Clear "NSAP count in L1 threshold crossed" alarm

This procedure is used to clear an NSAP count in L1 threshold crossed alarm.

Prior to performing this procedure, refer to Before you begin and Required equipment in this chapter.

Complete the following steps to clear an NSAP count in L1 threshold crossed alarm.

Select Administration → Data Communications to access the NSAP Threshold Alarming tab and disable/reprovision the Threshold level,

Re-engineer the leve1 1 routing area as required to drop the NSAP count to or below the provisioned threshold.

Reference:

Alcatel-Lucent 1665 Data Multiplexer Extend (DMXtend) Applications and Planning Guide, 365-372-324

From the System View, click the Alarm List button and click Refresh.

Result:

The NSAP count in L1 threshold crossed alarm is no longer present.

End of steps