Control plane parameters

The following table shows the provisionable control plane parameters.

Table A-5: Control plane parameters

Parameter

TL1 Commands (Access) (Note)

Range

Default

Related WaveStar® CIT Commands

Node ID (nodeid)

ENT-NODE

(P)

0-255.0-255.0-255.0-255

0.0.0.0

Configuration → Equipment

Signaling Protocol Controller Identifier (spcid)

0-255.0-255.0-255.0-255

0.0.0.0

Routing Controller (RC) ID (rcid)

0-255.0-255.0-255.0-255

0.0.0.0

Routing Area ID (raid)

0-255.0-255.0-255.0-255

0.0.0.0

SCN IP address (scnipaddr)

0-255.0-255.0-255.0-255

0.0.0.0

Level 1 Routing Controller (l1routing)

Enabled, Disabled

Disabled

Remote Routing Controller Identifier (remrcid)

ENT-RC-NEIGHBOR

(P)

0-255.0-255.0-255.0-255

0.0.0.0

Configuration → Equipment

Remote Routing Controller SCN IP address (remrcscn)

0-255.0-255.0-255.0-255

0.0.0.0

IP over line DCC (ip_linedcc)

ENT-FECOM-SCN

(P)

Enabled, Disabled

Disabled

Administration → Data Communications

IP over LAN (ip_lan)

Enabled, Disabled

Disabled

LAN IP Address (ipaddr_lan)

0-255.0-255.0-255.0-255

None

LAN IP Subnet Mask (ipsnmk_lan)

0-255.0-255.0-255.0-255

None

Destination IP address (dest_ip)

ENT-ROUTE-SCN

(P)

0-255.0-255.0-255.0-255

None

Administration → Data Communications

Destination IP Subnet Mask (dest_mask)

0-255.0-255.0-255.0-255

None

Outgoing Interface (outgoing_intf)

LAN or DCC AID

None

Next Hop IP Address (nexthop_ip)

0-255.0-255.0-255.0-255

None

Link Metric (linkmetric)

ENT-CPORT-T3

ENT-CPORT-EC1

ENT-CPORT-OC3

ENT-CPORT-OC12

ENT-CPORT-OC48

ENT-CPORT-OC192

ENT-CPORT-VCG

(P, G)

1- 65535

1

Configuration → Equipment

Logical Port Identifier (logportid)

1 - 4294967295

1

Port Class (portclass)

Edge, ENNI, Traditional

Traditional

Port Control (portcontrol)

Normal, Lockout

Normal

Remote Logical Port Identifier (remlogportid

1 - 4294967295

1

Remote Node Identifier (remnid)

0-255.0-255.0-255.0-255

None

Remote Routing Controller Identifier (remrcid)

0-255.0-255.0-255.0-255

None

Remote Signaling Protocol Controller Identifier (remspcid)

0-255.0-255.0-255.0-255

None

Remote Signaling Protocol Controller SCN Address (remspcscn)

0-255.0-255.0-255.0-255

None

Remote Node Target Identifier (remtid)

TID of the downstream node that has the ENNI port

None

Transport Network Assigned Address (tna)

Address assigned to endpoints of the connections by the transport service provider

None

Transport Network Assigned Address Type (tnatype)

IPV4, IPV6, NSAP

None

Call Identifier (callid)

ENT-CONN

(P, G)

a fixed-length 12-byte (24-character) hexadecimal string

None

Configuration → Create Control Plane Network Connections

Protection Type (protype)

0x1, 1+1

None

Service Level (servlevel)

0-255

None

Direction (dir)

1way, 2way

None

Bandwidth (bandwidth)

STS1, STS3C, STS12C, STS48C, STS192C

None

Source/Destination Transport Network Assigned Address (TNA) Type (srctnatype and desttnatype)

IPV4, IPV6, NSAP

None

Source/Destination Transport Network Assigned Address (TNA) (srctnaaddress and desttnaaddress)

an address assigned one endpoint of the connection by the transport service provider.

None

Source/Destination Logical Port ID (srclogportid and destlogportid)

1 - 4294967295

None

Source/Destination Label (srclabel and destlabel)

a timeslot (tributary) on the source/destination EDGE port

None

Note: The TL1 command security access levels are Privileged (P), Administration (A), General (G), Maintenance (M), and Reports-only (R).

November 2011Copyright © 2011 Alcatel-Lucent. All rights reserved.