Login to the VLNC60/61/62.

Result:

The User EXEC prompt [(ALU switching)>] displays.

Enter the Global Config mode:

1. From the User EXEC prompt, enter enable to enter the Privileged EXEC mode.

2. From the Privileged EXEC prompt, enter configure to enter the Global Config mode.

Create a fragment-map-profile to be assigned later to the multilink interface you create. This command specifies the name of a fragment map profile. This profile is used to configure the size of fragments per class of an multilink interface. If no multiclass is configured, only fragment size 1 is applicable.

Refer to the fragment-map-profile <fragment-map-name> and fragment-size{1-4} <fragment-size>commands in the Alcatel-Lucent 1850 Transport Service Switch (TSS-5) Command Line Interface Guide for details.

Example: (ALU Switching)(Config)# fragment-map-profile FMProfile1

Example: (ALU Switching)(Config - fragmentmap)# fragment-size1 128

End of steps