Either an internal equipment failure of the specified Fibre Channel circuit pack was detected, or a communications problem between the Fibre Channel circuit pack and the System Controller (SYSCTL) circuit pack was detected.
|
Alarm Data |
Value/Meaning |
|---|---|
|
Severity Levels |
Critical (CR), Major (MJ), Minor (MN), Not Alarmed (NA), Not Reported (NR) Default: Critical (CR) |
|
ASAP Type |
Circuit pack |
|
AID Type |
Slot |
|
Date |
Month/day/year that the condition was detected |
|
Time |
Hour:minute:second that the condition was detected |
|
Probable Cause |
FACTERM (Facility termination equipment failure) |
|
Effect on Service |
SA |
|
Alarm Entity Type |
EQPT |
|
Description |
DATA CP failed |
|
Likely Cause |
A Fibre Channel circuit pack carrying service failed. A failure on a Fibre Channel circuit pack is always SA as the Fibre Channel circuit packs are unprotected. |
|
Visible Indication |
Lighted CR, MJ, or MN LED on the SYSCTL faceplate (when the severity level is provisioned to Critical, Major, or Minor, respectively) and a continuously lighted Fault LED on the failed circuit pack. |
|
Action |
Proceed to Procedure 5-13: Clear "CP failed/CP contributing to a pack failure" alarms. |
| November 2011 | Copyright © 2011 Alcatel-Lucent. All rights reserved. |