Indicates a difference between the framing of the incoming DS3 signal (from the DSX) and the provisioned framing mode of the receiving port.
|
Alarm Data |
Value/Meaning |
|---|---|
|
Severity Levels |
Critical (CR), Major (MJ), Minor (MN), Not Alarmed (NA), Not Reported (NR) Default: Critical (CR) |
|
ASAP Type |
DS3 Port |
|
AID Type |
DS3 Port |
|
Date |
Month/day/year that the condition was detected |
|
Time |
Hour:minute:second that the condition was detected |
|
Probable Cause |
CBITMM (C-Bit Mismatch) |
|
Effect on Service |
SA or NSA |
|
Alarm Entity Type |
T3 |
|
Description |
inc. DS3 Cbit Mismatch |
|
Likely Cause |
The incoming DS3 signal is provisioned for the M13 frame format and the local DS3 port is provisioned for the CBIT frame format. |
|
Visible Indication |
Lighted CR, MJ, or MN LED on the SYSCTL faceplate (when the severity level is provisioned to Critical, Major, or Minor, respectively) and a flashing Fault LED on the alarmed circuit pack. |
|
Action |
Proceed to Procedure 5-52: Clear "inc. DS3 Cbit Mismatch" alarm. |
| November 2011 | Copyright © 2011 Alcatel-Lucent. All rights reserved. |