Severity Levels

Critical (CR), Major (MJ), Minor (MN), Not Alarmed (NA), Not Reported (NR)

SA Default: Critical (CR)

NSA Default: Minor (MN)

ASAP Type

Pluggable Transmission Module

AID Type

Socket

Date

Month/day/year that the condition was detected

Time

Hour:minute:second that the condition was detected

Probable Cause

FACTERM (Facility termination equipment failure)

Effect on Service

SA or NSA

Alarm Entity Type

EQPT

Description

Pluggable Transmission Module insufficient maximum rate

Likely Cause

An unprotected XFP pluggable transmission module that does not support the port rate was installed in the circuit pack- SA.

A protected XFP pluggable transmission module that does not support the port rate was installed in the circuit pack - NSA.

Visible Indication

Lighted CR, MJ, or MN LED on the SYSCTL faceplate (when the severity level is provisioned to Critical, Major, or Minor, respectively), a continuously lighted Fault LED on the pluggable transmission module socket, and a flashing Fault LED on the circuit pack.

Action

Proceed to Procedure 5-109: Clear "Pluggable Transmission Module insufficient maximum rate" alarm.