The VLNC4x/VLNC6x contains up to two software loads, referred to as Image1 and Image2. Use this procedure to copy one software load from one image slot to the other image slot. This is done so that the system has a backup in case one image slot becomes corrupted.
1 |
From the Navigation menu, select System → System Utilities → Copy Image. Result: The Copy Image window opens. Equivalent CLI command: copy image1 image2 or copy image2 image1. See Procedure 4-2: Copy VLNC4x/VLNC6x software image from one Image slot to the other Image slot. |
2 |
Select the image to be copied from in the Copy From Image Name dropdown box. Select the image to be copied to in the Copy To Image Name box. Click Submit. End of steps |
| Copyright © 2011 Alcatel-Lucent. All rights reserved. |