Indicates a difference between the framing of the incoming DS3 signal (from the DSX) and the provisioned framing mode of the receiving port.
Alarm Data |
Value/Meaning |
---|---|
Severity Levels |
Critical (CR), Major (MJ), Minor (MN), Not Alarmed (NA) Default: Critical (CR) |
AID Type |
DS3 Port |
Date |
Month/day/year that condition was detected |
Time |
Hour:minute:second that condition was detected |
Probable Cause |
CBITMM (C-Bit Mismatch) |
Effect on Service |
SA or NSA |
Alarm Entity Type |
T3 |
Description |
inc. DS3 Cbit Mismatch |
Likely Cause |
The incoming DS3 signal is provisioned for the M13 frame format and the local DS3 port is provisioned for the CBIT frame format. |
Visible Indication |
Lighted CR/MJ or MN/ABN LED on SYSCTL faceplate and a flashing FAULT LED on the alarmed circuit pack. |
Action |
Proceed to Procedure 5-24: Clear "inc. DS3 Cbit Mismatch" alarm. |
Copyright © 2011 Alcatel-Lucent. All rights reserved. |