Procedure 5-72: Clear "Inconsistent crs map" alarm
Before you begin
Prior to performing this procedure:
-
Refer to Before you begin and Required equipment in this chapter.
-
Refer to Electrostatic discharge in Chapter 1, Safety.
-
Locate the most recent backup copy of the network element database.
Steps
Complete the following steps to clear the Inconsistent crs map alarm.
1 |
Restore the most recent network element database using the Configuration → Software → Remote Restore command. Reference: |
2 |
When the system reset is complete, log in to the network element. Reference: Procedure 6-2: Connect Personal Computer (PC) and establish WaveStar® CIT session End of steps |