|
Port Type (porttype) |
ED-EPORT
(P, G) |
Boundary, Interior |
Boundary |
Configuration → Equipment |
|
Port Role (portrole) |
Customer, Network |
Customer |
|
Duplex Mode (dplxmd) |
half, full, auto |
auto |
|
Ethernet Port Monitoring Mode (epmode) |
AUTO
NMON
IS |
AUTO |
|
Ethernet Port PM Enabled (eppm) |
ED-EPORT
(P, G) |
Enable, Disable |
Enable |
Performance → Prov PM Settings |
|
Flow Control Mode (fcmd) |
Enable, Disable, auto, drop |
auto |
Configuration → Equipment |
|
Line Rate (lnrate) |
10m, 100m, auto
LNW87: 10m, 100m, auto, GX, GT, FX, FT |
auto
LNW87: GX |
|
Default Port Tag (dftporttag) |
1 - 4093 or 0 |
0 |
|
Default Priority (dftpri) |
NA, high, low |
NA |
|
LNW70/170: 0 -3, NA |
0 |
|
LNW78: 1 - 3 |
1 |
|
Alarm Severity Assignment Profile (pfname) |
ENT-ASAP-ASGNMT
(P, G) |
DEFAULT ASAP
User-Created ASAP |
DEFAULT ASAP |
Configuration → Equipment |
|
Tag Filter (tagfilter) |
ED-EPORT
(P, G) |
Enable, Disable |
Enable |
|
Add Port Tag ID (addporttag) |
1 - 4093 (Up to 55 Port Tag IDs in a single command) |
None |
|
Delete Port Tag ID (delporttag) |
1 - 4093 |
None |
|
Remote Client Fail (rcf) |
ED-EPORT
(P, G) |
Enable, Disable |
Disable |
Configuration → Equipment |
|
Remote Client Fail Link Shutdown (rcf_linkdown) |
Enable, Disable |
Enable |
|
Remote Client Fail Reverse Defect Indication (rcf_rdi) (LNW87 only) |
Enable, Disable |
Enable |
|
Link down hold-off Timer (rcf_ldhotmr) |
0 to 10000 milliseconds (10 seconds), in 100 millisecond steps
99999 milliseconds (representing infinity) |
200 milliseconds |
|
Far End Fault Indication Detection (fefi_det) (LNW74, LNW70/170, and LNW87 only) |
LAN, LAN_RCF, RCF, Disable |
Disable |
|
Far End Fault Indication Generation (fefi_gen) (LNW74, LNW70/170, and LNW87 only) |
LAN, LAN_RCF, RCF, Disable |
Disable |
|
Link Good (link_good) (LNW74, LNW70/170, and LNW87 only) |
Enable, Disable |
Disable |
|
Port Admin Control (admin) |
Enable, Disable |
Enable |
|
TCA Monitoring Mode (tcamd) |
ED-EPORT
(P, G) |
Enable, Disable |
Disable |
Performance → Prov Settings |
|
Jumbo Frame Support (jumbo) |
Enable, Disable |
Enable |
Configuration → Equipment |
|
MTU (Maximum Transmission Unit) Size (mtu_size) |
LNW63: 46 - 10222
LNW64: 46 - 10222
LNW70/170:46 - 10222
LNW74: 1500 - 9614
LNW78, LNW87, LNW705: 46 - 10222 |
1508 |
|
Exceeded MTU size drop threshold (emsdt) |
0 (feature disabled) to 1000 (100 per cent), in steps of 1 (0.1 per cent) |
0 |
|
Auto-Negotiation (autoneg) |
Enable, Disable |
Enable |
|
Crossover (mdix) |
auto, mdix, mdi |
auto |
|
Ethernet Type Field (ethertype) |
0601 to FFFF (hexadecimal) |
FFFF |
|
Network Port AF Queue Weighting Factor (qwt_ntwkAF) |
ED-EPORT
(P, G) |
1 - 100 |
64 |
Configuration → Equipment |
|
Customer Port AF Queue Weighting Factor (qwt_custAF) |
1 - 100 |
36 |
|
Total Queue Size (qsz) |
For the LNW63 and LNW74:
-
NA
-
128 (FE ports only)
-
512 (GE ports only) |
NA |
|
For LNW70/170 and LNW78 with vlantagmd=switched 0 - 256. |
256 |
|
|
Yellow Packet Min Drop Threshold (qminthldy) |
ED-EPORT
(P, G) |
0 - 100 |
33 |
Configuration → Equipment |
|
Yellow Packet Max Drop Threshold (qmaxthldy) |
0 - 100 |
50 |
|
Green Packet Min Drop Threshold (qminthldg) |
0 - 100 |
90 |
|
CoS 0 Packets Drop Probability Mark (qdropwt0) |
0 - 100 |
100 |
|
CoS 1 Packets Drop Probability Mark (qdropwt1) |
ED-EPORT
(P, G) |
0 - 100 |
100 |
Configuration → Equipment |
|
CoS 2 Packets Drop Probability Mark (qdropwt2) |
0 - 100 |
100 |
|
CoS 3 Packets Drop Probability Mark (qdropwt3) |
0 - 100 |
50 |
|
Broadcast and Multicast Rate Limit (bcratelimit) |
LNW70/170: 0 - 4000000
LNW78: 0 - 1000000 |
0 |
|
Traffic Management Mode (trafmgmtmd) |
ED-EPORT
(P, G) |
NOTC, PORT, TAGPORT, COSPORT, COSTAGPORT |
PORT |
Configuration → Data → Provision QoS Service
Configuration → Equipment |
|
Higher Layer Class of Service (hlayercos) |
None, DSCP |
None |
|
Spanning Tree Port Priority (stpp) |
ED-EPORT
(P, G) |
0 - 255 |
128 |
Configuration → Equipment |
|
Spanning Tree Path Cost (stpcost) |
1 - 65535 |
65535 |
|
Spanning Tree Hello Timer (sthellotm) |
1 - 10 seconds |
2 |
|
Ethernet Port Spanning Tree Status (epss) |
Enable, Disable |
Enable |
|
Spanning Tree VLAN ID (stvid) |
ED-EPORT
(P, G) |
0 - 4095 |
0 |
Configuration → Equipment |
|
Ethernet Frame Check Sequence Mode (ethfcs) |
Enable, Disable |
Enable |
|
Locked Source Address (locked_sa) |
Enable, Disable |
Disable |
|
Actor Admin Port State LACP Activity (aapslact) |
Active, Passive |
Active |
|
Actor Admin Port State LACP Timeout (aapsltimo) |
Long, Short |
Long |
|
Actor Port Priority (actppri) |
0 to 65535 |
32768 |
|
Spanning Tree Group ID (stgrpid) |
ENT-STGRP ED-STGRP
(P, G) |
1–4095 |
None |
Configuration → Data → Create Spanning Tree Group
Configuration → Ethernet Service |
|
Virtual Switch ID (vrtswid) |
1–4095
LNW70/170: 1–16 |
None |
|
Spanning Tree Root Priority (strp) |
0 - 65535 |
32768 |
|
Automatic Lock (autolock) |
Enable, Disable |
Disable |
|
Spanning Tree Max Age Timer (stmaxage) |
6–255 |
255 |
|
Spanning Tree forward delay timer (stfdtm) |
4–255 |
15 |
|
VCG AID List (vcglist) |
An ampersand-separated list of VCG AIDs. |
None |
|
Ethernet Port AID List (eplst) |
An ampersand-separated list of Ethernet port and Link Aggregation Group (LAG) AIDs. |
None |
|
Port Type (porttype) |
ED-VCG
(P, G) |
Boundry, Interior |
Interior |
Configuration → Data → Provision QoS Service
Configuration → Equipment |
|
Port Role (portrole) |
LNW70/170: Customer, Network
LNW78: Customer |
LNW70/170: Network
LNW78: Customer |
|
Spanning tree port priority (stpp) |
0–255 |
128 |
Configuration → Equipment |
|
VCG Monitoring Mode (vmode) |
auto, nmon |
auto |
|
Alarm Severity Assignment Profile (pfname) |
ENT-ASAP-ASGNMT
(P, G) |
DEFAULT ASAP
User-Created ASAP |
DEFAULT ASAP |
|
VCG PM Enable (vpm) |
ED-VCG
(P, G) |
Enable, Disable |
Enable |
Performance → Prov PM Settings |
|
TCA Monitoring Mode (tcamd) |
Enable, Disable |
Disable |
|
Spanning Tree Path Cost (stpcost) |
1 - 65535 |
10 |
Configuration → Equipment |
|
Spanning Tree Hello Timer (sthellotm) |
1 - 10 seconds |
2 |
|
Spanning Tree VLAN ID (stvid) |
0 - 4095 |
4095 |
|
VCG Spanning Tree Status (vss) |
Enable, Disable |
Enable |
|
Default Priority (dftpri) |
LNW70/170: 0–3, NA
LNW78: 1–3 |
LNW70/170: 0
LNW78: 1 |
Configuration → Data → Provision QoS Service
Configuration → Equipment |
|
Default Port Tag (dftporttag) |
1–4093 or 0 |
0 |
Configuration → Equipment |
|
Valid Port Tag Add List (addporttag) |
Ampersand separated list (1–4093) |
None |
|
Valid Port Tag Delete list (delporttag) |
Ampersand separated list (1–4093) |
None |
|
Pause control (psctl) |
Transparent, Local, None |
Local |
|
Tag Filter (tagfilter) |
Enable, Disable |
Enable |
|
MTU (Maximum Transmission Unit) Size (mtu_size) |
46 - 10222 |
1508 |
|
Exceeded MTU size drop threshold (emsdt) |
0 (feature disabled) to 1000 (100 per cent), in steps of 1 (0.1 per cent) |
0 (feature is disabled) |
|
Ethernet Type Field (ethertype) |
0601 to FFFF (hexadecimal) |
FFFF |
|
GFP Frame Check Sequence (gpf_fcs) |
ED-VCG
(P, G) |
Enable, Disable |
Disable |
Configuration → Equipment |
|
LCAS Mode (lcasmd) |
Enable, Disable |
Enable |
|
Hold-Off Timer (htmr) |
0 - 10000 |
200 |
|
Wait-To-Restore (wtr) |
0 - 3600 |
5 |
|
Virtual Concatenation Mode (vcat) |
Enable, Disable |
Enable |
|
Network Port AF Queue Weighting Factor (qwt_ntwkAF) |
ED-VCG
(P, G) |
1 - 100 |
64 |
Configuration → Equipment |
|
Customer Port AF Queue Weighting Factor (qwt_custAF) |
1 - 100 |
36 |
|
Total Queue Size (qsz) |
For LNW70/170 with vlantagmd=notag (private-line):
-
NA
-
128 (FE ports only)
-
512 (GE ports only) |
NA |
|
For LNW70/170 and LNW78 with vlantagmd=switched 0 - 256. |
256 |
|
Yellow Packet Min Drop Threshold (qminthldy) |
0 - 100 |
33 |
|
Yellow Packet Max Drop Threshold (qmaxthldy) |
0 - 100 |
50 |
|
Green Packet Min Drop Threshold (qminthldg) |
ED-VCG
(P, G) |
0 - 100 |
90 |
Configuration → Equipment |
|
CoS 0 Packets Drop Probability Mark (qdropwt0) |
0 - 100 |
100 |
|
CoS 1 Packets Drop Probability Mark (qdropwt1) |
0 - 100 |
100 |
|
CoS 2 Packets Drop Probability Mark (qdropwt2) |
0 - 100 |
100 |
|
CoS 3 Packets Drop Probability Mark (qdropwt3) |
0 - 100 |
50 |
|
Traffic Management Mode (trafmgmtmd) |
ED-VCG
(P, G) |
LNW70/170: NOTC, PORT, TAGPORT, COSPORT, COSTAGPORT
LNW78: PORT, COSPORT |
LNW70/170: NOTC
LNW78: PORT |
Configuration → Data → Provision QoS Service
Configuration → Equipment |
|
Higher Layer Class of Service (hlayercos) |
None, DSCP |
None |
|
Broadcast and Multicast Rate Limit (bcratelimit) |
0 - 1000000 |
0 |
Configuration → Equipment |
|
Ethernet FCS Mode (ethfcs) |
Enable, Disable |
Enable |
|
Locked Source Address (locked_sa) |
Enable, Disable |
Disable |
|
Tagging Mode (vlantagmd) |
ED-EQPT
(P, G) |
802.1TAG, TRANS, NOTAG, SWITCHED2 |
802.1TAG: LNW66
NOTAG: LNW70/170, LNW87
SWITCHED: LNW78 |
Configuration → Equipment
Configuration → Ethernet Service |
|
Burst (brst) |
1–255 |
5 |
Configuration → Equipment |
|
Credit Interval (cint) |
1–4095
(524.29 µsec-2.15 sec) |
125
(65.5 msec) |
|
Ethernet Cross-Connect Mode (eccmode) |
STS1, STS3C3, STS12C |
STS1 |
|
VT Virtual Concatenation (vt_vcat) |
ED-EQPT
(P, G) |
0, 12 |
0 |
Configuration → Equipment |
|
Ethernet Port Mode (enetmd) |
LNW63: GX, GT
LNW64: GX, GT, GT_GX
LNW70/170: GX_FX, GT_FX, FT_FX, GX_FT, GT_FT, FT
LNW74: FT_FX, FX
LNW78: GX_FX, GT_FX, GX_FT, GT_FT |
LNW63 and LNW64: GX
LNW70/170 and LNW78: GX_FX
LNW74: FT_FX, |
|
Slot Protection State (prot_state) (LNW170 only) |
UNPROT, PROT |
UNPROT |
|
Transmission Audit (LNW70/170 only)(taudit) |
Enabled, Disabled |
Enabled |
|
Far End Fault Indication Code (fefi_code) |
2 digit hexadecimal number in the range 03 to FE |
05 |
|
MAC Address (mac) |
ENT-MAC
(P, G) |
LNW78: String of 12 hexadecimal characters |
None |
Configuration → Data → Create MAC Address |
|
VLAN or Port Tag (tag) |
1 - 4093 |
None |
|
Address Type (type) |
Persistent, Filtered |
None |
|
Ethernet LAN/VCG Port AID (portaid) |
valid LAN Port, VCG, RPR VCG, EoS VCG, or Link Aggregation Group (LAG) AID required |
None |
|
RPR MAC Address (rpr_mac) |
String of 12 hexadecimal characters |
None |
|
Virtual Switch ID (vrtswid) |
ENT-VRTSW
(P, G) |
1 - 4095
LNW70/170: 1–16
LNW78: 1–8 |
None |
Configuration → Data → Create Virtual Switch
Configuration → Ethernet Service |
|
LAN port list (eplst) |
Ampersand separated list of port and Link Aggregation Group (LAG) AIDs |
None |
|
VCG port list (vcglst) |
Ampersand separated list of VCG, RPR IF VCG, and EoS VCG AIDs |
None |
|
Virtual LAN Tagging Mode (tagmd) |
802.1TAG, TRANS |
802.1TAG |
|
Composite list of LAN ports to be added to virtual switch (addep) |
ED-VRTSW
(P, G) |
Ampersand separated list of port and Link Aggregation Group (LAG) AIDs |
None |
Configuration → Data → Provision Virtual Switch |
|
Composite list of VCG ports to be added to virtual switch (addvcg) |
Ampersand separated list of VCG, RPR IF VCG, EoS VCG AIDs |
None |
|
Composite list of LAN ports to be deleted from virtual switch (delep) |
Ampersand separated list of port and Link Aggregation Group (LAG) AIDs |
None |
|
Composite list of VCG ports to be deleted from virtual switch (delvcg) |
Ampersand separated list of VCG, RPR IF VCG, EoS VCG AIDs |
None |
|
VLAN ID (vlanid) |
ENT-VLAN
(P, G) |
1– 4093 range |
None |
Configuration → Data → Create VLAN Configuration → Ethernet Service |
|
Virtual Switch ID (vrtswid) |
1 - 4095
LNW70/170: 1–16
LNW78: 1–8 |
None |
|
Ethernet/LAN port list (eplst) |
Ampersand separated list of port and Link Aggregation Group (LAG) AIDs |
None |
|
VCG/WAN port list (vcglst) |
Ampersand separated list of VCG, RPR IF VCG, EoS VCG AIDs |
None |
|
Default Ethernet/LAN port list (dfeplst) |
Ampersand separated list of port and Link Aggregation Group (LAG) AIDs |
None |
|
Default VCG/WAN port list (dfvcglst) |
Ampersand separated list of VCG, RPR IF VCG, EoS VCG AIDs |
None |
|
Composite list of LAN ports to be added to as VLAN members (addep) |
ED-VLAN
(P, G) |
Ampersand separated list of port and Link Aggregation Group (LAG) AIDs |
None |
Configuration → Data → Provision VLAN |
|
Composite list of VCG ports to be added as VLAN members (addvcg) |
Ampersand separated list of VCG, RPR IF VCG, EoS VCG AIDs |
None |
|
Composite list of LAN ports to be added to as VLAN default ports (adddfep) |
Ampersand separated list of port and Link Aggregation Group (LAG) AIDs |
None |
|
Composite list of VCG ports to be added as VLAN default ports (adddfvcg) |
Ampersand separated list of VCG, RPR IF VCG, EoS VCG AIDs |
None |
|
Composite list of LAN ports to be deleted as VLAN members (delep) |
ED-VLAN
(P, G) |
Ampersand separated list of port and Link Aggregation Group (LAG) AIDs |
None |
Configuration → Data → Provision VLAN |
|
Composite list of VCG ports to be deleted as VLAN members (delvcg) |
Ampersand separated list of VCG, RPR IF VCG, EoS VCG AIDs |
None |
|
Composite list of LAN ports to be deleted as VLAN default ports (deldfep) |
Ampersand separated list of port and Link Aggregation Group (LAG) AIDs |
None |
|
Composite list of VCG ports to be deleted as VLAN default ports (deldfvcg) |
Ampersand separated list of VCG, RPR IF VCG, EoS VCG AIDs |
None |
|
Input Membership (source) (inmbs) |
ED-VCGTRIB
(P, G) |
Disable, Enable |
Disable |
Configuration → Equipment |
|
Output Membership (sink) (outmbs) |
Disable, Enable |
Disable |
|
Tag ID (tagid) |
ENT-ERATE
ED-ERATE
(P, G) |
1–4093 |
None |
Configuration → Data → Provision QoS Service |
|
Class of Service (cos) |
0–3
LNW78: 1–3 |
None |
|
Committed Burst Size (cbs) |
1–255 |
20 |
|
Committed Information Rate (cir) |
0 -10000 |
0 |
|
Peak Burst Size (pbs) |
1–255 |
30 |
|
Peak Information Rate (pir) |
ENT-ERATE
ED-ERATE
(P, G) |
0–10000 |
10000 |
Configuration → Data → Provision QoS Service |
|
QoS Performance Monitoring (qospm) |
Enable, Disable |
Enable |
|
Default Class of Service (dftpri2cos) |
0–3 |
0 |
|
User Priority Bit (userpri2cos) |
String of 8 characters using 0 and 1 |
CoS 0: 01100000
CoS 1: 10010000
CoS 2: 00001100
CoS 3: 00000011 |
|
Differentiated Services Code Point to CoS Level (dscp2cos) |
ENT-ERATE
ED-ERATE
(P, G) |
An ampersand-separated list of integers between 0 and 64. A dash (-) between 2 integers is allowed and represents a range. The value 64 is used to classify non-DSCP traffic to a CoS. |
Defaults based on RFC2474, RFC2597, and RFC2598.1 |
Configuration → Data → Provision QoS Service |
|
Enhanced Bridging Mode (enh_brdgmd) |
ED-RPR
(P, G) |
Enable, Disable |
Enable |
Configuration → Equipment |
|
Attribute Discovery Timer (atd_tmr) |
1–200 msec |
20 |
|
RPR Protection Wait-to-Restore (prot_wtr) |
0–1440 seconds |
0 |
|
RPR Protection Fast Timer (prot_fasttmr) |
1–20 msec |
10 |
|
RPR Protection Slow Timer (prot_slowtmr) |
1–200 msec |
20 |
|
RPR Protection Holdoff Timer (prot_hotmr) |
0–250 msec |
0 |
|
RPR Protection Keep Alive Timer (prot_katmr) |
2-250 msec |
3 |
|
Primary Transit Queue Size (ptqsize) |
ED-RPR
(P, G) |
2000–51200 |
5000 |
Configuration → Equipment |
|
Secondary Transit Queue Size (stqsize) |
2000 - 4194304 |
1800000 |
|
Secondary Transit Queue Full Threshold (stqfullthr) |
2000 - 4194304 |
1795000 |
|
Topology Stability Timer (tstab_tmr) |
10–100 |
40 |
|
Fairness Ramp Coefficient (fair_ramp) |
ED-RPR
(P, G) |
4–9 |
6 |
Configuration → Equipment |
|
Fairness Low Pass Coefficient (fair_lp) |
4–11 |
6 |
|
Fairness Advertisement Ratio (fair_advert) |
1–40 |
5 |
|
Fairness STQ High Threshold (fair_stqhi) |
0–1000 |
250 |
|
Fairness STQ Low Threshold (fair_stqlo) |
0–1000 |
500 |
|
Fairness Maximum Add Rate (fair_maxrate) |
0–1200 |
1200 |
|
Fairness Aging Coefficient (fair_agec) |
0–4 |
2 |
|
Reserved Class A Add Rate (rsv_a) |
0–1200 Mb/s |
0 |
|
Reserved Class B Add Rate (rsv_b) |
0–1200 Mb/s |
0 |
|
VCG Monitoring Mode (vmode) |
ED-VCG-RPR
(P, G) |
auto, nmon |
auto |
Configuration → Equipment |
|
Alarm Severity Assignment Profile (pfname) |
ENT-ASAP-ASGNMT
(P, G) |
DEFAULT ASAP
User-Created ASAP |
DEFAULT ASAP |
|
VCG PM Enable (vpm) |
ED-VCG-RPR
(P, G) |
Enable, Disable |
Enable |
Performance → Prov PM Settings |
|
RPR IF Monitoring Mode (ifmode) |
auto, nmon |
auto |
Configuration → Equipment |
|
Valid Port Tag Add List (addporttag) |
Ampersand separated list (1–4093) |
None |
|
Valid Port Tag Delete list (delporttag) |
Ampersand separated list (1–4093) |
None |
|
Tag Filter (tagfilter) |
Enable, Disable |
Enable |
|
MTU (Maximum Transmission Unit) Size (mtu_size) |
46 - 10222 |
1508 |
|
Ethernet Type Field (ethertype) |
0601 to FFFF (hexadecimal) |
FFFF |
|
LCAS Mode (lcasmd) |
Enable, Disable |
Enable |
|
Hold-Off Timer (htmr) |
0–10000 msec, 99,999
LNW78: 99,999 |
99,999 |
|
Virtual Concatenation Mode (vcat) |
Enable, Disable |
Enable |
|
Total Queue Size (qsz) |
ED-VCG-RPR
(P, G) |
For LNW78 with vlantagmd=switched 0 - 256. |
256 |
Configuration → Equipment |
|
Yellow Packet Min Drop Threshold (qminthldy) |
0 - 100% |
33 |
|
Yellow Packet Max Drop Threshold (qmaxthldy) |
0 - 100% |
50 |
|
Green Packet Min Drop Threshold (qminthldg) |
0 - 100% |
90 |
|
CoS 1 Packets Drop Probability Mark (qdropwt1) |
0 - 100% |
100 |
|
CoS 2 Packets Drop Probability Mark (qdropwt2) |
0 - 100% |
100 |
|
CoS 3 Packets Drop Probability Mark (qdropwt3) |
0 - 100% |
50 |
|
Lead Port (leadport) |
ENT-LAGRP
(P, G) |
Ethernet LAN port AID |
None |
Configuration → Data → Provision LA Group |
|
Ethernet/LAN Port List (eplst) |
Ethernet LAN port AID |
None |
|
Add Ethernet/LAN port list (addep) |
ED-LAGRP
(P, G) |
Ampersand separated list of Ethernet/LAN port AIDs |
None |
|
Delete Ethernet/LAN port list (delep) |
Ampersand separated list of Ethernet/LAN port AIDs |
None |
|
Hash Type (hashtype) |
ENT-LAGRP
ED-LAGRP
(P, G) |
MAC, IP |
MAC |
|
Protocol |
LACP, NONE |
LACP |
|
Active/standby mode (asmode) |
Enable, Disable |
Disable |
|
Actor System Priority (actsyspri) |
0 to 65535 |
32768 |
|
ERP port list (ERPport) |
ENT-ERP
(P, G) |
An ampersand-separated list of 2 port AIDs. |
|
Configuration → Data → Create/Modify/Delete ERP |
|
RPL (Ring Protection Link) identification (protlink) |
Ethernet port or VCG AID of one of the 2 ERP ports. A ring requires one (and only) one RPL. |
|
|
VLAN identifier (vlan) |
ENT-ERP
ED-ERP
(P, G) |
1-4093 |
|
Configuration → Data → Create/Modify/Delete ERP |
|
Wait-to-Restore timer (wtr) |
1-12 minutes |
5 minutes |
|
Guard timer (guard) |
10-2000 milliseconds in steps of 10 milliseconds |
500 milliseconds |
|
Maintenance Domain Level (mdlevel) |
0-7 |
1 |
|
Propagation of Topology Change (TC) messages (proptc) |
Enable, Disable |
Disable |
|
ERP instance state (state) |
Enable, Disable |
Enable |
|
R-APS PDU priority (pri) |
0-7 |
7 |
|
Note: The TL1 command security access levels are Privileged (P), Administration (A), General (G), Maintenance (M), and Reports-only (R). 1 The default values are:
-
CoS 0: 0–9&11&13&15&26&28&30&34&36&38&44&50&52&54&58&60&62
-
CoS 1: 16–25&27&29&31
-
CoS 2: 10&12&14&32&33&35&37&39&40&43&45&47&64
-
CoS 3: 46&48&49&51&53&55-57&59&61&63
2 LNW70, LNW170, and LNW78 circuit packs only.
3 LNW71 circuit packs only. |