Alcatel-Lucent 1850 TSS-5 provides a report that lists the number of performance-monitoring parameters, related to SONET/SDH, Ethernet, DS1/E1, and DS3 operations, that have crossed their thresholds. This report provides a snapshot of the system performance level. If there is signal degradation, it is quickly pinpointed so that corrective action may be taken before customers are affected, thus supporting proactive maintenance.
This report provides separate parameter summaries for each signal level in the system for the following:
SONET section, line, and path
SDH multiplex and regenerator sections and path
DS3 line and path
DS1 line and path
E1 line and path
Dropped incoming or outgoing Ethernet bytes and frames
The parameter summaries show the user which performance status to request if they want further information.
These reports provide detailed information on the current and previous 8 hours in quarter-hour (15-minute) increments, as well as the current and previous day's performance. Threshold crossing alerts are clearly identified and the time the performance registers were last initialized is also shown. Any registers that may have been affected by this initialization are marked. There are separate reports for section, line, and path parameters, as well as Ethernet parameters.
Beginning n Release 7.0.2, global PM file collection is supported for the VLNC4x packs. Beginning n Release 7.2.2, global PM file collection is supported for the VLNC5x packs. The global PM file generation commands align with the Alcatel-Lucent 1350 OMS PM data collection strategy. The commands allow the user to periodically package the PM history bins into a series of files that can be copied to the Alcatel-Lucent 1350 OMS server. The user can access the new commands via TL1 cut-through mode.
Refer to Alcatel-Lucent 1850 Transport Service Switch (TSS-5) TL1 Command Guide for MSPP for details on the following commands related to global PM file generation:
| Copyright © 2011 Alcatel-Lucent. All rights reserved. |