This section briefly describes the major hardware related features of the Alcatel-Lucent 1665 DMXtend.
Below is a list of the sections included in Hardware Features:
Network interface circuit packs (those housed in the MAIN slots of the Alcatel-Lucent 1665 DMXtend shelf)
Important! For more detailed information on the capabilities of these circuit packs, see Circuit packs in Chapter 4, Product description. For technical specifications, see Chapter 10, Technical specifications.
Alcatel-Lucent 1665 DMXtend supports the LNW2 SYSCTL. The SYSCTL provides communication with other circuit packs on the Alcatel-Lucent 1665 DMXtend shelf. The SYSCTL supports all Alcatel-Lucent 1665 DMXtend operations interfaces, including IAO LAN (OSI or TCP/IP), TL1, CIT, office alarms, and miscellaneous discretes. The SYSCTL also supports DCC terminations for each optical line interface.
This section briefly details the circuit packs currently available to provide or support network interfaces for the Alcatel-Lucent 1665 DMXtend. This includes all of the high-speed circuit packs, housed in the MAIN slots of the Alcatel-Lucent 1665 DMXtend shelf, and used to provide the connection to the core-side of the network.
Alcatel-Lucent 1665 DMXtend supports the following VLF Main circuit packs, and supports 0x1 port application on these packs:
LNW84 pack supports up to 8 OC-3 interfaces, 8 OC-12 interfaces, or 2 OC-48 interfaces. Although mixing of interface rates is supported, OC-48 interfaces are only supported on ports 1 and 5. When one of these ports is operating at the OC-48 rate, then the next three adjacent ports cannot be used. The backplane interfaces can operate at 2.5 Gb/s or at 622 Mb/s, supporting all VLF-compatible low-speed packs. The LNW84 provides a total of 50G of Input/Output interfaces. The LNW84 has 70G of usable STS-1 fabric and 10G of usable VT fabric. (The pack could support a 170G STS-1 fabric and a 20G VT fabric with future tributary enhancements.) The LNW84 also supports up to 16 DS1 interfaces and 3 DS3 interfaces.
LNW141 supports one OC-192 interface and provides a total 60G of Input/Output interfaces. The LNW141 has 80G of usable STS-1 fabric and 10G of usable VT fabric. (The pack could support a 185 G STS-1 fabric and a 25G VT fabric with future tributary enhancements.)
The VLF circuit packs also enable true 0x1 operation among the tributary slots by supporting independent cross-connections to the ports in slot 1 and slot 2 of the same low-speed group. True 0x1 allows, with some restrictions, different packs within the same function/growth group.
All tributary circuit packs, with the exception of the LNW7, LNW39, LNW111, LNW112, and LNW391 are supported by the VLF circuit packs.
Alcatel-Lucent 1665 DMXtend supports the following OC-3/12/48/192 network interface cards:
LNW38: OC-12, 1310 nm, intermediate-reach, VT mapping across 6 STS-1s, OSP hardened
LNW40: OC-3, 1310 nm, intermediate-reach, VT mapping across 6 STS-1s, OSP hardened
LNW41: OC-48, PTM-based supports all OC-48 PTMs, VT mapping across 48 STS-1s, OSP hardened
LNW51: OC-12, 1310 nm, long-reach, VT mapping across 12 STS-1s, OSP hardened
LNW52: OC-48, 1310 nm, long-reach, VT mapping across 12 STS-1s, OC-12 to OC-48 upgrade pack, OSP hardened
LNW84: OC-3/OC-12/OC-48 VLF Main, PTM-based, up to 8 OC-3, or 8 OC-12 ports, or up to 2 OC-48 ports, up to 16 DS1 interfaces, and 3 DS3 interfaces are supported, VT mapping across 192 STS-1s, OSP hardened
LNW141: OC-192 PTM-based VLF Main, 1.3SR1, 1.5IR2, 1.5LR2, and DWDM PTMs, OSP hardened
LNW302: 1 OC-3 PTM-based Main, VT mapping across 12 STS-1s, OSP hardened
LNW382: 1 OC-12 PTM-based Main, VT mapping across 6 STS-1s, OSP hardened
LNW601: OC-3, 1310 nm, long-reach, VT mapping across 6 STS-1s, OSP hardened
This section briefly details the circuit packs currently available to provide or support tributary interfaces for the Alcatel-Lucent 1665 DMXtend. This includes all of the low-speed circuit packs and housed in the Function/Growth slots of the Alcatel-Lucent 1665 DMXtend shelf
Note: When the shelf is equipped with non-VLF mains, the low-speed circuit packs support the VT mapping as specified below. When the shelf is equipped with VLF mains, all VT connections are performed in the Mains.
Alcatel-Lucent 1665 DMXtend supports the following optical, tributary interface circuit packs:
LNW31: OC-48, 1310 nm, intermediate-reach, 1 port, VT mapping across 12 STS-1s, OSP hardened
LNW37: OC-3, PTM-based, 4 ports, VT mapping across 12 STS-1s, OSP hardened
LNW45: OC-3, PTM-based, 8 ports, VT mapping across 48 STS-1s, OSP hardened
LNW49: OC-12, PTM-based, 4 ports, VT mapping across 48 STS-1s, OSP hardened
LNW55: OC-3/OC-12/OC-48, PTM-based, multi-port, multi-rate (MPMR), 12 ports, only supported in systems equipped with VLF Main circuit packs, OSP hardened
LNW62: OC-48, PTM-based, 4 ports, only supported in systems equipped with VLF Main circuit packs
LNW402: OC-48, PTM-based, a single low-speed OC-48 port, VT mapping across 12 STS-1s, OSP hardened
LNW603: OC-192, PTM-based, a single low-speed OC-192 port. LNW603 is only support in shelf that is equipped with VLF mains.
WDMX is the name of a family of features that adds metro WDM capabilities to the Alcatel-Lucent 1665 DMXtend product line. WDMX is the integration of WDM functions directly on the Alcatel-Lucent 1665 DMXtend shelf platform. It adds ITU-T Optical Transport Network (OTN) layered structure for WDM within the shelf footprint.
Alcatel-Lucent 1665 DMXtend provides WDMX capabilities with the following circuit packs:
LNW785: 8 channel low-loss DWDM Mux/Demux (OMD5/8), with integrated variable optical attenuators (VOAs).
LNW705: PTM-based Muxponder pack (XM10G/8) multiplexes up to 8 ports of high-bandwidth client interfaces (OC-3, OC-12, OC-48 GigE) onto a single 10G wavelength.
The LNW705 and LNW785 must be installed in a shelf with an LNW2 and at least one Main pack. VLF and non-VLF Mains support the WDM packs.
Alcatel-Lucent 1665 DMXtend supports the following electrical, tributary interface circuit packs:
LNW785: 8 channel low-loss DWDM Mux/Demux (OMD5/8), with integrated variable optical attenuators (VOAs).
LNW705: PTM-based Muxponder pack (XM10G/8) multiplexes up to 8 ports of high-bandwidth client interfaces (OC-3, OC-12, OC-48 GigE) onto a single 10G wavelength.
LNW7: 28DS1PM, 28 ports, enables PM functionality on DS1 interfaces, not supported on shelves equipped with VLF Mains, OSP hardened
LNW8: 56DS1/E1, 56 ports, enables PM functionality on DS1 and E1 interfaces (E1 functionality provisionable on a per pack basis), OSP hardened
LNW16: 12DS3/EC1, 12 ports, DS3 or EC-1 service is provisionable on a per-port basis, OSP hardened
LNW18: DS1/DS3 TransMUX, 12 ports, capable of collecting various DS1 signals from around a ring and combining them into channelized DS3 signals, OSP hardened
LNW19B: 48DS3/EC1, 48 ports, DS3 or EC-1 service is provisionable on a per-port basis, supports DS3 loopbacks, OSP hardened
LNW20: DS1/DS3 TransMUX/Portless, 48 ports, DS3, EC1, and TMUX functionality on a port-by-port basis, supports channelized or unchannelized DS-3s, also offers a portless mode wherein the pack pulls DS1s from channelized DS3 signals that enter Alcatel-Lucent 1665 DMXtend on a SONET STS-1 interface (on another pack) and then converts them to a VT mapped STS-1, OSP hardened
LNW39: DS1/DS3/16/3, 16 DS1 ports, 3 DS3 ports, OSP hardened
LNW391: DS1/DS3/16/3, redesigned version of the LNW39, 16 DS1 ports, 3 DS3 ports, OSP hardened
LNW801: 56DS1/E1, redesigned version of the LNW8, 56 ports, enables PM functionality on DS1 and E1 interfaces (E1 functionality provisionable on a per pack basis), OSP hardened
Alcatel-Lucent 1665 DMXtend supports the following Ethernet interface circuit packs:
LNW63: 4-port Optical/Electrical Gigabit Ethernet Private Line, 4 optical 1000BASE-SX/LX/ZX or 4 electrical 1000BASE-T PTMs, OSP hardened
LNW64: 8-port Optical/Electrical Gigabit Ethernet Private Line, 8 optical 1000BASE-SX/LX/ZX or 8 electrical 1000BASE-T PTMs, also supports a mix of 4 optical and 4 electrical PTMs, 168 STS-1 capacity, requires VLF Mains, OSP hardened
LNW73: FC-DATA, 4 ports, support of FICON, ESCON, or Fibre-Channel interfaces using PTM optics, pack must be equipped with only one type of PTM: either FICON/FC or ESCON.
LNW73C: FC-DATA, 4 ports, support of FICON, ESCON, or Fibre-Channel interfaces with compression. Identical to the LNW73, except that is supports compression of SAN traffic, resulting in an increase of bandwidth efficiency to the order of 100%.
LNW74: Fast Ethernet Private line pack, PTM–based, 16 10/100BASE-T and 8 optical 100BASE-ZX/LX/FX ports, OSP hardened
LNW87: Private Line Ethernet, PTM-based 4-port Fast Ethernet or Gigabit Ethernet (per port provisionable) 100/1000BASE-T, 100BASE-ZX/LX/FX, and 1000BASE-SX/LX/ZX, OSP hardened
LNW170: 4-port Gigabit Ethernet and 4-port Fast Ethernet, Private Line or Switched Ethernet, PTM-based, 100/1000BASE-T, 100BASE-ZX/LX/FX, and 1000BASE-SX/LX/ZX ports
LNW910: 1-port 10GE and 10-port Fast Ethernet or Gigabit Ethernet, 100/1000BASE-T (industrial temp), 100BASE-LX, 1000BASE-SX/LX/ZX, and 10GBASE-LR/ER/ZR, for use with VLF mains only, OSP hardened
Alcatel-Lucent 1665 DMXtend also supports the following hardware:
PTM optics are pluggable optics. Circuit packs using pluggable optics do not come equipped with optics; you can order only the number and type of optics required at the time of installation. Additional optics can then be ordered as new services are required which makes Alcatel-Lucent 1665 DMXtend interface density scalable to meet the unique needs of each customer. The PTM optics also allow for some versatility in the span lengths and rates that can be covered by the same pack.
PTMs are either SFPs or XFPs. OC-3, OC-12, OC-48, Fast Ethernet, and Gigabit Ethernet ports use optical SFPs. OC-192 port use optical XFPs. Electrical SFPs are also available for Fast Ethernet and Gigabit Ethernet ports The LNW705 (10G Muxponder) packs use SFPs on the 8 client ports and an XFP on the OTU2 port.
The LNW63/64/87/170 packs support dual-function electrical SFPs that are provisionable for 100 or 1000 Mbps (electrical FE or GbE) traffic. They conform to the IEEE802.3 standards for 100BASE-T and 1000BASE-T in the respective settings (IEEE802.3z and IEE802.3ab). Connectivity is provided for an RJ-45 Cat 5 cable and the SFP has a maximum span length of 100 meters.
For OC-48/192 spans of up to 140 km, Alcatel-Lucent offers external optical amplifiers. The external optical amplifier is a stand-alone shelf and can be used with both OC-48 and OC-192 optics.
External optical amplifiers consist of one booster and one pre-amplifier part. The booster part is connected via a Dispersion Compensation Module (DCM) to the transmit interface of the respective OC-192 or OC-48 port unit. The pre-amplifier part is connected by means of a DCM to the receive interface of the associated port unit.
The Alcatel-Lucent Passive Optics Units (POUs) are a lower-cost solution to using DWDM for transmitting large amounts of traffic on one fiber. This module fits into a bay frame, but reduces the number of Alcatel-Lucent 1665 DMXtend shelves in a bay to three. The box does not require any electrical powering.
POU shelves are available to support the following applications:
Optical add-drop module (OADM): one 1310 nm port and four 1550 nm ports
16 unidirectional/bidirectional wavelengths (2 versions): MUX/DMUX
32 wavelengths; 16 unidirectional/bidirectional wavelengths with a wavelength interleaver used to add another 16 wavelengths: MUXINT/DMUXINT
Alcatel-Lucent 1665 DMXtend supports a circuit pack designed to aid technicians in the installation and maintenance of Electrical interfaces and cables. The Electrical Continuity Test Tool (LNW94) can be placed in D1, D2, G1, G2 on the Alcatel-Lucent 1665 DMXtend shelf. It is used to test the cables which will be connected to DS1, DS3, or Ethernet electrical interfaces. LNW94 tests the integrity of electrical cables to both identify where trouble exists and which cables or DSX panels are faulty prior to installation and turn up.
The In-service Electrical Continuity Test Tool (LNW93) test circuit pack is used for upgrades in the Alcatel-Lucent 1665 DMXtend shelf. An in-service shelf might have a function unit with low capacity DS1 (LNW7) or DS3 (LNW16) packs. When these packs are upgraded with higher capacity packs (DS1, LNW8, DS3, LNW19B), as part of the upgrade procedure, new DS1 or DS3 connectorized cables are added to the DSX cross-connect frames and to the Alcatel-Lucent 1665 DMXtend shelf. The LNW93 pack is used to test out the new wiring without disrupting traffic on the in-service pack.
The LNW93 is very similar to the LNW94 test tool except that it has no backplane connectors for DS1 ports #1–28 or for DS3 ports #1–12. When the LNW93 is plugged in, it makes no contact with the wires on the backplane for those lower ports. Since there is no physical connection, the LNW93 does not interfere with the service of the pack in the other slot of the function unit. The LNW93 tests the integrity of electrical cables to both identify where trouble exists and which cables or DSX panels are faulty prior to installation and turn up of a high density DS1 or DS3 circuit pack.
Alcatel-Lucent 1665 DMXtend provides a removable center divider between M1/2 and A1/B1/A2/B2. When the center divider is removed the shelf supports the full-height LNW84 and LNW141 circuit packs. This shelf contains all the capabilities of the standard Alcatel-Lucent 1665 DMXtend shelf, it simply allows the option to remove the center divider in order to support these full-width, high-speed packs in the MAIN slots.
Alcatel-Lucent 1665 DMXtend provides blank cards to be used as fillers in unpopulated slots of the shelf. These fillers help to ensure proper air flow, cooling and EMC safety.
Some blanks can be detected and reported.
Alcatel-Lucent 1665 DMXtend supports three detectable blank circuit packs: LNW95 in an unequipped M2, LNW96 in and unequipped A1/B1 slot, and LNW98 in unequipped Function D and Growth slots.
The WaveStar® CIT reports the presence of a detectable blank in a slot by displaying a blank faceplate graphic instead of an empty slot graphic. No alarms are associated with the insertion or removal of the detectable blank.
|
Blank pack |
Slot(s) |
Detected |
|---|---|---|
|
LNW42 |
M2 |
No |
|
LNW43 |
A1/B1 and A2/B2 (half-height) |
No |
|
177D |
D and G |
No |
|
LNW95 |
M2 |
Yes |
|
LNW96 |
A1/B1 and A2/B2 (half-height) |
Yes |
|
LNW98 |
D and G |
Yes |
| September 2013 | Copyright © 2013 Alcatel-Lucent. All rights reserved. |