The system cannot communicate with the far end system through the SONET section or SDH regenerator section (RS) data communications channel (DCC).
|
Alarm Data |
Value/Meaning |
|---|---|
|
Severity Levels |
Minor (MN) |
|
AID Type |
Data Comm Channel |
|
Date |
Month/day/year that condition was detected |
|
Time |
Hour:minute:second that condition was detected |
|
Probable Cause |
EOC (EOC Failure) |
|
Effect on Service |
NSA |
|
Alarm Entity Type |
COM |
|
Description |
DCC channel failed |
|
Likely Cause |
The SYSCTL circuit pack failed, reset, or initialized at the far end. The program installation failed at the far end. The program installation is in progress at the far end. The circuit pack failed at the near end. |
|
Visible Indication |
Lighted MN/ABN LED on SYSCTL faceplate. |
|
Action |
Proceed to Procedure 5-15: Clear "DCC channel failed" alarm. |
| Copyright © 2011 Alcatel-Lucent. All rights reserved. |