Alcatel-Lucent 1665 DMX utilizes Pluggable Transmission Modules (PTMs), also known as small form-factor plug-ins (SFPs), transceivers on the LNW63, LNW64, LNW73/73C, LNW74, LNW87, LNW170, LNW705, and LNW910 circuit packs. To ensure proper optical performance, mechanical fit, compliance with EMC, and compliance with laser safety standards, the Alcatel-Lucent specified PTM transceivers listed in the table below must be used.
Only the Alcatel-Lucent specified PTM transceivers listed below are compatible with Alcatel-Lucent 1665 DMX software. If non-Alcatel-Lucent specified PTM transceivers are installed in Alcatel-Lucent 1665 DMX, the system will reject that transceiver, and that optical port will become inoperable (until approved parts are installed).
The table below lists the PTM transceivers that may be used in the LNW63, LNW64, LNW73/73C, LNW74, LNW87, LNW170, LNW705, and LNW910 circuit packs.
|
Apparatus Code |
Description |
Circuit pack |
|---|---|---|
|
100BASE-ZX-I1 |
Optical Fast Ethernet PTM, LC-type connectors (FE-15510SM), OSP hardened/Industrial (−40°C to 85°C). Specification: 100BASE-ZX optical Ethernet specification |
LNW74/87/170 |
|
100BASE-LX-I1 |
Optical Fast Ethernet PTM, LC-type connectors (FE-1310SM), OSP hardened/Industrial (−40°C to 85°C). Specification: 100BASE-LX optical Ethernet specification |
LNW74/87/170/910 |
|
100BASE-FX-I1 |
Optical Fast Ethernet PTM, LC-type connectors (FE-1310MM), OSP hardened/Industrial (−40°C to 85°C). Specification: 100BASE-FX optical Ethernet specification |
LNW74/87/170 |
|
GE-1X2XFC-SX-I1 (1000BASE-SX, 1Gbps and 2 Gbps Fibre-Channel) |
GbE short-reach, Multi-Mode PTM, supports Ethernet and Fibre-Channel traffic, LC-type connectors, OSP hardened/Industrial (−40°C to 85°C), (GbE/FC/2FC-850). Specification: 1000BASE-SX optical Ethernet/SAN specification |
LNW63/64/73/ 73C/87/170/705/910 |
|
GE-1X2XFC-LX-I1 (1000BASE-LX, 1Gbps and 2 Gbps Fibre-Channel/FICON) |
GbE long-reach, Single-Mode PTM, supports Ethernet, FICON, and Fibre-Channel traffic, LC-type connectors, OSP hardened/Industrial (−40°C to 85°C), (GbE/FC/2FC-1310) Specification: 1000BASE-LX optical Ethernet/SAN specification |
LNW63/64/73/ 73C/87/170/705/910 |
|
1000BASE-ZX-I1 (1000BASE-ZX, 1Gbps) |
GbE very long-reach, 1550 nm, Single-Mode PTM, supports Ethernet, LC-type connectors, and is OSP hardened/Industrial, (−40°C to 85°C), (GbE-1550). Specification: 1000BASE-ZX optical Ethernet specification |
LNW63/64/87/170/705/ 910 |
|
BASE-T-C1 FE and GbE (electrical- NOT OSP) |
Electrical PTM, provisionable to 100 or 1000 Mbps, Alcatel-Lucent Approved RJ-45 Cat 5-E cable, maximum span length of 100 meters. Specification: 100/1000BASE-T electrical Ethernet specification |
LNW63/64/87/170 |
|
ESCON-MM-I1 (ESCON) |
ESCON, Multi-Mode PTM, LC-type connectors (ESCON-1310), Specification: ESCON SAN transport specification (LNW73/73C) |
LNW73/73C |
|
SGEMEC1 |
SFP, 100/1000BASE-T Copper, OSP hardened/Industrial temperature, (−40°C to 85°C). Specification: 100/1000BASE-T electrical Ethernet specification |
LNW910 |
|
X10GMC2 |
XFP, 10GE LAN PHY, I-64.1, 10 km, 10GBASE-LR, 1310 nm, SM, OSP hardened/Industrial temperature, (−40°C to 85°C). Specification: 10GBASE-LR/ER/ZR Ethernet PTM specification |
LNW910 |
|
X10GMC4 |
XFP, 10GE LAN PHY, I-64.2b, 40 km, 10GBASE-ER, 1550 nm, SM, OSP hardened/Industrial temperature, (−40°C to 85°C). Specification: 10GBASE-LR/ER/ZR Ethernet PTM specification |
LNW910 |
|
X10GMC5 |
XFP, 10GE LAN PHY, P1L1-2D2 80 km, 10GBASE-ZR, 1550 nm, SM, extended temperature, (−5°C to 85°C). Specification: 10GBASE-LR/ER/ZR Ethernet PTM specification |
LNW910 |
| September 2013 | Copyright © 2013 Alcatel-Lucent. All rights reserved. |