inconsistent DCC values

Description

The "User/Network" parameter values are set the same at both ends of the DCC.

Alarm Data

Value/Meaning

Severity Levels

Critical (CR), Major (MJ), Minor (MN), Not Alarmed (NA), Not Reported (NR)

Default: Major (MJ)

ASAP Type

OCn Port

AID Type

Section Data Communications Channel (DCC)

Date

Month/day/year that the condition was detected

Time

Hour:minute:second that the condition was detected

Probable Cause

OSILINKERR (OSI stack error, Data Link Layer)

Effect on Service

NSA

Alarm Entity Type

COM

Description

inconsistent DCC values

Likely Cause

Fibers are misconnected or user network parameter was incorrectly provisioned.

Visible Indication

Lighted CR, MJ, or MN LED on the SYSCTL faceplate (when the severity level is provisioned to Critical, Major, or Minor, respectively) and a continuously lighted Fault LED on the alarmed circuit pack.

Action

Proceed to Procedure 5-84: Clear "inconsistent DCC values" alarm.

November 2011Copyright © 2011 Alcatel-Lucent. All rights reserved.