Assign access control list to Ethernet interface

Use this procedure to assign a provisioned IP or MAC access control list to an Ethernet interface.

Obtain the work instructions for this procedure.

From the Navigation menu, select QoS → Access Control Lists → Interface Configuration.

Result:

The ACL Interface Configuration screen appears.

Enter the required parameters, then click Submit.

If assigning...	Then...
an IP access control list to an Ethernet interface,	From the Navigation menu, select QoS → IP Access Control Lists → Summary and verify that the required parameters were provisioned correctly.
an MAC access control list to an Ethernet interface,	From the Navigation menu, select QoS → MAC Access Control Lists → Summary and verify that the required parameters were provisioned correctly.

Result:

The ACL Summary screen appears.

End of steps