Segment audit failed LAN in

Description

Transmission audits are enabled on the circuit pack and the system has detected a segment audit failure on the specified incoming LAN.

Alarm Data

Value/Meaning

Severity Levels

Critical (CR), Major (MJ), Minor (MN), Not Alarmed (NA), Not Reported (NR)

Default: Critical (CR)

ASAP Type

Circuit pack

Fast Ethernet port

Gigabit Ethernet port

AID Type

Slot

Ethernet 10/100T Port

Ethernet 1GbE Port

Date

Month/day/year that the condition was detected

Time

Hour:minute:second that the condition was detected

Probable Cause

SEGAUDTIN (Segment audit failed in)

Effect on Service

SA

Alarm Entity Type

EQPT

FELAN

GELAN

Description

Segment audit failed LAN in

Likely Cause

A failed device on the circuit pack caused a packet flow problem on the specified incoming LAN.

Visible Indication

Lighted CR, MJ, or MN LED on the SYSCTL faceplate (when the severity level is provisioned to Critical, Major, or Minor, respectively)

Action

Proceed to Procedure 5-4: Clear "audit failed" alarms.

November 2011Copyright © 2011 Alcatel-Lucent. All rights reserved.