The low-speed LNW402 is a single-port OLIU that employs PTM pluggable optics to offer 1310 nm, 1550 nm, or DWDM optics with a 12 STS-1 VT fabric.
The LNW402 circuit pack and three of the supported OC-48 PTMs are approved for OSP deployments. You must install a PTM that is approved for industrial temperatures (OC48SR1-I1, OC48LR1-I1, OC48LR2-I1, CWDM [S2G7C47LI– S2G7C61LI]) to use the LNW402 in OSP environments. All of the DWDM PTMs are approved for commercial temperatures and are therefore only approved for Central Office environments.
For detailed system, transmitter, receiver, and link budget specifications, see OC-48 PTM optical specifications.
The table below lists Pluggable Transmission Modules (PTMs), also known as small form-factor plug-ins (SFPs), that may be used in the LNW402 circuit pack.
Alcatel-Lucent 1665 DMX utilizes Pluggable Transmission Module (PTM) optics on the LNW402 circuit pack. To ensure proper optical performance, mechanical fit, compliance with EMC, and compliance with laser safety standards, the Alcatel-Lucent specified PTM transceivers listed in the table below must be used.
Only the Alcatel-Lucent specified PTM transceivers listed below are compatible with Alcatel-Lucent 1665 DMX software. If non-Alcatel-Lucent specified PTM transceivers are installed in Alcatel-Lucent 1665 DMX, the system will reject that transceiver, and that optical port will become inoperable (until approved parts are installed).
|
Apparatus code |
Description |
|---|---|
|
OC48SR1-I1 |
OC-48 SR-1 SFP, 2 km, 1310 nm |
|
OC48LR1-I1 |
OC-48 LR-1 SFP, 40 km, 1310 nm |
|
OC48LR2-I1 |
OC-48 LR-2 SFP, 80 km, 1550 nm |
|
S2D23C6 |
OC-48/STM-16/OTU1 DWDM SFP, 96 km, 192.3 THz, 1558.983 nm |
|
S2D25C6 |
OC-48/STM-16/OTU1 DWDM SFP, 96 km, 1192.5 THz, 1557.363 nm |
|
S2D27C6 |
OC-48/STM-16/OTU1 DWDM SFP, 96 km, 192.7 THz, 1555.747 nm |
|
S2D31C6 |
OC-48/STM-16/OTU1 DWDM SFP, 96 km, 193.1 THz, 1552.524 nm |
|
S2D33C6 |
OC-48/STM-16/OTU1 DWDM SFP, 96 km, 193.3 THz, 1550.918 nm |
|
S2D35C6 |
OC-48/STM-16/OTU1 DWDM SFP, 96 km, 193.5 THz, 1549.315 nm |
|
S2D37C6 |
OC-48/STM-16/OTU1 DWDM SFP, 96 km, 193.7 THz, 1547.715 nm |
|
S2D45C6 |
OC-48/STM-16/OTU1 DWDM SFP, 96 km, 194.5 THz, 1541.349 nm |
|
S2D47C6 |
OC-48/STM-16/OTU1 DWDM SFP, 96 km, 194.7 THz, 1539.766 nm |
|
S2D49C6 |
OC-48/STM-16/OTU1 DWDM SFP, 96 km, 194.9 THz, 1538.186 nm |
|
S2D53C6 |
OC-48/STM-16/OTU1 DWDM SFP, 96 km, 195.3 THz, 1535.036 nm |
|
S2D55C6 |
OC-48/STM-16/OTU1 DWDM SFP, 96 km, 195.5 THz, 1533.465 nm |
|
S2D59C6 |
OC-48/STM-16/OTU1 DWDM SFP, 96 km, 195.9 THz, 1530.334 nm |
|
S2G7C47LI |
OC-48/STM-16 CWDM SFP, 80 km, 1471 nm |
|
S2G7C49LI |
OC-48/STM-16 CWDM SFP, 80 km, 1491 nm |
|
S2G7C51LI |
OC-48/STM-16 CWDM SFP, 80 km, 1511 nm |
|
S2G7C53LI |
OC-48/STM-16 CWDM SFP, 80 km, 1531 nm |
|
S2G7C55LI |
OC-48/STM-16 CWDM SFP, 80 km, 1551 nm |
|
S2G7C57LI |
OC-48/STM-16 CWDM SFP, 80 km, 1571 nm |
|
S2G7C59LI |
OC-48/STM-16 CWDM SFP, 80 km, 1591 nm |
|
S2G7C61LI |
OC-48/STM-16 CWDM SFP, 80 km, 1611 nm |
The following parameters are monitored on the OC-48 interfaces:
SONET line and path performance monitoring complies with the standards outlined in GR-253-CORE. For detailed PM parameter thresholds on the OC-48 interfaces, see Performance monitoring.
| November 2011 | Copyright © 2011 Alcatel-Lucent. All rights reserved. |