The following table shows the provisionable control plane parameters.
|
Parameter |
TL1 Commands (Access) (Note) |
Range |
Default |
Related WaveStar® CIT Commands |
|---|---|---|---|---|
|
Node ID (nodeid) |
ENT-NODE (P) |
0–255.0–255.0–255.0–255 |
0.0.0.0 |
Configuration → Equipment |
|
Signaling Protocol Controller Identifier (spcid) |
0–255.0–255.0–255.0–255 |
0.0.0.0 | ||
|
Routing Controller (RC) ID (rcid) |
0–255.0–255.0–255.0–255 |
0.0.0.0 | ||
|
Routing Area ID (raid) |
0–255.0–255.0–255.0–255 |
0.0.0.0 | ||
|
SCN IP address (scnipaddr) |
0–255.0–255.0–255.0–255 |
0.0.0.0 | ||
|
Level 1 Routing Controller (l1routing) |
Enabled, Disabled |
Disabled | ||
|
Remote Routing Controller Identifier (remrcid) |
ENT-RC-NEIGHBOR (P) |
0–255.0–255.0–255.0–255 |
0.0.0.0 |
Configuration → Equipment |
|
Remote Routing Controller SCN IP address (remrcscn) |
0–255.0–255.0–255.0–255 |
0.0.0.0 | ||
|
IP over line DCC (ip_linedcc) |
ENT-FECOM-SCN (P) |
Enabled, Disabled |
Disabled |
Administration → Data Communications |
|
IP over LAN (ip_lan) |
Enabled, Disabled |
Disabled | ||
|
LAN IP Address (ipaddr_lan) |
0–255.0–255.0–255.0–255 |
None | ||
|
LAN IP Subnet Mask (ipsnmk_lan) |
0–255.0–255.0–255.0–255 |
None | ||
|
Destination IP address (dest_ip) |
ENT-ROUTE-SCN (P) |
0–255.0–255.0–255.0–255 |
None |
Administration → Data Communications |
|
Destination IP Subnet Mask (dest_mask) |
0–255.0–255.0–255.0–255 |
None | ||
|
Outgoing Interface (outgoing_intf) |
LAN or DCC AID |
None | ||
|
Next Hop IP Address (nexthop_ip) |
0–255.0–255.0–255.0–255 |
None | ||
|
Link Metric (linkmetric) |
ENT-CPORT-T3 ENT-CPORT-EC1 ENT-CPORT-OC3 ENT-CPORT-OC12 ENT-CPORT-OC48 ENT-CPORT-OC192 ENT-CPORT-VCG (P, G) |
1– 65535 |
1 |
Configuration → Equipment |
|
Logical Port Identifier (logportid) |
1–4294967295 |
1 | ||
|
Port Class (portclass) |
Edge, ENNI, Traditional |
Traditional | ||
|
Port Control (portcontrol) |
Normal, Lockout |
Normal | ||
|
Remote Logical Port Identifier (remlogportid |
1 - 4294967295 |
1 | ||
|
Remote Node Identifier (remnid) |
0–255.0–255.0–255.0–255 |
None | ||
|
Remote Routing Controller Identifier (remrcid) |
0–255.0–255.0–255.0–255 |
None | ||
|
Remote Signaling Protocol Controller Identifier (remspcid) |
0–255.0–255.0–255.0–255 |
None | ||
|
Remote Signaling Protocol Controller SCN Address (remspcscn) |
0–255.0–255.0–255.0–255 |
None | ||
|
Remote Node Target Identifier (remtid) |
TID of the downstream node that has the ENNI port |
None | ||
|
Transport Network Assigned Address (tna) |
Address assigned to endpoints of the connections by the transport service provider |
None | ||
|
Transport Network Assigned Address Type (tnatype) |
IPV4, IPV6, NSAP |
None | ||
|
Call Identifier (callid) |
ENT-CONN (P, G) |
a fixed-length 12-byte (24-character) hexadecimal string |
None |
Configuration → Create Control Plane Network Connections |
|
Protection Type (protype) |
0x1, 1+1 |
None | ||
|
Service Level (servlevel) |
0–255 |
None | ||
|
Direction (dir) |
1way, 2way |
None | ||
|
Bandwidth (bandwidth) |
STS1, STS3C, STS12C, STS48C |
None | ||
|
Source/Destination Transport Network Assigned Address (TNA) Type (srctnatype and desttnatype) |
IPV4, IPV6, NSAP |
None | ||
|
Source/Destination Transport Network Assigned Address (TNA) (srctnaaddress and desttnaaddress) |
an address assigned one endpoint of the connection by the transport service provider. |
None | ||
|
Source/Destination Logical Port ID (srclogportid and destlogportid) |
1 - 4294967295 |
None | ||
|
Source/Destination Label (srclabel and destlabel) |
a timeslot (tributary) on the source/destination EDGE port |
None | ||
|
Note: The TL1 command security access levels are Privileged (P), Administration (A), General (G), Maintenance (M), and Reports-only (R). | ||||
| November 2011 | Copyright © 2011 Alcatel-Lucent. All rights reserved. |