Procedure 5-84: Clear "NSAP count in L1 overflowed" alarm
Before you begin
Prior to performing this procedure, refer to Before you begin and Required equipment in this chapter.
Steps
Complete the following steps to clear an NSAP count in L1 overflowed alarm.
1 |
Re-engineer the leve1 1 routing area as required to drop the NSAP count to or below 250 nodes. Reference: Alcatel-Lucent 1665 Data Multiplexer Extend (DMXtend) Applications and Planning Guide, 365-372-324 |
2 |
From the System View, click the Alarm List button and click Refresh. Result: The NSAP count in L1 overflowed alarm is no longer present. End of steps |