Procedure 8-1: View performance monitoring (PM) thresholds

- Overview

Use this procedure to view performance monitoring (PM) thresholds for ports or tributaries.

- Privilege level

You must log in as a Privileged, General, Maintenance, or Reports Only user to view PM thresholds.

- Before you begin

Prior to performing this procedure, refer to Before you begin and Required equipment in this chapter.

Steps

Perform the following steps to view PM thresholds.

 
1

From the System View menu, select either Performance → View Near-End PM Threshold or Performance → View Far-End PM Threshold, as required, then select the desired port rate or tributary rate.

Result:

The View ( ) Near-End PM Threshold or View ( ) PM Far-End Threshold window opens for the port or tributary rate selected.


2

View the parameters and threshold values, then at the bottom of the window, click the appropriate button as required: Save As, Print, Refresh, Close, or Help.


End of steps

November 2011Copyright © 2011 Alcatel-Lucent. All rights reserved.