A remote client signal or VCG failure has been detected and the specified Data or Ethernet port has automatically shut down.
|
Alarm Data |
Value/Meaning |
|---|---|
|
Severity Levels |
Critical (CR), Major (MJ), Minor (MN), Not Alarmed (NA), Not Reported (NR) Default: Not Alarmed (NA) |
|
ASAP Type |
Data Port Fast Ethernet Port Gigabit Ethernet Port |
|
AID Type |
Data port Ethernet port |
|
Date |
Month/day/year that the condition was detected |
|
Time |
Hour:minute:second that the condition was detected |
|
Probable Cause |
ALS (Auto Link Shutdown) |
|
Effect on Service |
SA |
|
Alarm Entity Type |
DATA FELAN GELAN |
|
Description |
AUTO link shutdown |
|
Likely Cause |
Either a remote client signal failure or a VCG failure has been detected and the port Remote Client Fail Link Shutdown parameter is enabled. |
|
Visible Indication |
Lighted CR, MJ, or MN LED on the SYSCTL faceplate (when the severity level is provisioned to Critical, Major, or Minor, respectively). |
|
Action |
Proceed to Procedure 5-5: Clear "AUTO link shutdown" alarm. |
| November 2011 | Copyright © 2011 Alcatel-Lucent. All rights reserved. |