Procedure 5-86: Clear "NTP server(s) unreachable" condition
Before you begin
Prior to performing this procedure, refer to Before you begin and Required equipment in this chapter.
Steps
Complete the following steps to clear a NTP server(s) unreachable condition.
1 |
In the System View, select Administration → View Network Time Protocol to obtain the provisioned Network Time Protocol Server information. |
2 |
Verify that NTP Status is ENABLED and that a provisioned NTP server is available. If required, use office records and Administration → Set Network Time Protocol to make the required provisioning changes. |
3 |
If required, consult and follow local procedures to restore access to an NTP server. End of steps |