The Alcatel-Lucent 1850 TSS-5 CLI based circuit packs can be managed using the CLI command interface or the Web GUI interface. This chapter provides a brief introduction to the Web GUI interface. It explains how to access the Web GUI interface and use the menu structure for system management and provisioning. For information about using the CLI command interface, refer to Chapter 2, Getting started.
Each VLNC4x or VLNC6x pack should be connected to the network and have its IP address configured first. The user then accesses the pack via the Web GUI by entering the IP address of the pack as the URL in the HTTP-enabled Web browser. The Login screen is displayed next. Once the user enters the valid username and password and connecting to the VLNC4x or VLNC6x pack is successful, then the Web GUI main page is displayed.
To access the Web GUI, the browser must support:
Procedure 3-1: Web Access Configuration
| Copyright © 2011 Alcatel-Lucent. All rights reserved. |