Miscellaneous parameters

The following table shows miscellaneous provisionable parameters.

Table A-11: Miscellaneous parameters

Parameter

TL1 Commands (Access) (Note)

Range

Default

Related WaveStar® CIT Commands

Alarm Clear Delay (clrdel)

SET-ATTR- ALM

(P, G)

0–30 sec.

10

Configuration → Alarms → Alarm Configuration

Incoming Signal Alarm Delay (almdel)

0–30 sec.

2

Miscellaneous Discrete Alarm Notification Code (ntfcncde)

SET-ATTR- ENV

(P, G)

CR, MJ, MN, NA

1–14: MN

15: MJ

16–19: MN

Configuration → Misc. Discretes

Miscellaneous Discrete Alarm Type (almtype)

1–10 alphanumeric characters

1–14: MISC

15: not provisionable

16–19: MISC

Miscellaneous Discrete Alarm Message (almmsg)

Up to 26 alphanumeric and symbolic characters (case-sensitive)

1–14: environment

15: not provisionable

16–19: environment

Miscellaneous Discrete Control Type (conttype)

SET-ATTR- CONT

(P, G)

Up to 26 alphanumeric and symbolic characters (case-sensitive)

control (1–4)

Note: The TL1 command security access levels are Privileged (P), Administration (A), General (G), Maintenance (M), and Reports-only (R).

November 2011Copyright © 2011 Alcatel-Lucent. All rights reserved.