
HTTP Response Actions                   ICAP Responses
    Allow       : 17                        Allow       : 17
    Block       : 0                         Block       : 0
    Redirect    : 0                         Redirect    : 0
    Default     : 0                     Late ICAP Resp  : 0
===============================================================================
 
 
A:Dut-D# show application-assurance group 1 url-filter "filter1" isa 1/2 
===============================================================================
Application Assurance Group 1 URL Filter "filter1" ISA 1/2
===============================================================================
Description            : (Not Specified)
Admin Status           : Up
Oper Status            : up
Oper Flags             : 
 
Default Action         : block-http-redirect http-redirect-portal
HTTP Request Filtering : all
HTTP Redirect          : http-redirect-portal
AQP Referenced         : Yes
 
ICAP Filter
    Custom X-Header    : Filtering-Policy
    VLAN Id            : 10
 
AA Interface         : aa-if1
Service              : IES 1
SAP Id               : 1/2/aa-svc:10
ICAP Client IP       : 172.16.2.0/31
-------------------------------------------------------------------------------
ISA 1/2 Connection Stats
-------------------------------------------------------------------------------
HTTP Requests   : 17                    ICAP Requests   : 17
HTTP Req Errors : 0                     ICAP Req Errors : 0
 
HTTP Response Actions                   ICAP Responses
    Allow       : 17                        Allow       : 17
    Block       : 0                         Block       : 0
    Redirect    : 0                         Redirect    : 0
    Default     : 0                     Late ICAP Resp  : 0
-------------------------------------------------------------------------------
ISA 1/2 ICAP Connection Stats
-------------------------------------------------------------------------------
ICAP Server                             Oper        Request Rate    Round Trip 
                                        Status      (per second)  (microsecond)
-------------------------------------------------------------------------------
172.16.1.101                            Up                     0           996
-------------------------------------------------------------------------------
===============================================================================
 
 
A:Dut-D# show application-assurance group 1 url-filter "filter1" isa 1/2 detail 
===============================================================================
Application Assurance Group 1 URL Filter "filter1" ISA 1/2
===============================================================================
Description            : (Not Specified)
Admin Status           : Up
Oper Status            : up
Oper Flags             : 
 
Default Action         : block-http-redirect http-redirect-portal
HTTP Request Filtering : all
HTTP Redirect          : http-redirect-portal
AQP Referenced         : Yes
 
ICAP Filter
    Custom X-Header    : Filtering-Policy
    VLAN Id            : 10
 
AA Interface         : aa-if1
Service              : IES 1
SAP Id               : 1/2/aa-svc:10
ICAP Client IP       : 172.16.2.0/31
-------------------------------------------------------------------------------
ISA 1/2 Connection Stats
-------------------------------------------------------------------------------
HTTP Requests   : 17                    ICAP Requests   : 17
HTTP Req Errors : 0                     ICAP Req Errors : 0
 
HTTP Response Actions                   ICAP Responses
    Allow       : 17                        Allow       : 17
    Block       : 0                         Block       : 0
    Redirect    : 0                         Redirect    : 0
    Default     : 0                     Late ICAP Resp  : 0
-------------------------------------------------------------------------------
ICAP Server 172.16.1.101 ISA 1/2
-------------------------------------------------------------------------------
Description   : (Not Specified)
Admin Status  : Up
Oper Status   : Up
Oper Flags    : 
 
Established Connections   : 10 of 10 connections
Connection Utilization    : 0%
Request Rate              : 0 per second
Round Trip Time           : 996 microseconds
===============================================================================
charging-group
Syntax
charging-group [charging-group-name] count [detail]
charging-group count top granularity [max-count max-count]
Context
show>app-assure>group>aa-sub
Description
This command displays application-assurance group charging group information.
Parameters
charging-group-name
Specifies an existing charging group.
count
Displays the counters for the charging group.
detail
Displays detailed information.
top
Displays counters sorted by granularity.
granularity
Specifies the granularity of the search.
Values
max-count max-count
Specifies the maximum flows to display.
Values
http-notification
Syntax
http-notification http-notification-name
Context
show>app-assure>group
Description
This command displays information about the configured http-notification policy with associated raw statistics:
Parameters
http-notification-name
Displays the name of the http-notification policy.
Output
A:7750# show application-assurance group 1 http-notification "in-browser-notifica
tion"
===============================================================================
Application Assurance Group 1 HTTP Notification "in-browser-notification"
===============================================================================
Description  : IBN Demo ALU Message
Template     : 1 - Javascript-url with subId and optional Http-Url-Param
Script URL   : http://1.1.1.1/In-Browser-Notification/script.js
Admin Status : Up
AQP Ref      : Yes
-------------------------------------------------------------------------
                                  Notified        Notification Selection
                                                    Criteria Not Matched
-------------------------------------------------------------------------
1:1                                      3                             0
1:2                                      2                             0
1:3                                      0                             0
1:4                                      0                             0
1:5                                      0                             0
-------------------------------------------------------------------------
Total                                    5                             0
-------------------------------------------------------------------------
===============================================================================
http-notification
Syntax
http-notification http-notification-name summary
Context
show>app-assure>group
Description
This command displays information about the configured http-notification policy with associated raw statistics summed over all partitions.
Parameters
http-notification-name
Displays the name of the http-notification policy.
Output
A:Dut-D#  show application-assurance group 1 http-notification "in-browser-notifica
tion" summary 
===============================================================================
Application Assurance Group 1 HTTP Notification "in-browser-notification"
===============================================================================
Description  : IBN Demo ALU Message
Template     : 1 - Javascript-url with subId and optional Http-Url-Param
Script URL   : http://1.1.1.1/In-Browser-Notification/script.js
Admin Status : Up
AQP Ref      : Yes
 
-------------------------------------------------------------------------
                                  Notified        Notification Selection
                                                    Criteria Not Matched
-------------------------------------------------------------------------
Total                                    5                             0
-------------------------------------------------------------------------
===============================================================================
 
partition
Syntax
partition summary
Context
show>app-assure>group
Description
This command displays partition information.
Parameters
summary
Displays partition summary information.
policer
Syntax
policer
policer policer-name [detail]
policer summary
Context
show>app-assure>group
Description
This command displays application-assurance policer information.
Parameters
policer-name
Displays information about the specified policer.
summary
Displays summarized information about policers on this node.
Sample Output
show application-assurance group 1 policer <policer-name> detail                                          
===============================================================================
Policer Instance "1m-dwn"
===============================================================================
Description     : (Not Specified)
Type            : dual-bucket-bandwidth
Granularity     : subscriber
Adaptation Rule : pir closest cir closest
 
Active tod-override : none
 
PIR : max              Oper PIR : max
CIR : 0 kbps           Oper CIR : 0 kbps
MBS : 20000 KB         Oper MBS : 20000 KB
CBS : 0 KB             Oper CBS : 0 KB
 
No. of tod-overrides : 2
-------------------------------------------------------------------------------
Time of Day Override Instance 10
-------------------------------------------------------------------------------
Description : (Not Specified)
Admin State : in-service
 
Occurrence  : daily (monday tuesday wednesday thursday friday)
Start time  : 19:00
End time    : 22:00
 
PIR         : max
CIR         : 0 kbps
MBS         : 10000 KB
CBS         : 0 KB
-------------------------------------------------------------------------------
Time of Day Override Instance 20
-------------------------------------------------------------------------------
Description : (Not Specified)
Admin State : in-service
 
Occurrence  : daily (sunday saturday)
Start time  : 19:00
End time    : 22:00
 
PIR         : max
CIR         : 0 kbps
MBS         : 5000 KB
CBS         : 0 KB
===============================================================================
policy
Syntax
policy
Context
show>app-assure>group
Description
This command enables the context to display application-assurance policy configuration information.
http-error-redirect
Syntax
http-error-redirect redirect-name
Context
show>app-assure
show>app-assure>group
Description
This command enables the context to display http-error-redirect static definitions.
Sample Output
*A:cses-E11>show application-assurance group 1 http-error-redirect <redirect-name>
===============================================================================
Application-Assurance Group 1 http-error-redirect <redirect-name>
===============================================================================
description    : <description-string>
template       : <template-id>
               : text description of template
participant-id : <string>
http-host      : <http-host-name>
error code     : <http-error-code>    custom-msg-size : <msg size>
admin status   : Up
-------------------------------------------------------------------------------
Grp:Part  Error     Redirects    Redirects Not Sent
          Code      Sent         > Custom     Out of		File    Error
                    	         size	  Resource	type
-------------------------------------------------------------------------------
1:1       404	     1250          52            10           1	0
1:56789   404	     2000          952           81           0	1
-------------------------------------------------------------------------------
Total               3250      	1004          91           1     	1
----------------------------------------------------------------
================================================================
*A:cses-E11>
http-redirect
Syntax
http-redirect redirect-name
Context
show>app-assure>group
Description
This command displays application assurance http-redirect statistics and status information.
Parameters
redirect-name
Specifies the name of the http-redirect policy.
Output
The following table describes the show command output fields:
 
Sample Output
*A:7750# show application-assurance group 1 http-redirect "redirect-portal" 
 
===============================================================================
Application Assurance Group 1 HTTP Redirect redirect-portal
===============================================================================
Description        : (Not Specified)
Template           : 5
                   : Redirect supporting macro substitution using HTTP 302
Redirect URL       : http://172.16.70.100/Redirect/redirect-portal.
                     html?RequestedURL=$URL
Captive Redirect   : Yes
    VLAN ID        : 20
Admin Status       : Up
AQP Ref            : Yes
 
-------------------------------------------------------------------------------
Summary Statistics
-------------------------------------------------------------------------------
Grp:Part             Redirects           Client Resets               Redirects
                          Sent                    Sent                Not Sent
-------------------------------------------------------------------------------
1:1                          0                       0                       0
1:2                          0                       0                       0
1:3                          0                       0                       0
-------------------------------------------------------------------------------
Total                        0                       0                       0
-------------------------------------------------------------------------------
===============================================================================
 
error-codes
Syntax
error-codes
Context
show>app-assure>http-redirect
Description
This command displays http-error-redirect error-codes.
Sample Output
*A:cses-E11>show application-assurance http-error-redirect error-codes
===============================================================================
Application-Assurance http-error-redirect error-codes
===============================================================================
Code    Description                                  Default custom-msg-size
-------------------------------------------------------------------------------
404     Not found                                    1024
===============================================================================
*A:cses-E11>
template
Syntax
template
Context
show>app-assure>http-redirect
Description
This command displays http-error-redirect template information.
Sample Output
*A:cses-E11>show application-assurance http-error-redirect template
===============================================================================
Application-Assurance http-error-redirect templates
===============================================================================
ID      Description
-------------------------------------------------------------------------------
1       Template suited for Barefruit landing server.  Includes participant-id.
2       Template suited for Xerocole landing server.
===============================================================================
*A:cses-E11>
protocol
Syntax
protocol [protocol-name]
protocol [protocol-name] detail
Context
show>app-assure
Description
This command displays application-assurance policy protocols loaded from the isa-aa.tim file.
Parameters
protocol-name
Displays all protocols from the isa-aa.tim file.
detail
Displays detailed information about the specified protocol name.
Sample Output
A:ALU-ABC>show>app-assure# protocol 
===============================================================================
Application Assurance Protocols
===============================================================================
                        Protocol : Description
-------------------------------------------------------------------------------
                       aim_oscar : America Online Oscar Instant Messaging.
             aim_oscar_file_xfer : America Online Oscar File Transfer.
           aim_oscar_video_voice : America Online Oscar Video and Voice
                                   Traffic.
                         aim_toc : America Online Talk to Oscar Instant
                                   Messaging.
                      bittorrent : BitTorrent peer to peer protocol.
...
A:ALU-ABC>show>app-assure# 
 
 
A:ALU-ABC>show>app-assure# protocol tftp 
===============================================================================
Application Assurance Protocols
===============================================================================
                        Protocol : Description
-------------------------------------------------------------------------------
                            tftp : IETF RFC 1350: Trivial File Transfer
                                   Protocol.
===============================================================================
A:ALU-ABC>show>app-assure# 
radius-accounting-policy
Syntax
radius-accounting-policy [rad-acct-plcy-name]
radius-accounting-policy rad-acct-plcy-name associations
radius-accounting-policy rad-acct-plcy-name statistics
Context
show>app-assure
Description
This command displays RADIUS accounting policy information.
Parameters
rad-acct-plcy-name
Specifies the RADIUS accounting policy.
associations
Specifies to show what contexts are associated with this policy.
statistics
Specifies to show statistics related to this policy.
version
Syntax
version
Context
show>app-assure
Description
This command displays the versions of the isa-aa.tim used by the CPM and the AA ISAs.
Sample Output
A:ALU>show>app-assure# version 
===============================================================================
Versions of isa-aa.tim in use
===============================================================================
CPM           : TiMOS-M-7.0.R4
1/1           : TiMOS-I-7.0.R1
2/1           : TiMOS-I-7.0.R1
3/2           : TiMOS-I-7.0.R1
===============================================================================
A:ALU>show>app-assure# 
mda
Syntax
mda [slot [/mda]] [detail]
Context
show
Description
This command displays MDA information.
If no command line options are specified, a summary output of all MDAs is displayed in table format.
Parameters
slot
The slot number for which to display MDA information.
mda
The MDA number in the slot for which to display MDA information.
detail
Displays detailed MDA information.
Output
MDA Output
The following table describes MDA output fields.
Sample Output
show mda 
========================================================================
MDA Summary
========================================================================
Slot  Mda   Provisioned Type                            Admin     Operational
                Equipped Type (if different)            State     State
-------------------------------------------------------------------------------
2     1     m20-1gb-xp-sfp                              up        up
      2     isa-aa                                      up        up/active
                isa-ms                                                
========================================================================
 
aa-sub-using
Syntax
aa-sub-using
aa-sub-using app-profile app-profile-name
Context
show>service
Description
This command displays application subscriber information.
Parameters
app-profile-name
Specifies the application profile name.
sap-using app-profile
Syntax
sap-using app-profile app-profile-name
Context
show>service
Description
This command displays information about SAPs using the specified application profile.
Parameters
app-profile-name
Specifies an existing application profile name created in the config>app-assure>group>policy context.
Sample Output
*A:ALA-48# show service sap-using app-profile test
===============================================================================
Service Access Point Using Application Profile 'test'
===============================================================================
PortId                          SvcId      Ing.  Ing.    Egr.  Egr.   Adm  Opr
                                           QoS   Fltr    QoS   Fltr
-------------------------------------------------------------------------------
1/1/18:0                        89         1     none    1     none   Up   Down
-------------------------------------------------------------------------------
Number of SAPs : 1
-------------------------------------------------------------------------------
===============================================================================
*A:ALA-48# 
 
sap-using aarp
Syntax
sap-using aarp aarp-id
Context
show>service
Description
This command displays SAP information for a specific AARP ID.
Parameters
aarp-id
Specifies the AARP ID.
Values
sap-using transit-policy ip
Syntax
sap-using transit-policy ip ip-policy-id
Context
show>service
Description
This command displays SAP information for a specific transit-policy.
Parameters
ip-policy-id
Specifies the transit IP policy.
Values
sap-using transit-policy
Syntax
sap-using transit-policy prefix transit-prefix-policy
Context
show>service
Description
This command displays SAP information for a specific transit prefix policy.
Parameters
transit-prefix-policy
Specifies an integer that identifies the transit prefix policy.
Values
sdp-using aarp
Syntax
sdp-using aarp aarp-id
Context
show>service
Description
This command displays SDP information for a specific AARP instance ID.
Parameters
aarp-id
Specifies the AARP instance ID.
Values
sdp-using transit-policy ip
Syntax
sdp-using transit-policy ip transit-ip-policy
sdp-using transit-policy prefix transit-prefix-policy
Context
show>service
Description
This command displays SDP information for an IP transit IP policy or a transit prefix policy.
Parameters
ip ip-policy-id
Specifies an transit IP policy ID.
Values
prefix transit-prefix-policy
Specifies an transit prefix policy ID.
Values
sdp-using transit-policy
Syntax
transit-policy prefix transit-prefix-policy
Context
show>service
Description
This command displays the spoke-sdp associated to a transit prefix policy.
Parameters
transit-prefix-policy
Specifies an integer that identifies the transit prefix policy.
Values
sdp-using app-profile
Syntax
sdp-using app-profile app-profile-name
Context
show>service
Description
This command displays the SDP and associated services diverted to Application Assurance using a specific app profile name.
subscriber-using app-profile
Syntax
subscriber-using app-profile app-profile-name
Context
show>service
Description
This command displays the subscribers and associated services diverted to Application Assurance using a specific app profile name.
 
Tools Commands
aarp
Syntax
aarp aarpId event-history [clear]
Context
tools>dump>application-assurance
Description
This command dumps application-assurance AARP information for a specified instance.
Parameters
aarpId
Specifies the AARP ID.
Values
event-history
Dumps historical information for the instance.
clear
Specifies to clear the event hisotry after reading.
group
Syntax
group aa-group-id
Context
tools>dump>application-assurance
Description
This command dumps application-assurance information within a group.
Parameters
Values
group
Syntax
group aa-group-id[:partition-id]
Context
tools>dump>application-assurance
Description
This command dumps application-assurance information within a group/partition.
Parameters
Values
aa-sub
Syntax
aa-sub dsm mac mac-address [snapshot]
aa-sub esm sub-ident-string
aa-sub transit transit-aasub-name
Context
tools>dump>app-assure>group
Description
This command displays AA subscriber information for a specific ISA.
Parameters
mac-address
Specifies the MAC address in xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx format.
snapshot
Displays snapshot statistics.
sub-ident-string
Specifies the AA subscriber identifier string; a maximum of 32 characters.
transit-aasub-name
Specifies the AA transit subscriber name; a maximum of 32 characters.
app-group
Syntax
app-group [app-group-name] count [detail]
Context
tools>dump>app-assure>group
Description
This command displays per-subscriber per-app-group statistics.
application
Syntax
application [application-name] count [detail]
Context
tools>dump>app-assure>group
Description
This command displays per-subscriber per-application statistics.
charging-group
Syntax
charging-group [charging-group-name] count [detail]
Context
tools>dump>app-assure>group
Description
This command displays per-subscriber per-charging-group statistics.
summary
Syntax
summary
Context
tools>dump>app-assure>group
Description
This command displays subscriber summary information.
aa-sub-list
Syntax
aa-sub-list [filter-by-type sub-type] [isa mda-id]
aa-sub-list summary
Context
tools>dump>app-assure>group
Description
This command displays the AA subscriber list for the specified ISA.
aa-sub-search
Syntax
aa-sub-search top {bytes|packets|flows} [direction {from-sub|to-sub|both}] max-count max-count]
Context
tools>dump>app-assure>group
Description
This command displays application-assurance aa-sub information.
Parameters
search-type
Specifies the type of search.
Values
granularity
Specifies the granulatity of the search.
Values
direction direction
Specifies the network/subscriber direction.
Values
max-count max-count
Specifies the maximum flows to display.
Values
dns-ip-cache
Syntax
dns-ip-cache isa mda-id [url file-url]
Context
tools>dump>app-assure>group
Description
This command displays the list of IP addresses stored in a DNS IP cache.
Parameters
isa mda-id
Specifies the DNS IP cache for a particular ISA-AA card.
url file-url
Specifies the URL for the file to direct the search output to. The file may be local or remote.
Values
remote-url [{ftp://|tftp://}<login>:<pswd>@<remote-locn>/][<file-path>]
255 chars max
directory length 99 chars max each
remote-locn [ <hostname> | <ipv4-address> | <ipv6-address> ]
ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link
local addresses
cflash-id flash slot ID
Output
Command Output
The following table describes the command output fields:
 
Sample Output
*A:7750# tools dump application-assurance group 1 dns-ip-cache "Default DNS IP Cache" isa 3/2
=====================================================
Application-Assurance dns-ip-cache "Default DNS IP Cache"
Current Time: "01/21/2015 16:44:00" (UTC)
group: 1
isa: 3/2
admin state: no shutdown
max-entries: 150
=====================================================
ip-address creationTime(UTC) lastUpdated(sec) numDNSResponses lastMatchTime(UTC) numTimesMatched
2600:5:3d40:3::3fa8:3d59 "01/21/2015 16:42:49" 71 5 "01/21/2015 16:42:49" 0
2600:5:3d40:3::3fa8:3d0b "01/21/2015 16:42:49" 71 1 "01/21/2015 16:42:49" 0
2600:5:3d40:3::3fa8:3d2b "01/21/2015 16:42:49" 71 1 "01/21/2015 16:42:49" 0
157.238.74.203 "01/21/2015 16:42:36" 84 67 "01/21/2015 16:42:36" 0
207.152.124.91 "01/21/2015 16:42:36" 84 15 "01/21/2015 16:42:36" 0
207.152.124.97 "01/21/2015 16:42:36" 84 15 "01/21/2015 16:42:36" 0
77.67.86.136 "01/21/2015 16:42:36" 84 5 "01/21/2015 16:42:36" 0
157.238.74.176 "01/21/2015 16:42:36" 84 67 "01/21/2015 16:42:36" 0
77.67.86.99 "01/21/2015 16:42:36" 84 11 "01/21/2015 16:42:36" 0
event-log
Syntax
event-log event-log-name isa mda-id
event-log event-log-name [url file-url] isa mda-id
Context
tools>dump>app-assure>group
Description
This command displays application-assurance event-log information.
flow-record-search
Syntax
flow-record-search aa-sub {esm sub-ident-string | sap sap-id | spoke-sdp sdp-id:vc-id | transit transit-aasub-name | mobile {imsi imsi-msisdn | msisdn imsi-msisdn | imei imei} apn apn-name | dsm mac mac-address} [protocol protocol-name] [application app-name] [app-group app-group-name] [flow-status flow-status] [start-flowid start-flowid] [classified classified] [server-ip ip-address] [server-port port-num] [client-ip ip-address] [bytes-tx kbytes] [flow-duration minutes] [max-count max-count] [search-type search-type] [url file-url]
flow-record-search isa mda-id [protocol protocol-name] [application app-name] [app-group app-group-name] [flow-status flow-status] [start-flowid start-flowid] [classified classified] [server-ip ip-address] [server-port port-num] [client-ip ip-address] [bytes-tx kbytes] [flow-duration minutes] [max-count max-count] [search-type search-type] [url file-url]
Context
tools>dump>app-assure>group
Description
This command dumps application-assurance flow-records matching the specified criteria for a specific AA subscriber.
Parameters
application app-name
Displays flows for the specified application name.
app-group app-group-name
Displays flows for the specified application group.
bytes-tx kbytes
Display flows with the specified minimum kilobytes.
Values
classified classified
Specifies the starting flow ID.
Values
client-ip ip-address
Display flows with the specified client IP address.
Values
dsm mac mac-address
 
esm sub-ident-string
Displays flows for the specified subscriber.
flow-duration minutes
Display flows with the specified minimum duration in minutes.
Values
flow-status flow-status
Displays only flows that are active or closed.
Values
max-count max-count
Specifies the maximum count of flows to display.
Values
protocol protocol-name
Displays flows for the specified protocol.
sap sap-id
Displays flows for the specified SAP.
search-type search-type
Specifies the level of detail displayed for flows that match the search criteria.
Values
server-ip ip-address
Display flows with the specified server IP address.
Values
server-port port-num
Display flows with the specified server port number.
Values
spoke-sdp sdp-id:vc-id
Displays flows for the specified spoke SDP.
start-flowid start-flowid
Specifies the starting flow ID.
Values
transit transit-aasub-name
Displays flows for the specified transit subscriber.
url file-url
Specifies the URL for the file to direct the search output to. The file may be local or remote.
Values
remote-url [{ftp://|tftp://}<login>:<pswd>@<remote-locn>/][<file-path>]
255 chars max
directory length 99 chars max each
remote-locn [ <hostname> | <ipv4-address> | <ipv6-address> ]
ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link
local addresses
cflash-id flash slot ID
load-balance
Syntax
load-balance [service service-id]
Context
tools>perform>app-assure>group
Description
This command rebalances AA subscribers between ISAs within a group, in case imbalance occurs such as with the addition of new cards.
Parameters
service service-id
Specifies the service
Values
http-host-recorder detail
Syntax
http-host-recorder detail [isa mda-id] url file-url
Context
tools>dump>app-assure>group
Description
This command saves the http host values recorded by the tool into a file. The http-host-recorder is configured using debug commands.
Parameters
isa mda-id
Specifies the AA ISA.
Values
url file-url
Specifies the URL for the file to direct the http-host-recorder output to.
Values
local-url: <cflash-id>/][<file-path>]
200 chars max, including cflash-id
directory length 99 chars max each
remote-url: [{ftp://|tftp://}<login>:<pswd>@<remote-locn>/][<file-path>]
255 chars max
directory length 99 chars max each
remote-locn : <hostname> | <ipv4-address> | <ipv6-address> ]
ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x - [0..FFFF]H
d - [0..255]D
interface - 32 chars max, for link local addresses
cflash-id flash slot ID
http-host-recorder status
Syntax
http-host-recorder status [isa mda-id]
Context
tools>dump>app-assure>group
Description
This command displays the current status of the http-host-recorder with current-time, start-time, stop-time, sample-rates, filters, buffer as well as number of bytes and flows recorded for the specified AA ISA. The http-host-recorder is configured using debug commands.
Parameters
isa mda-id
Specifies the AA ISA
Values
http-host-recorder top
Syntax
http-host-recorder top {bytes|flows} [max-count {1..25}] [isa mda-id]
Context
tools>dump>app-assure>group
Description
This command configures dump application-assurance http-host-recorder information.
Parameters
granularity
Specifies if the output is sorted by bytes or flows.
Values
max-count max-count
Specifies the maximum count of flows to display.
Values
isa mda-id
Specifies the AA ISA
Values
http-host-recorder granularity
Syntax
http-host-recorder top granularity [max-count max-count] [isa mda-id]
Context
tools>dump>app-assure>group
Description
This command displays by bytes or flows top http-host recorded by the tool on a particular AA ISA.
Parameters
granularity
Specifies if the output is sorted by bytes or flows.
Values
max-count count-value
Specifies the maximum number of values to display.
Values
isa mda-id
Specifies the AA ISA
Values
policer
Syntax
policer policer-name day day time time-of-day
Context
tools>dump>app-assure>group
Description
This command displays rates for the policer for a specific day and time.
Parameters
policer-name
Specifies an existing poicer name up to 256 characters in length.
day day
Specifies a day to display policer rates.
Values
time time-of-day
Specifies a time of day (in hours and minutes )to display policer rates.
Values
port-recorder detail
Syntax
port-recorder detail [flow-count flows] [byte-count kbytes] [isa mda-id] url file-url
Context
tools>dump>app-assure>group
Description
This command saves the port recorded by the tool into a file. The port-recorder is configured using debug commands.
Parameters
flow-count flows
Match ports with flow count greater than the specified value.
Values
bytes-count kilobytes
Match ports with bytes count greater than the specified value.
Values
isa mda-id
Specifies the AA ISA
Values
url file-url
Specifies the URL for the file to direct the port-recorder output to.
Values
port-recorder status
Syntax
port-recorder status [isa mda-id]
Context
tools>dump>app-assure>group
Description
This command displays the current status of the port-recorder with current-time, start-time, stop-time, sample-rates as well as number of bytes and flows for UDP and TCP traffic on the specified AA ISA card. The port-recorder is configured using debug commands.
Parameters
isa mda-id
Specifies the AA ISA
Values
port-recorder top
Syntax
port-recorder top granularity [max-count max-count] [isa mda-id]
Context
tools>dump>app-assure>group
Description
This command displays by bytes or flows the top ports recorded by the tool on a particular AA ISA.
Parameters
granularity
Specifies if the output is sorted by bytes or flows.
Values
max-count count-value
Specifies the maximum number of values to display.
Values
isa mda-id
Specifies the AA ISA
Values
traffic-capture
Syntax
traffic-capture detail url file-url
traffic-capture status
Context
tools>dump>app-assure>group
Description
This command displays application-assurance traffic-capture information.
seen-ip
Syntax
seen-ip transit-ip-policy ip-policy-id
seen-ip transit-ip-policy ip-policy-id clear
Context
tools>dump>app-assure>group
Description
This command dumps application-assurance seen-ip information for a specified transit-ip policy.
Parameters
transit-ip-policy ip-policy-id
An integer that identifies a transit IP profile entry.
Values
clear
Clears the seen IP information after reading.
aarp
Syntax
aarp aarpId force-evaluate
Context
tools>perform>app-assure
Description
This command performs Application Assurance Redundancy Protocol instance operations.
Parameters
aarpId
Specifies an integer that identifies an AARP instance
Values
force-evaluate
Forces a re-evaluation of the preferred AARP instance.
group
Syntax
group aa-group-id load-balance [service service-id]
Context
tools>perform>app-assure
Description
This command performs application assurance group operations.
Parameters
aa-group-id
Specifies the application assurance group ID.
Values
load-balance
Load balances subscribers within the group.
service service-id
Load balances the specified service.
Values
 
Clear Commands
group
Syntax
group aa-group-id cflowd
group aa-group-id event-log
group aa-group-id statistics
group aa-group-id status
Context
clear>app-assure
Description
This command clears application assurance group statistics or status.
Parameters
aa-group-id
Clears data for the specified AA ISA group.
cflowd
Clears application assurance cflowd statistics.
event-log
Clears application assurance event log.
statistics
Clears application assurance system and subscriber statistics.
status
Clears application assurance status statistics.
radius-accounting-policy
Syntax
radius-accounting-policy rad-acct-plcy-name [server server-index] statistics
Context
clear>app-assure
Description
This command clears application assurance RADIUS accounting statistics for the specified policy.
Parameters
policy-name
The name of the policy. The string is case sensitive and limited to 32 ASCII 7-bit printable characters with no spaces.
server-index
The index for the RADIUS server.
Values
 
 
 
Debug Commands
group
Syntax
group aa-group-id[:partition-id]
Context
debug>app-assure
Description
This command configures application-assurance within a group/partition debugging.
Parameters
aa-group-id[:partition-id]
Specifies the existing application assurance group and partition id.
Values
traffic-capture
Syntax
[no] traffic-capture
Context
debug>app-assure>group
Description
This command configures debugging for traffic capture.
match
Syntax
[no] match
Context
debug>app-assure>group>traffic-capture
Description
This command configures debugging for traffic match criteria.
application
Syntax
application {eq | neq} application-name
no application
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging on an application.
client-ip
Syntax
client-ip {eq | neq} ip-address
no client-ip
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging of a client IP.
client-port
Syntax
client-port {eq | neq} port-num
no client-port
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging of a client port.
dst-ip
Syntax
dst-ip {eq | neq} ip-address
no dst-ip
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging on a destination IP address.
dst-port
Syntax
dst-port {eq | neq} port-num
no dst-port
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging on a destination port.
ip-addr1
Syntax
ip-addr1 {eq | neq} ip-address
no ip-addr1
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging on IP address 1.
ip-addr2
Syntax
ip-addr2 {eq | neq} ip-address
no ip-addr2
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging on IP address 2.
ip-protocol-num
Syntax
ip-protocol-num {eq | neq} protocol-id
no ip-protocol-num
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging on an IP protocol number.
port1
Syntax
port1 {eq | neq} port-num
no port1
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging on port 1.
port2
Syntax
port2 {eq | neq} port-num
no port2
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging on port 2.
server-ip
Syntax
server-ip {eq | neq} ip-address
no server-ip
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging on a servicer IP address.
server-port
Syntax
server-port {eq | neq} port-num
no server-port
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging on a server port.
src-ip
Syntax
src-ip {eq | neq} ip-address
no src-ip
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging on a source IP address.
src-port
Syntax
src-port {eq | neq} port-num
no src-port
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging on a source port.
mirror-source
Syntax
[no] mirror-source service-id
Context
debug>app-assure>group>traffic-capture>match
Description
This command configures debugging on a mirror source.
record
Syntax
record
Context
debug>app-assure>group>traffic-capture
Description
This command configures traffic recording options.
limit
Syntax
limit {all-packet-matches | first-session-match}
Context
debug>app-assure>group>traffic-capture>record
Description
This command records limit conditions.
Parameters
all-packet-matches
Records all the packets matching the condition.
first-session-match
Records only the first session matching the condition.
start
Syntax
start {immediate | on-new-session}
Context
debug>app-assure>group>traffic-capture>record
Description
This command records limit conditions.
Parameters
immediate
Start recording immediately for new or existing flows or sessions.
on-new-session
Only start recording record for new flows or sessions.
shutdown
Syntax
[no] shutdown
Context
debug>app-assur>group>traffic-capture
Description
This command administratively disables traffic capture.
isa-aa-group
Syntax
isa-aa-group aa-group-id {all | unknown}
no isa-aa-group aa-group-id
Context
debug>mirror-source
Description
This command configures AA ISAgroup as a mirror source for this mirror service. Traffic is mirrored after AA processing takes place on AA ISAs of the group, therefore, any packets dropped as part of that AA processing are not mirrored.
Parameters
all
Specifies that all traffic after AA processing will be mirrored.
unknown
Specifies that all traffic during the identification phase (may match policy entry or entries that have mirror action configured) and traffic that had been identified as unknown_tcp or unknown_udp after AA processing will be mirrored.
 
persistence
Syntax
persistence [persistence-client]
no persistence
Context
debug>system
Description
This command displays persistence debug information.
Parameters
persistence-client
Use the application-assurance keyword to display persistence debug information.
Values
http-host-recorder
Syntax
[no] http-host-recorder
Context
debug>app-assur>group
Description
This command enables the http-host-recorder feature on a particular group:partition.
The no form of the command disables the http-host-recorder feature.
filter
Syntax
filter
Context
debug>app-assur>group>http-host-recorder
Description
This command configures recorder filter settings.This command specifies the filtering parameter for the http-host-recorder feature.
default-filter-action
Syntax
default-filter-action default-action
Context
debug>app-assur>group>http-host-recorder>filter
Description
This command configures the recorder filter default action to either record or no-record. This parameter applies to http-host values not matching any expressions defined in the filter context.
Parameters
default-action
Specifies the default action.
Values
expression
Syntax
expression expr-index expr-type eq expr-string {record|no-record}
no expression expr-index
Context
debug>app-assur>group>http-host-recorder>filter
Description
This command configures the recorder filter expressions.
Parameters
expr-index
Specifies the expression index vaue.
Values
expr-type
Specifies the expression type.
Values
expr-string
Specifies the HTTP host filter expression string.
Values
record
Syntax
record {all-hosts|http-host-app-filter-candidates}
Context
debug>app-assur>group>http-host-recorder>filter
Description
This command configures which http-host are selected for the http-host-recorder. It is either any http-host values going through the AA ISA or the http-host corresponding to flows not matching a string based app-filter. Note that for the feature to work it is required to configure at least one app-filter to catch the HTTP protocol signature.
Parameters
all-hosts|http-host-app-filter-candidates
Specifies which hosts the recorder will record
Values
Default
rate
Syntax
rate sample-rate
no rate
Context
debug>application-assurance>group>http-host-recorder
debug>application-assurance>group>port-recorder
Description
This command configures the sampling rate for the recorded http host, a sampling rate of 10 will sample one out of 10 http-host.
Values
Default
Sample Output
The following configuration records http-host entries ending with “.com” as a result of the expression filter configuration. It will not record any other HTTP host values since the default-filter-action set to no-record. The http-host entries analyzed by the recorder in the first place are http-host-app-filter-candidates.
 
7750# show debug                                             
debug
    application-assurance
        group 1:1
            http-host-recorder
                filter
                    default-filter-action no-record
                    expression 1 http-host eq "*.com$" record
                    record http-host-app-filter-candidates
                exit
                rate 100
                no shutdown
            exit
        exit
    exit
exit
 
shutdown
Syntax
[no] shutdown
Context
debug>application-assurance>group>http-host-recorder
debug>application-assurance>group>port-recorder
Description
This commands allows to stop or start the http-host-recorder. To reset the recorded values execute shutdown followed by no shutdown.
port-recorder
Syntax
[no] port-recorder
Context
debug>application-assurance>group
Description
This commands allows to stop or start the http-host-recorder. To reset the recorded values execute shutdown followed by no shutdown.
application
Syntax
[no] application application-name
Context
debug>application-assurance>group>port-recorder
Description
This commands specifies the applications used as input by the port-recorder. Note that applications responsible for unknown or unidentified traffic are meant to be used by this tool.
Sample Output
The follwoing configuration records TCP and UDP port numbers for the application “Unidentified TCP”.
 
7750# show debug 
debug
    application-assurance
        group 1:1
            port-recorder
                application "Unidentified TCP"
                rate 100
                no shutdown
            exit
        exit
    exit
exit