Date

ED-DAT

(P)

YY-MM-DD (00-01-01 — 99-12-31)

70-01-01

Administration → Set Date and Time

Time

HH-MM-SS (00-00-00 — 23-59-59)

00:00:00

NE's DCC Side

ENT-FECOM

(P)

NS (network side),

US (user side)

(function of slot, dcc AID and protection mode)

Configuration → DCC Terminations

OSI Communication (com)

Enabled, Disabled

Enabled-front Disabled-rear

LAN Reset

lan-1, lan-2

lan-1

Administration → Reset IAO LAN

IP Address of the System (ipaddr)

ENT-ULS

(P)

32-bit IP address; 4 dot-separated decimal numbers from 0–255

169.254.1.1

Administration → Data Communications

IP Default Router Address (ipdrad)

32-bit IP address; 4 dot-separated decimal numbers from 0–255

None

IP Subnet Mask for IAO LAN Ports (ipsnmk)

32-bit IP address; 4 dot-separated decimal numbers from 0–255

255.255.0.0

TCP/IP communication over the specified IAO LAN port or DCC port (tcpip)

Enabled, Disabled

Enabled

Administration → Data Communications

Configuration → DCC Terminations

Proxy ARP (proxyarp)

Enabled, Disabled

Disabled

Administration → Data Communications

Alarm Gateway NE (agne)

ENT-SYS

(P)

Yes, No

No

Administration → Set NE

Alarm Group Number (almgrp)

1–255

255

Remote NE Status (rnestat)

Enabled, Disabled, Enable Far-End

Disabled

FTAM-FTP Gateway (ftamftpgw)

Enabled, Disabled

Disabled

File Transfer Protocol (ftp)

Enabled, Disabled

Enabled

Security Log Overflow Message (slogthrshid)

0% to 90%

(10% increments)

90%

History Log Overflow Message (hlogthrshid)

0% to 90%

(10% increments)

90%

TL1 TCP/IP Gateway NE (tcpipgw)

Enabled, Disabled

Enabled

Administration → Data Communications

Target Identifier (TID)

20 alphanumeric or special characters: "-" (hyphen), "." (period)

LT-DMXtend

Administration → Set TID

Alarm Severity Assignment Profile (pfname)

ENT-ASAP-ASGNMT

(P, G)

DEFAULT ASAP

User-Created ASAP

DEFAULT ASAP

Configuration → Equipment

Wait-to-restore (wtr) (1+1 and 1+1_BIDIR)

ED-PROTN- GRP

(P, G)

0–12, (1+1 and 1+1_BIDIR)

5

Network Time Protocol (ntp)

ENT-SYS

(P)

Enabled, Disabled, reset

Enabled

Administration → Set Network Time Protocol

Coordinated Universal Time Offset (utco)

-24:00 to +24:00 exclusive

0

Network Element Mode (nemode)

normal, ring-upgrade

normal

Configuration → Ring Upgrade Mode

System Contact (syscontact)

Contact person for NE

None

Administration → Data Communications

System Location (syslocation)

Physical location of NE

None

SNMP Authentication Trap (snmpauthtrap)

Enable, Disable

Enable

Idle Channel Signal (Idle) (Insert AIS or Unequipped Signal)

ais, unequipped

ais

Configuration → Equipment

1+1 Protection Switch Priority (uniprotprio)

FRCD, SFPROT

FRCD

Autolock Count (autolcnt)

0 to 20

0

Autolock Switch Interval (autolswint)

1 to 1440

25

Autolock Release Interval (autolrelint)

1 to 1440

1440

Loopback Condition reporting (lpbkcond)

ENT-SYS

(P)

Enabled, Disabled

Enabled

Configuration → Equipment

RADIUS Authentication (radius)

Enabled, Disabled

Disabled

Target/Source Identifier (sid)

SET-SID

(P)

20 alphanumeric or special characters: "-" (hyphen), "." (period)

None

Administration → Set TID

Serial Port Baud Rate (baudrate)

ENT-CID-SECU

(P, A, G, M, R)

1200, 2400, 4800, 9600, 19200

9600

Administration → Data Communications

Serial Port Echo (echo)

Enable, Disable

Enable

OSI Level 2 Router (l3lv2is)

ENT-ULSDCC-L3

(P)

Enable, Disable

Disable

NSAP Address (l3org, l3res, l3rd, l3area)

L3ORG, L3RES, L3RD, L3AREA

L3ORG: 000000

L3RES: 0000 L3RD: 0000 L3AREA: 0000

NSAP Threshold Level (nsapthlev)

0 to 250

0

TARP Data Cache (l4etdc)

ENT-ULSDCC-L4

(P)

Enable, Disable

Enable

TARP Data Cache Manual Entries

ENT-ULSDCC-L4

DLT-ULSDCC- L4

(P)

Maximum number of 16 entries, with up to 15 entries that may be manually entered

None

TARP Lifetime (l4tlif)

ENT-ULSDCC-L4

(P)

1 - 65535

100

Administration → Data Communications

TARP Loop Detection Buffer Flush Timer (l4lftm)

1 - 1440 minutes

5 minutes

TARP Manual Adjacency

ENT-ULSDCC-L4

DLT-ULSDCC- L4

(P)

None

TARP T1 Timer (l4t1tm)

ENT-ULSDCC-L4

(P)

1 - 3600 seconds

15 seconds

TARP T2 Timer (l4t2tm)

1 - 3600 seconds

25 seconds

TARP T3 Timer (l4t3tm)

1 - 3600 seconds

40 seconds

TARP T4 Timer (l4t4tm)

1 - 3600 seconds

20 seconds

TCP/IP Calling Address (tcpipaddr)

ENT-IPMAP

(P)

32-bit IP address of the OS; 4 dot-separated decimal numbers from 0–255

0

ACID (Application Context ID) to be assigned to a TCP/IP address or IP Host

1–23 alphanumeric characters

TL1 PEERCOMM

Host name assigned to a TCP/IP address (tcpiphost)

1–24 alphanumeric characters

None

Application Context Identifier (acid)

ENT-TL1MSGMAP

(P)

TL1PEERCOMM, TL1MAINTENANCE, TL1MEMORY- ADMINISTRATION, TL1TEST, TL1OTHER1, TL1OTHER2

None

Administration → Set TL1 Message Map

TL1 Autonomous Message Type (msgtype)

ALM (REPT ALM)

ENV (REPT ALM ENV)

CON (REPT COND)

DB (REPT DBCHG)

EVT (REPT EVT)

PM (REPT PM)

SW (REPT SW)

CONNCHG(REPT CONNCHG)

CONNEVT (REPT CONNEVT)

None

Action

Enabled, Disabled

None

LINEn (n=1 -11)

ENT-BANNER

(P, A)

Max 11 lines (maximum of 60 characters per line)

Total banner size cannot exceed 360 characters.

None

Administration → Change NE Login Banner

Application Context Identifier (acid)

ENT-OSACMAP

DLT-OSACMAP

(P)

TL1PEERCOMM, TL1MAINTENANCE, TL1MEMORY- ADMINISTRATION, TL1TEST, TL1OTHER1, TL1OTHER2, TL1CR

(function of VC and SPA)

Administration → Data Communications

TAP Learn Status (tlearnstat)

ED-IP-TUNNEL

(P)

Enable, Disable

Disable

Administration → Data Communications

TAP Advertise Status (tadverstat)

Enable, Disable

Disable

TAP Group Number (tapgroup)

0–65535

0

Time Change Threshold (timechg)

ED-NTP

(P)

1 to 499 msec

128 msec

Administration → Set Network Time Protocol

Minimum Poll Interval to NTP Server (minpinvl)

16–16384 seconds and values are powers of two

64 seconds

Maximum Poll Interval to NTP Server (maxpinvl)

16–16384 seconds and values are powers of two

1024 seconds

Maximum Adjustment Threshold (maxadj)

500 - 10000 msec

1000 msec

IP Address of NTP server(s) (ipaddr)

ENT-NTP- SERVER

DLT-NTP- SERVER

(P)

32 bit IP address

None

Destination IP address (dest_ip)

ENT-IP-ROUTE

(P)

32-bit IP address; 4 dot-separated decimal numbers from 0–255

None

Administration → Data Communications

Destination IP subnet mask (dest_mask)

32-bit IP subnet mask; 4 dot-separated decimal numbers from 0–255

None

Next-Hop Port Type (nxthopport)

lan,clnp_tunnel, DCC

clnp_tunnel

Next-Hop Address (nxthopadr)

ENT-IP-ROUTE

(P)

IP address (for LAN) or NSAP address (for clnp_tunnel)

Not required for DCC.

None

Administration → Data Communications

Tunnel Auto Provisioning (TAP) Advertise (tapadver)

Yes, No

Not required for DCC.

Yes

Tunnel Auto Provisioning (tap) Cost (tapcost)

0–65535

Not required for DCC.

20

Profile Type (pftype)

ENT-ASAP- PROF ED-ASAP- PROF INIT-ASAP- PROF

(P, G)

Bidirectional 1+1, Optimized 1+1, DATA, DS1, DS3, E1, EC1, Circuit Pack, FELAN, GELAN, NVM, OCN, OCH, OTS, OTU2, Pluggable Transmission Module, STSN, System, System Timing, VC, VCG, VCGSTS, VCGVT, VT1.5

None

Configuration → Alarms → Alarm Severity Assignment Profile

Profile Name (pfname)

This is an alphanumeric character string (including the hyphen) with a maximum of 24 characters. The first character must be a letter. The characters are case insensitive.

DEFAULT

Alarm Severity Levels¹

Critical (CR), Major (MJ), Minor (MN), Not Alarmed (NA), Not Reported (NR)

None

Note: The TL1 command security access levels are Privileged (P), Administration (A), General (G), Maintenance (M), and Reports-only (R).

¹ Refer to Alcatel-Lucent 1665 Data Multiplexer Extend (DMXtend) Alarm Messages and Trouble Clearing Guide, 365-372-326 for detailed information about ASAPs and default alarm severity levels.