Performance monitoring parameters

The following table shows the provisionable performance monitoring parameters.

Table A-8: Performance monitoring parameters

Parameter

TL1 Commands (Access) (Note)

Range

Default

Related WaveStar® CIT Commands

Monitored Type (montype)

SET-TH-E1

SET-TH-VC12

SET-TH-T1

SET-TH-T3

SET-TH-VT1

SET-TH-STS1

SET-TH-STS3c

SET-TH-STS12c

SET-TH-STS48c

SET-TH-STS192C

SET-TH-EC1

SET-TH-OC3

SET-TH-OC12

SET-TH-OC48

SET-TH-OC192

SET-TH-FE

SET-TH-1GE

SET-TH-DATA

SET-TH-STP

SET-TH-OCH

SET-TH-OTS

SET-TH-ODU2

SET-TH-OTU2

(P, G, M)

Performance → Prov Near-End PM Threshold

Performance → Prov Far-End PM Threshold

Threshold Level (thlev)

Location (locn)

FEND1, NEND

NEND

Direction (dirn)

NULL, NA

NA

Time period (tmper)

15-MIN, 1-DAY, NONE

NA

Format (fmt)

SET-TH-T1

(P, G, M)

SF, ESF

ESF

Performance → Prov Near-End PM Threshold

Performance → Prov Far-End PM Threshold

SET-TH-T3

(P, G, M)

PBIT, FMBIT, CPBIT

PBIT

Note: The TL1 command security access levels are Privileged (P), Administration (A), General (G), Maintenance (M), and Reports-only (R).

1 Far End (FEND) does not apply to Fast Ethernet, Gigabit Ethernet, and Data interfaces.

November 2011Copyright © 2011 Alcatel-Lucent. All rights reserved.