Installing ITM-CIT

- Purpose

Use this procedure to install the ITM-CIT software onto a new system.

NOTE: Please note that this installation procedure is only valid for the current ITM-CIT release. This procedure might change in future releases of ITM-CIT even though there is no update of the NE software.

- Required equipment

For the ITM-CIT, a personal computer is necessary which fulfils the following minimum requirements:

  • Pentium® processor with 450 MHz or higher

  • 128 MB RAM or higher

  • Keyboard

  • Mouse

  • 300 MB of free hard-disk drive space

  • CD-ROM drive

  • Display with 1024x768, 16 million colors recommended

  • RS-232 communication port (serial asynchronous port)

  • Microsoft® Windows® 2000 or Windows XP® operating system

  • ITM-CIT connector (F-interface) cable (one end RS-232 and the other end RJ-45 modular jack), CC848069795.

The performance can be enhanced by using a higher performance personal computer. Independent of the requirements listed above, the minimum requirements of the operating system must be fulfilled. A CD-ROM containing the ITM-CIT software must be available.

- Before you begin

Before installing the software, the software release number must be known.

The installation program cannot install system files or update shared files if they are in use by other programs. For this reason, the user must stop as many Windows applications as possible before starting with the installation procedures.

Installation procedure

Complete the following steps to install the ITM-CIT software on your PC:

 
1

On the Windows® desktop, click with the left button of the mouse on Start.

Result: The Start menu appears.

2

Click with the left button of the mouse on the Run item.

Result: The Run window appears.

3

Click on the Browse button.

Result: The Browse window appears.

4

Insert the CD-ROM containing the ITM-CIT application into the CD-ROM drive and click with the left button of the mouse on the CD-ROM item.

5

Select the required directory and click on the executable file SETUP.exe and then, click Open.

6

Click OK to run the executable file on the CD-ROM.

Result: The InstallShield Wizard window appears.

7

Click Next to continue with the installation of the ITM-CIT software.

Result: The ITM-CIT files are extracted. This will take a few minutes. Then, the Welcome window appears.

8

Click Next.

Result: The Software License Agreement window appears.

9

If you agree, click Yes.

Result: The Select Language window appears. Here, the language of the Online Help is defined.

10

If

then

you want to install ITM-CIT with default setting English (English Online Help)

click Next.

Result: The Select Components window appears.

you want to install a different language

run SETUP.exe again and select the required language (right now in english available only).

Result: The Select Components window appears.

11

Select the component(s) you wish to be installed. It is recommended to leave the default setting and install the ITM-CIT including the Online Help files.

Click Next to install the ITM-CIT software in the default directory (C:\..\ITM-CIT) or click on the Browse button to select or create a different directory for the ITM-CIT software.

Additionally, you can check the available disk space for all available drives by clicking on Disk Space... .Leave the window Available Disk Space by clicking OK or Cancel.

Important! Activating Disk Space... may change the default directory to another drive.

Result: The Provide password window appears.

12

It is optional to define a password. Fill in a password, if required and confirm it. Then, click Next.

Result: The Select Program Folder window appears.

13

Leave the default setting, select or create a folder in which the program icons will be installed. Click Next.

Result: The ITM-CIT is installed. This will take a few minutes. Then, the Restarting Windows window appears.

14

Choose one of the given options and click OK to finish the setup.

Important!

  • It is recommended to reboot the PC before starting up the ITM-CIT, but make sure to restart the computer only if other Windows® programs have been closed before.

  • The MIB Upload and Download (MUD) tool and the latest version of WinPcap is installed alongwith ITM-CIT. Certain applications do not support the latest WinPcap. For example, the older versions of the Fast Download Tool do not support the latest version of WinPcap. Therefore, replace the older version of the Fast Download Tool with the latest version available on the NE software CD-ROM.

End of steps