Automatic protection switch unused codes

Description

The near-end network element received unexpected switching request codes in the APS channel (specifically, K1 byte, bits 1–4) in the protection switching request for a 1+1_OPTM protection group. The APS channel is provided by the K1 and the K2 bytes in the SONET section overhead of an STS-N to communicate the protection switching protocol between the local and far-end nodes.

Alarm Data

Value/Meaning

Severity Levels

Critical (CR), Major (MJ), Minor (MN), Not Alarmed (NA), Not Reported (NR)

Default: Major (MJ)

ASAP Type

1+1 Optimized Protection Group

AID Type

OC-N line (1+1 optimized protection group)

Date

Month/day/year that the condition was detected

Time

Hour:minute:second that the condition was detected

Probable Cause

APSUC (APS unused codes)

Effect on Service

NSA

Alarm Entity Type

OCN

Description

Automatic protection unused codes

Likely Cause

The OC-N line at the near-end network element has been provisioned to 1+1_OPTM, but the OC-N line at the far-end network element has been provisioned to an incompatible protection group type.

Visible Indication

Lighted CR, MJ, or MN LED on the SYSCTL faceplate (when the severity level is provisioned to Critical, Major, or Minor, respectively)

Action

Proceed to Procedure 5-9: Clear "Automatic protection switch unused codes" alarm.

November 2011Copyright © 2011 Alcatel-Lucent. All rights reserved.