Procedure 8-8: Clear threshold crossing alert (TCA) counts
Overview
Important!
Executing the command in this procedure will reset and clear the threshold crossing alert (TCA) counts. Ensure you want to execute this procedure before continuing.
Use this procedure to clear threshold crossing alert (TCA) counts.
Privilege level
You may log in as either a Privileged, General, Maintenance user to complete this procedure.
Before you begin
Prior to performing this procedure, refer to Before you begin and Required equipment in this chapter.
Steps
Perform the following steps to clear TCA counts.
1 |
From the System View menu, select Fault → Clear TCA Count. Result: A dialog box appears asking you to confirm executing this command. |
2 |
Click Yes. Result: The TCA counts are cleared. End of steps |