WDMX performance monitoring parameters

WDMX port TCA monitoring

TCA monitoring is supported on the LNW785 circuit packs (OCH ports and OTS port). The following table lists the monitored parameters when TCA monitoring is enabled.

Table 5-19: WDMX port TCA monitoring

Port	Parameter	Description
OTS	TOPRL	Total Optical Power Received Low Watermark
OTS	TOPRH	Total Optical Power Received High Watermark
OCH	OPTL	Optical Power Transmitted Low Watermark
OCH	OPTH	Optical Power Transmitted High Watermark
OTU2	BBE-OTU	Background Block Error
	ES-OTU	Errored Seconds
	SES-OTU	Severely Errored Seconds
	UAS-OTU	Unavailable Seconds
	FECC	FEC Errors Corrected
	OPTL	Optical Power Transmitted Low Watermark
	OPTH	Optical Power Transmitted High Watermark
	OPRL	Optical Power Received Low Watermark
	OPRH	Optical Power Received High Watermark
ODU2	BBE-ODU	Background Block Error
	ES-ODU	Errored Seconds
	SES-ODU	Severely Errored Seconds
	UAS-ODU	Unavailable Seconds

Primary WDMX port states

The primary state parameter is supported for each OCH and OTS port. The WDMX port states are:

IS (In Service)
OOS-MA-AS (AUTO)
OOS (Out of Service - Not Monitored)