Procedure 5-55: Clear "NSAP count in L1 threshold crossed" alarm
Before you begin
Prior to performing this procedure, refer to Before you begin and Required equipment in this chapter.
Steps
Complete the following steps to clear an NSAP count in L1 threshold crossed alarm.
1 |
Use the Administration → Data Communications command to access the NSAP Threshold Alarming tab and disable/reprovision the Threshold level, OR Re-engineer the leve1 1 routing area as required to drop the NSAP count to or below the provisioned threshold. Reference: Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Product Information and Planning Guide |
2 |
From the System View, click the Alarm List button and click Refresh. Result: The NSAP count in L1 threshold crossed alarm is no longer present. End of steps |