Date

ED-DAT

(P)

YY-MM-DD (00-01-01 — 99-12-31)

70-01-01

Administration → Set Date and Time

Time

HH-MM-SS (00-00-00 — 23-59-59)

00:00:00

NE's DCC Side (side)

ENT-FECOM

(P)

NS (network side),

US (user side)

(function of slot, dcc AID and protection mode)

Configuration → DCC Terminations

Type

OSI, Dual

OSI

Mode

AITS, UITS

AITS

OSI Communication (com)

Enabled, disabled

enabled

LAN Reset

lan-1

lan-1

Administration → Reset IAO LAN

IP Address of the System (ipaddr)

ENT-ULS

(P)

32-bit IP address; 4 dot-separated decimal numbers from 0-255

169.254.1.1

Administration → Data Communications

IP Default Router Address (ipdrad)

32-bit IP address; 4 dot-separated decimal numbers from 0-255

None

IP Subnet Mask for IAO LAN Ports (ipsnmk)

32-bit IP address; 4 dot-separated decimal numbers from 0-255

255.255.0.0

TCP/IP communication on the specified IAO LAN port(s), or on the DCC (tcpip)

Enabled, disabled

Enabled

Proxy ARP (proxyarp)

ENT-ULS

(P)

Enabled, Disabled

Disabled

Administration → Data Communications

Alarm Gateway NE (agne)

ENT-SYS

(P)

Yes, No

No

Administration → Set NE

Alarm Group Number (almgrp)

1-255

255

Remote NE Status (rnestat)

Enabled, disabled

disabled

FTAM-FTP Gateway (ftamftpgw)

Enabled, disabled

disabled

File Transfer Protocol (ftp)

Enabled, disabled

enabled

Security Log Overflow Message (slogthrshid)

0% to 90% (10% increments)

90%

History Log Overflow Message (slogthrshid)

0% to 90% (10% increments)

90%

TL1 TCP/IP Gateway NE (tcpipgw)

Enabled, Disabled

Enabled

Administration → Data Communications

Target Identifier (TID)

20 alphanumeric or special characters:

"-" (hyphen), "." (period)

ALU-TSS-5

Administration → Set TID

Network Time Protocol (ntp)

Enabled, disabled, reset

enabled

Administration → Set Network Time Protocol

Coordinated Universal Time Offset (utco)

-24:00 to +24:00 exclusive

0

NE Mode for Ring Upgrade (nemode)

ENT-SYS

(P)

normal, ring-upgrade

normal

Configuration → Ring Upgrade Mode

System Contact (syscontact)

ENT-SYS

(P)

Contact person for NE

None

Administration → Data Communications

System Location (syslocation)

Physical location of NE

None

SNMP Authentication Trap (snmpauthtrap)

Enable, Disable

Enable

Idle channel signal (idle)

ENT-SYS

(P)

ais, unequipped

ais

Configuration → Equipment

RADIUS Authentication (radius)

Enabled, Disabled

Disabled

Target/Source Identifier (sid)

SET-SID

(P)

20 alphanumeric or special characters:

"-" (hyphen), "." (period)

Administration → Set TID

Serial Port Baud Rate (baudrate)

ENT-CID-SECU

(P, A, G, M, R)

1200, 2400, 4800, 9600, 19200

9600

Administration → Data Communications

Serial Port Echo (echo)

Enable, disable

enable

OSI Level 2 Router (l3lv2is)

ENT-ULSDCC-L3

(P)

Enable, disable

disable

NSAP Address (l3org, l3res, l3rd, l3area, l3idp, l3dfi)

L3ORG, L3RES, L3RD, L3AREA, L3IDP, L3DFI

L3ORG: 000000

L3RES: 0000 L3RD: 0000 L3AREA: 0000 L3IDP: 39840f (SONET), 390000 (SDH) L3DFI: 80

NSAP Threshold Level (nsapthlev)

0 to 50

0

Router ID (routerid)

32-bit IP address; 4 dot-separated decimal numbers from 0-255.

None

TARP Data Cache (l4etdc)

ENT-ULSDCC-L4

(P)

Enable, disable

enable

TARP Data Cache Manual Entries

ENT-ULSDCC-L4 DLT-ULSDCC- L4

(P)

Up to manual 15 entries

(none)

Administration → Data Communications

TARP Lifetime (l4tlif)

ENT-ULSDCC-L4

(P)

1 - 65535

100

TARP Loop Detection Buffer Flush Timer (l4lftm)

1 - 1440 minutes

5 minutes

TARP Manual Adjacency

ENT-ULSDCC-L4

DLT-ULSDCC- L4

(P)

(none)

Administration → Data Communications

TARP T1 Timer (l4t1tm)

ENT-ULSDCC-L4

(P)

1 - 3600 seconds

15 seconds

TARP T2 Timer (l4t2tm)

1 - 3600 seconds

25 seconds

TARP T3 Timer (l4t3tm)

1 - 3600 seconds

40 seconds

TARP T4 Timer (l4t4tm)

1 - 3600 seconds

20 seconds

TCP/IP Calling Address (tcpipaddr)

ENT-IPMAP

(P)

32-bit IP address of the OS; 4 dot-separated decimal numbers from 0-255

0

ACID (Application Context ID) to be assigned to a TCP/IP address or IP Host

1-23 alphanumeric characters

TL1 PEERCOMM

Host name assigned to a TCP/IP address (tcpiphost)

1-24 alphanumeric characters

NULL

LINEn (n=1-11)

ENT-BANNER

(P, A)

Max 11 lines (maximum of 60 characters per line)

Total banner size cannot exceed 420 characters.

Administration → Change NE Login Banner

Application Context Identifier (acid)

ENT-TL1MSGMAP

(P)

TL1PEERCOMM TL1MAINTENANCE TL1MEMORYADMINISTRATION TL1TEST

TL1OTHER1

TL1OTHER2

Administration → Set TL1 Message Map

TL1 Autonomous Message Type (msgtype)

ENT-TL1MSGMAP

(P)

ALM (REPT ALM)

ENV (REPT ALM ENV)

CON (REPT COND)

DB (REPT DBCHG)

EVT (REPT EVT)

PM (REPT PM)

SW (REPT SW)

Administration → Set TL1 Message Map

Action

enabled, disabled

Application Context Identifier (acid)

ENT-OSACMAP DLT-OSACMAP (P)

TL1PEERCOMM TL1MAINTENANCE TL1MEMORYADMINISTRATION

TL1TEST

TL1OTHER1

TL1OTHER2

TL1CR

Administration → Data Communications

TAP Learn Status (tlearnstat)

ED-IP-TUNNEL

(P)

Enable, disable

enable

Administration → Data Communications

TAP Advertise Status (tadverstat)

Enable, disable

enable

TAP Group Number (tapgroup)

0-65535

0

Selector

04 (hex), f0 (hex)

04 (hex)

Time Change Threshold (timechg)

ED-NTP

(P)

1 to 499 msec

128 msec

Administration → Set Network Time Protocol

Minimum Poll Interval to NTP Server (minpinvl)

16-16384 seconds and values are powers of two

64 seconds

Maximum Poll Interval to NTP Server (maxpinvl)

ED-NTP

(P)

16-16384 seconds and values are powers of two

1024 seconds

Administration → Set Network Time Protocol

Maximum Adjustment Threshold (maxadj)

500 - 10000 msec

1000 msec

IP Address of NTP server(s) (ipaddr)

ENT-NTP- SERVER

DLT-NTP- SERVER

(P)

32 bit IP address

Destination IP address (DEST_IP)

ENT-IP-ROUTE

(P)

32-bit IP address; 4 dot-separated decimal numbers from 0-255

Administration → Data Communications

Destination IP subnet mask (dest_mask)

32-bit IP subnet mask; 4 dot-separated decimal numbers from 0-255

Next-Hop Port Type (nxthopport)

lan,clnp_tunnel

clnp_tunnel

Next-Hop Address (nxthopadr)

ENT-IP-ROUTE

(P)

IP address (for LAN) or NSAP address (for clnp_tunnel)

Administration → Data Communications

Tunnel Auto Provisioning (TAP) Advertise (tapadver)

Yes, No

Yes

Tunnel Auto Provisioning (tap) Cost (tapcost)

0-65535

20

Note: The TL1 command security access levels are Privileged (P), Administration (A), General (G), Maintenance (M), and Reports-only (R).