The following table shows the provisionable Data parameters.
|
Parameter |
TL1 Commands (Access) (Note) |
Range |
Default |
Related WaveStar® CIT Commands |
|---|---|---|---|---|
|
Data Type (datatype) |
ED-EQPT (P, G) |
FC-FICON ESCON |
FC-FICON |
Configuration → Equipment |
|
Alarm Severity Assignment Profile (pfname) |
ENT-ASAP-ASGNMT (P, G) |
DEFAULT ASAP User-Created ASAP |
DEFAULT ASAP | |
|
Port Admin Control (admin) |
ED-DPORT (P, G) |
Enable, Disable |
Enable | |
|
Data Port Monitoring Mode (epmode) |
AUTO, NMON IS |
AUTO | ||
|
GFP Encapsulation Type (gfptype) |
FC, FICON, ASYNC-FC (LNW73/73C only) |
FC | ||
|
Line Rate (lnrate) |
1G, 2G |
1G | ||
|
Remote Client Fail (rcf) |
Enable, Disable |
Disable | ||
|
Remote Client Fail Link Shutdown (rcf_linkdown) |
Enable, Disable |
Enable | ||
|
TCA Monitoring Mode (tcamd) |
Enable, Disable |
Disable |
Performance → Prov PM Settings | |
|
Data Port PM Enable (eppm) |
Enable, Disable |
Enable | ||
|
Synchronous Ping Enable (sync_ping) |
Enable, Disable |
Disable |
Configuration → Equipment | |
|
Data Compression (compr) |
Enable, Disable |
Disable | ||
|
VCG Monitoring Mode (vmode) |
ED-VCG-Data (P, G) |
auto, nmon |
auto |
Configuration → Equipment |
|
VCG PM (vpm) |
Enable, Disable |
Enable |
Performance → Prov PM Settings | |
|
LCAS Mode (lcasmd) |
Enable, Disable |
Disable |
Configuration → Equipment | |
|
Hold-Off Timer (htmr) |
0 - 10000 |
200 | ||
|
Wait-To-Restore (wtr) |
0 - 3600 |
5 | ||
|
Virtual Concatenation Mode (vcat) |
Enable, Disable |
Enable | ||
|
Input Membership (source) (inmbs) |
ED-VCGTRIB (P, G) |
Disable, Enable |
Disable |
Configuration → Equipment |
|
Output Membership (sink) (outmbs) |
Disable, Enable |
Disable | ||
|
Note: The TL1 command security access levels are Privileged (P), Administration (A), General (G), Maintenance (M), and Reports-only (R). | ||||
| November 2011 | Copyright © 2011 Alcatel-Lucent. All rights reserved. |