Procedure 4-9: Provision VLNC50/52/55 LAN pluggable transmission module socket
Before you begin
Prior to performing this procedure:
-
Refer to Before you begin and Required equipment in this chapter.
-
Obtain the work instructions for this procedure.
-
Verify the work instruction specify the parameters and values to be provisioned.
Steps
Complete the following steps to provision the VLNC50/52/55 LAN pluggable transmission module socket.
1 |
From the System View window, select Configuration → Equipment. Result: The Configure Equipment window opens. |
2 |
Expand the equipment list by clicking on the plus (+) sign next to the required group. Select the required pluggable transmission module socket (PTM sc1) and click Select. Result: The pluggable transmission module parameters appear. |
3 |
Provision the required pluggable transmission module parameters according to the work instructions, then click Apply if changes were made. If no changes were made, click Close to exit. Result: A dialog box may appear asking you to confirm executing this command. Click Yes to apply the changes. Click Close to exit. End of steps |