Procedure 8-4: View performance monitoring (PM) settings
Overview
Use this procedure to view the provisioned performance monitoring and TCA reporting parameters for a port, tributary, or VCG.
Privilege level
You must log in as a Privileged, General, Maintenance, or Reports Only user to view performance monitoring and TCA reporting parameters.
Before you begin
Prior to performing this procedure, refer to Before you begin and Required equipment in this chapter.
Steps
Perform the following steps to view performance monitoring and TCA reporting parameters.
1 |
From the System View menu, select Performance → View PM Settings. Result: The View PM window opens. |
2 |
Expand the details for the required Function group or main circuit pack with the ports, tributaries, or VCGs being viewed. Click on the required port, tributary, or VCG you want to view, then click Select. |
3 |
View the desired parameters, then at the bottom of the window, click the appropriate button as required: Refresh, Close, or Help. End of steps |