The following table shows the provisionable channel parameters.
|
Parameter |
TL1 Commands (Access) (Note) |
Range |
Default |
Related WaveStar® CIT Commands |
|---|---|---|---|---|
|
Alarm Indication Signal (ais) Notification for Non-Service Affecting Alarms (aisnc) |
ENT-STS1 ENT-STS3c ENT-STS12c ENT-VT1 (P, G) |
MN, NR |
MN |
Configuration → Equipment |
|
Primary State (pst) |
ENT-STS1 ENT-STS3c ENT-STS12c ENT-VC12 ENT-VC3 ENT-VC4 ENT-VC44C ENT-VT1 (P, G) |
OOS-MA-AS (AUTO), OOS (NMON) |
AUTO NMON (pass-through) | |
|
TCA Monitoring Mode (tcamd) |
ENT-STS1 ENT-STS3c ENT-STS12c ENT-VC12 ENT-VC3 ENT-VC4 ENT-VC44C ENT-VT1 (P, G) |
Enable, Disable |
Enable |
Performance → Prov PM Settings |
|
Signal Degrade Threshold (sfthr) |
ENT-STS1 ENT-STS3c ENT-STS12c ENT-VC3 ENT-VC4 ENT-VC44C (P, G) |
-5, -6, -7, -8, -9 |
-6 |
Configuration → Equipment |
|
ENT-VT1 ENT-VC12 (P, G) |
-5, -6, -7, -8 |
-6 | ||
|
Alarm Indication Signal Notification for Service Affecting Alarms (aisncsa) |
ENT-STS1 ENT-STS3c ENT-STS12c ENT-VC3 ENT-VC4 ENT-VC44C (P, G) |
CR, NA |
CR | |
|
ENT-VT1 ENT-VC12 (P, G) |
MJ, NA |
MJ | ||
|
Signal Fail Threshold (sfail) |
ENT-STS1 ENT-STS3c ENT-STS12c ENT-VC3 ENT-VC4 ENT-VC44C (P, G) |
-3, -4, -5 |
-3 | |
|
Note: The TL1 command security access levels are Privileged (P), Administration (A), General (G), Maintenance (M), and Reports-only (R). | ||||
| Copyright © 2011 Alcatel-Lucent. All rights reserved. |