Procedure 5-101: Clear "RPR Topology Exceeded Max Stations" condition
Before you begin
Prior to performing this procedure:
-
Refer to Before you begin and Required equipment in this chapter.
-
Refer to Electrostatic discharge in Chapter 1, Safety.
Steps
Complete the following steps to clear the RPR Topology Exceeded Max Stations condition.
1 |
From the WaveStar® CIT System View, click the Alarm List button and locate the RPR Topology Exceeded Max Stations condition in the resulting alarm list and note the corresponding VCG AID. |
2 |
Important! The number of nodes in the ring has exceeded the maximum of 255 nodes. Follow local procedures to reengineer the ring to reduce the number of nodes to 255 or less. Reference: Alcatel-Lucent 1665 Data Multiplexer Extend (DMXtend) User Operations Guide, 365-372-325 End of steps |