For feedback and comments:
documentation.feedback@alcatel-lucent.com

Table of Contents Previous Next PDF


 
TMS-Related Show Commands
tms
Syntax
tms routes [tms-interface interface-name] [family] [active|inactive]
Context
show>router
Description
This command displays TMS route information.
Parameters
tms-interface interface-name
Specifies the interface name, up to 32 chars in length.
family
Specifies an address family: ipv4|ipv6
active
<<TBD>>
inactive
<<TBD>>
Sample Output
*A:Dut-C# show router 1 tms routes 
===============================================================================
TMS Routes (IPv4)
===============================================================================
Status    Network                                      Next Hop[Interface Name]
-------------------------------------------------------------------------------
Active    100.0.0.1/32                                 mda-2-1
-------------------------------------------------------------------------------
No. of Routes: 1
=============================================================================== 
interface
Syntax
interface tms-interface-name [detail]
Context
show>router
Description
This command displays information about the TMS interface.
Parameters
tms-interface-name
Specifies the interface name, up to 32 chars in length.
detail
Specifies displaying of detailed information.
Sample Output
*A:Dut-C# show router 1 interface "mda-2-1" detail 
===============================================================================
Interface Table (Service: 1)
===============================================================================
-------------------------------------------------------------------------------
Interface
-------------------------------------------------------------------------------
If Name          : mda-2-1
Admin State      : Up                   Oper (v4/v6)      : Up/Down
Protocols        : None
IP Addr/mask     : 20.12.0.44/32        Address Type      : Primary
IGP Inhibit      : Disabled             Broadcast Address : Host-ones
HoldUp-Time      : 0                    Track Srrp Inst   : 0
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Description      : tms-2-1
If Index         : 3                    Virt. If Index    : 3
Last Oper Chg    : 09/14/2011 08:39:24  Global If Index   : 122
If Type          : TMS                  
Rx Pkts          : 13508                Rx Bytes          : 864512
Tx Pkts          : 13552                Tx Bytes          : 867328
Tx Discard Pkts  : 0                    
 
TMS Health Information
Status           : Up
Version          : Peakflow TMS 5.6 (build BHDF)
Mitigations      : 1
Status message   : (Unavailable)
===============================================================================
with
Rx Pkts/Rx Bytes: Offramped traffic counters
Tx Pkts/Tx Bytes: Onramped traffic counters
Tx Discard Pkts:  Discarded packets by TMS
It displays the #of pkts dropped while the  traffic is getting distributed to various 
packet engines for mitigation processing.
It doesn't account for the pkts dropped in HW level.
Status:  TMS status could be Up/Down
Version: TMS software version
Mitigations: Number of active mitigations on this TMS
Status message: Not applicable.  For future usage.
 
protocol
Syntax
protocol tms
Context
show>router>route-table
Description
This command displays general information about the TMS route table.
Sample Output
*A:Dut-C# show router route-table protocol tms 
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix[Flags]                            Type    Proto    Age         Pref
Next Hop[Interface Name]                                   Metric    
-------------------------------------------------------------------------------
100.0.0.1/32                                  Remote  TMS      00h23m07s   167
vprn1:mda-2-1                                                0
-------------------------------------------------------------------------------
No. of Routes: 1
Flags: L = LFA nexthop available    B = BGP backup route available
n = Number of times nexthop is repeated
===============================================================================
*A:Dut-C# 
route-table
Syntax
route-table summary
Context
show>router
Description
This command displays the router’s route table, in cluding the TMS routes.
Parameters
summary
Displays summary information.
Sample Output
*A:Dut-C# show router route-table summary 
===============================================================================
Route Table Summary (Router: Base)
===============================================================================
                                   Active                   Available
-------------------------------------------------------------------------------
Static                        5                        5
Direct                        12                       12
Host                          0                        11
BGP                           0                        0
BGP (Backup)                  0                        0
VPN Leak                      0                        0
OSPF                          0                        0
ISIS                          6                        6
ISIS (LFA)                    0                        0
RIP                           0                        0
LDP                           0                        0
Aggregate                     0                        0
Sub Mgmt                      0                        0
Managed                       0                        0
NAT                           0                        0
TMS                           1                        1
-------------------------------------------------------------------------------
Total                         24                       35
===============================================================================
NOTE: ISIS LFA routes and BGP Backup routes are not counted towards the total.
port
Syntax
port slot/mda/2 (offramp port)
port slot/mda/3 (onramp port)
Context
show
Description
This command display TMS offramp and onramp port information.
Parameters
slot/mda/2
<<TBD>>
slot/mda/3
<<TBD>>
offramp port
<<TBD>>
onramp port
<<TBD>>
Sample Output
*A:Dut-C# show port 2/1/2 
===============================================================================
ISA-TMS Port
===============================================================================
Description        : TMS
Port               : 2/1/2                      Admin State      : up
Last State Change  : 09/14/2011 07:03:49        Oper State       : up
 
Configured Mode    : network                    Net. Egr. Queue *: default
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
                                                        Input                 Output
-------------------------------------------------------------------------------
Unicast Packets                                    35365                    254
Multicast Packets                                      0                      0
Broadcast Packets                                      0                      0
Discards                                               0                      0
Unknown Proto Discards                                 0 
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors :                   0  Sngl Collisions  :                   0
FCS Errors       :                   0  Mult Collisions  :                   0
SQE Test Errors  :                   0  Late Collisions  :                   0
CSE              :                   0  Excess Collisns  :                   0
Too long Frames  :                   0  Int MAC Tx Errs  :                   0
Symbol Errors    :                   0  Int MAC Rx Errs  :                   0
===============================================================================
*A:Dut-C# 
 
 
*A:Dut-C# show port 2/1/3 
===============================================================================
ISA-TMS Port
===============================================================================
Description        : TMS
Port               : 2/1/3                      Admin State      : up
Last State Change  : 09/14/2011 07:03:49        Oper State       : up
 
Configured Mode    : network                    Net. Egr. Queue *: default
===============================================================================
* indicates that the corresponding row element may have been truncated.
===============================================================================
Port Statistics
===============================================================================
                                                        Input                 Output
-------------------------------------------------------------------------------
Unicast Packets                                        1                  35710
Multicast Packets                                      0                      0
Broadcast Packets                                      0                      0
Discards                                               0                      0
Unknown Proto Discards                                 0 
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors :                   0  Sngl Collisions  :                   0
FCS Errors       :                   0  Mult Collisions  :                   0
SQE Test Errors  :                   0  Late Collisions  :                   0
CSE              :                   0  Excess Collisns  :                   0
Too long Frames  :                   0  Int MAC Tx Errs  :                   0
Symbol Errors    :                   0  Int MAC Rx Errs  :                   0
===============================================================================
filter ip
Syntax
filter ip
Context
show>filter
Description
This command isplays IP filter information.
Sample Output
*A:Dut-C# show filter ip                                                              
=============================================================================== 
Configured IP Filters                                            Total:     0 
=============================================================================== 
Filter-Id   Scope     Applied Description 
------------------------------------------------------------------------------- 
No Matching Entries 
=============================================================================== 
System IP Filters                                                Total:     8 
=============================================================================== 
Filter-Id                     Description 
------------------------------------------------------------------------------- 
_tmnx_tms-egr-1/1-F           Egress TMS filter 
_tmnx_tms-egr-2/1-F           Egress TMS filter 
_tmnx_tms-egr-2/2-F           Egress TMS filter 
_tmnx_tms-egr-3/1-F           Egress TMS filter 
_tmnx_tms-ing-1/1-F           Ingress TMS filter 
_tmnx_tms-ing-2/2-F           Ingress TMS filter 
_tmnx_tms-ing-2/1-F           Ingress TMS filter 
_tmnx_tms-ing-3/1-F           Ingress TMS filter 
------------------------------------------------------------------------------- 
Num IP filters: 8 
=============================================================================== 
*A:Dut-C#
 
 
Clear Commands
interface
Syntax
interface tms-interface-name [statistics]
Context
clear>router
Description
This command clears TMS interface statistics or status.
Parameters
interface-name
Clears the interface name, up to 32 chars in length.
statistics
Clears application assurance system and subscriber statistics.
 
Debug Commands
tms
Syntax
tms tms-interface tms-interface-name [detail]
Context
debug>router
Description
This command enables or disables and configures debugging for Threat Management System information
Parameters
tms-interface interface-name
Specifies the interface name, up to 32 chars in length.
detail
Configures detailed debugging.