Procedure 14-5.4: Assign class/policy to incoming Ethernet interface
Overview
Use this procedure to associate a provisioned DiffServ class/policy association to an Ethernet interface in the incoming direction.
DiffServ is not used in the outgoing direction.
Before you begin
Obtain the work instructions for this procedure.
Step
1 |
Log in to the VLNC4x circuit pack being provisioned. |
2 |
From the Navigation menu, select QoS → Differentiated Services → Service Configuration. Result: The DiffServ Service Configuration screen appears. |
3 |
Enter the required parameters, then click Submit. |
4 |
From the Navigation menu, select QoS → Differentiated Services → Service Summary and verify that the required parameters were provisioned correctly. Result: The DiffServ Service Summary screen appears. End of steps |