Procedure 6-5.1: Provision Free Running timing mode

- Overview

Important!

This is not a stand-alone procedure. Perform this procedure only as directed by Procedure 6-5: Network synchronization provisioning.

Steps

Complete the following steps to provision the network element Timing Mode to Free Running.

 
1

From the System View menu, select Configuration → Timing/Sync.

Result:

The Configure Timing/Sync window opens.

2

Select the System Timing tab.

3

From the Timing Mode drop-down menu, select Free Running.

4

If the faceplate and backplane Gigabit Ethernet ports of the VLNC52/55 SONET/SDH Transport circuit pack are required to support Synchronous Ethernet, select Enabled for Synchronous Ethernet.

5

Click OK.

Result:

A warning message may appear. Click Yes to execute the command.

End of steps

Copyright © 2011 Alcatel-Lucent. All rights reserved.