Installing the fast download application

- Overview

The “Fast download” application permits to download the current software in the equipment in about five minutes. The “Fast download” is realized from a PC connected to the Q-LAN interface of the 1643 AM/AMS unit.

The “Fast download” application is installed in the Windows environment using the program supplied. It is a simple process during which on-screen guidance is provided.

NOTE: Use always the Fast Download Tool that has been delivered with the system.

Procedure

Proceed as follows to install the “Fast download” application:

 
1

Insert the CD-ROM which includes the “Fastdownload.exe” file in the CD-ROM drive of the PC.

2

Select the Run... command from the Windows Start menu, type d:\fastdownload.exe (where d: is the CD-ROM drive indicator) and click OK.

Result: The screen of the WinZip Self-Extractor – FastDownload.exe is displayed.

3

Select the directory to which the files shall be extracted and press the Unzip button.

Result: The files will be extracted.

4

Select the Run... command from the Windows Start menu, type C:\TEMP\setup.exe (where C:\TEMP is the used directory) and click OK.

Result: The Fastdownload Installer dialog box appears. Follow the instructions and accept the license agreement.

5

Install, as requested, the “Fast Download Tool”. When the installation is complete, a message appears indicating that the installation has been successful.

6

Reboot the PC to allow for the tool to connect to the present Ethernet Adapters.

End of steps