This Applications and Planning Guide provides the following information for Alcatel-Lucent 1665 Data Multiplexer (Alcatel-Lucent 1665 DMX):
This document is issued to provide information about Release 9.1 features, including:
Change the initial default state of an external timing reference from Auto to IS
In TL1 cut-through, the last TID specified is remembered and used in all subsequent commands in which a TID is not specified.
Extra traffic on low-speed or high-speed OC-192 BLSRs when the mains are equipped with VLF packs
Optional OOS check for loopback on Ethernet, PDH and EC-1 signals
Ethernet loopbacks are allowed even when RCF or FEFI are active
The following table lists the documents included in the Alcatel-Lucent 1665 DMX documentation set.
Document number/Comcode |
Title |
---|---|
365-372-330 |
WaveStar® User Guide |
365-372-300R9.1 |
Alcatel-Lucent 1665 Data Multiplexer (DMX) Applications and Planning Guide |
365-372-301R9.1 |
Alcatel-Lucent 1665 Data Multiplexer (DMX) User Operations Guide |
365-372-302R9.1 |
Alcatel-Lucent 1665 Data Multiplexer (DMX) Alarm Messages and Trouble Clearing Guide |
365-372-304R9.1 |
Alcatel-Lucent 1665 Data Multiplexer (DMX) Installation Manual |
365-372-306R9.1 |
Alcatel-Lucent 1665 Data Multiplexer (DMX) TL1 Message Details |
ED8C871-10 |
Alcatel-Lucent 1665 Data Multiplexer (DMX) Engineering and Ordering Information |
ED8C871-20 |
Alcatel-Lucent 1665 Data Multiplexer (DMX) Interconnect Information |
109783647 |
Alcatel-Lucent 1665 Data Multiplexer (DMX) Release 9.1.0 Customer Release Notes (PDF) |
109783274 |
Alcatel-Lucent 1665 Data Multiplexer (DMX) Release 9.1.0 Customer Release Notes (CD-ROM) |
109783282 |
Alcatel-Lucent 1665 Data Multiplexer (DMX) Release 9.1.X Customer Documentation CD-ROM |
This Applications and Planning Guide is intended for network planners and engineers. However, it is also for anyone who needs specific information regarding the features, applications, operation, engineering, and ordering of Alcatel-Lucent 1665 DMX.
This guide is divided into ten chapters and an appendix. See the Contents section to locate specific information by chapter.
Bold typeface signifies emphasis.
Italic typeface denotes a particular product line or information product.
Bold courier typeface signifies a TL1 command.
Bold typeface signifies a GUI command.
For the remainder of this information product, Alcatel-Lucent 1665 DMX is used in place of Alcatel-Lucent 1665 Data Multiplexer in most cases.
For technical support, contact your local Alcatel-Lucent customer support team. See the Alcatel-Lucent Support web site for contact information.
To order Alcatel-Lucent documents, contact your local sales representative or use the Online Customer Support (OLCS) site.
To comment on this document, go to the Online Comment Form or e-mail your comments to the Comments Hotline.
November 2011 | Copyright © 2011 Alcatel-Lucent. All rights reserved. |